Mar 11, 2025 Leave a message

astm-b444-(1)-(1).pdf

Is Inconel The Same As Alloy 625?

Is Inconel the same as Alloy 625?

 

 

Alloy 625 and Alloy 718, commonly referred to as Inconel 625 and Inconel 718, are both nickel alloys, both are superalloys, and both are part of the Inconel family of alloys. So, what is the difference between Inconel 625 and 718?

What is the difference between Inconel 625 and 718?
We will analyze the differences between Inconel 625 and Inconel 718 below, from chemical composition to recommended uses. But first, let's talk about terminology.

Terminology
You may notice that we switch between Inconel 625 and Alloy 625 throughout this article. Rather than having you go and Google "Inconel 625 vs. Alloy 625" yourself, we wanted to explain what these names mean.

When we use the terms Inconel 625 and Alloy 625, we are referring to the same alloy. Inconel is a registered trademark of Special Metals Corporation. Therefore, for legal purposes, most alloy suppliers refer to it as Alloy 625 instead of Inconel 625.

Is Inconel the same as Alloy 625?Is Inconel the same as Alloy 625?

Composition
The first major difference between Inconel Alloy 625 and 718 is their chemical composition. Both are nickel alloys, but each contains varying amounts of various chemicals that make them unique.

Alloy 625 is primarily nickel-based, while Alloy 718 is based on Nickel + Cobalt (Ni+Co). The use of Nickel + Cobalt in Alloy 718 means that it has greater hardness and strength. Alloy 625, on the other hand, has higher levels of Chromium and Molybdenum, making it more corrosion resistant. See below for a full comparison of Inconel 625 vs 718 chemical compositions.

Inconel 625 Applications

Inconel 625 is most commonly used in the oil and gas industry due to its excellent corrosion resistance. This makes it the alloy of choice for subsea equipment. It is also used in corrosive environments in the aerospace industry, such as exhaust systems, furnace muffles and engine thrust-reversers.

Inconel 718 Applications

Inconel 718 is a pillar of the aerospace industry. Its exceptional heat resistance makes it ideal for application in high-temperature environments, including engine components. It is also used in high-performance car engines in the motorsport industry.

Product Forms

Both alloy 625 and 718 are easily formable and weldable, so they are readily available in a range of product forms.

Inconel 625 Product Forms

Pipe

Coil

Welding Wire

Sheet and Plate

Round Bar

Pipe Fittings

Flanges

Inconel 718 Product Forms

Round Bar

Sheet and Plate

Welding Wire

Send Inquiry

whatsapp

Phone

E-mail

Inquiry