Monel Alloy 450 Sheet
Monel Alloy 450 Sheet
Monel Alloy 450 Sheet
Monel Alloy 450 Sheet

Monel Alloy 450 Sheet

Name: China Monel Alloy 450 Sheet Suppliers - Wholesale Monel Alloy 450 Sheet Made in China - Super Alloy
Brand: GNEE
SKU: 238629444

Monel 450 is a nickel-copper alloy with excellent corrosion resistance, strength and toughness, and weldability.It has superior mechanical properties at both low and high temperatures, and its unique composition makes it suitable for a wide range of applications in the oil and gas industry.

Send Inquiry

Chat Now

As a leading supplier and manufacturer in China, GNEE Steel provides cost-effective nickel-based alloy products.

Send E-mail: ss@gneesteel.com
Tel: +8615824687445

Product Introduction

Monel 450 or Alloy 450, houses a 70-30 combination of copper and nickel, respectively. This variant of the Monel alloy family comes with superior weldability. The alloy possesses fair resistance to bio-fouling or corrosion in the seawater.

With this alloy, you also get access to high fatigue strength along with optimum thermal conductivity. The Monel 450 is used excessively for the creation of condenser plates, seawater condensers, evaporator tubes, distiller tubes, saltwater piping, as well as tubes for heat exchange.

Chemical Properties:

Nickel (%)	Copper (%)	Iron (%)	Manganese (%)	Sulfur (%)	Zinc (%)	Lead (%)	Phosphorous (%)
29.0 to 33.0	Balance	0.4 to 1.0	1.0 Maximum	0.020 Maximum	1.0 Maximum	0.05 Maximum	0.020 Maximum

Mechanical Properties:

Yield Strength (Minimum)		Tensile Strength (Minimum)		Elongation (Minimum)
KSI	MPA	KSI	MPA	Percentage
24	165	56	385	46

Physical Properties:

Density	Thermal Conductivity	Melting Range		Electrical Resistivity
G/CM³	W/M.K	°C	°F	µΩ·m
8.91	29.4	1170 to 1240	2140 to 2260	412

Monel Alloy 450

Monel 450 Sheet Features

Superior Weldability: Given its combination of 70% copper and 30% nickel, it provides top-notch weldability.

Enhanced Fatigue Strength: The Monel 450 alloy can handle relatively high stress under exclusive circumstances, given its excellent fatigue strength.

Corrosion Resistance: The Monel 450 has amazing corrosion resistance against strong alkali, seawater, organic compounds, neutral solutions, and so on.

Possible Alternative Grades

1-Monel 400: Backed by excellent resistance to corrosion and high-strength, this nickel-copper alloy is the most popular among all Monel alloys.

2-Monel 401: It is a copper-nickel based alloy which is designed for specialized electronic applications. Plus, the Monel 401 alloy houses a low coefficient in terms of temperature resistance.

3-Monel R-405: This free-machining variant of the Alloy 400 houses controlled sulfur that acts as an efficient chip breaker while machining.

4-Monel K-500: This alloy made from nickel and copper is precipitation-hardened. It also comes with low permeability, which isn't magnetic when kept under -150^oF.