Mar 11, 2025 Leave a message

astm-b444-(1)-(1).pdf

Inconel 625 / Nickel Alloy 625 / UNS N06625 Pipe And Tube

Inconel 625 / Nickel Alloy 625 / UNS N06625 Pipe and Tube

 

 

Nickel alloy 625 is nickel-chromium-molybdenum-columbium alloy material, major content Nickel minimum 58%, also called Inconel 625 or UNS NO6625 under standard ASTM B444 for pipes, or ASTM B443 for plates coils. Other chemical content Chromimum 20% to 23%, Columbium + tantalum 3.15% to 4.15%, Molybdenum 8.0% to 10.0%, columbium Cobalt allow 1.0% max if determined, Iron 5.0% max.

Density of 8.4 g/cm3, melting point of 1290-1350 °C. It has excellent corrosion resistance to inorganic acids, and has excellent corrosion resistance to various corrosive media in oxidative and reducing environments.

Inconel 625 / Nickel Alloy 625 / UNS N06625 Pipe and TubeInconel 625 / Nickel Alloy 625 / UNS N06625 Pipe and Tube

 

Inconel 625 Alloy / Inconel 625 / UNS N06625 Features
Inconel 625 alloy is a non-magnetic, corrosion and oxidation resistant nickel-chromium based solid solution hardened wrought high temperature alloy.

Solid solution hardened nickel based wrought high temperature alloy with molybdenum and niobium as the major strengthening elements. The high strength of Inconel 625 is attributed to the hardening combination of molybdenum and niobium in the nickel-chromium matrix of the alloy. The addition of molybdenum works with niobium to harden the alloy matrix, providing high strength without the need for intensive heat treatment.

Inconel 625 is extremely resistant to a wide range of extremely severe corrosive environments, including corrosion, high temperature effects such as oxidation and carburization. Due to the solid solution of refractory Co and Mo in the nickel-chromium matrix, 625 has excellent strength and toughness at elevated temperatures from cryogenic to 2000°F (1093°C).

Inconel 625 Composite Pipe Liner/Nickel Alloy 625 Weld Overlay
Inconel 625 material can be clad or lined on high strength carbon steel pipes such as API 5L X60, X65, X70, which includes outer parent pipe carbon steel to provide strength, and inner material clad or lined Inconel 625 to provide high corrosion resistance in various environments including marine, airspace, chemical plants and petrochemical industries.

Cladding or lining the inside of carbon steel pipe with Inconel alloy 625 material has been a popular choice to solve corrosion problems and save a lot of cost.

Inconel 625 Advantages
High tensile strength and high corrosion fatigue performance;
High oxidation resistance at high temperatures up to 1050C.
Good processing and welding performance;
Excellent corrosion resistance and oxidation resistance;
Resistant to stress corrosion in salt spray atmosphere;
Excellent resistance to pitting, crevice corrosion and intergranular corrosion;
Excellent mechanical properties at both very low and very high temperatures;
Almost completely unaffected by stress corrosion cracking caused by chlorides;
Good corrosion resistance to acids such as nitric acid, phosphoric acid, sulfuric acid and hydrochloric acid, as well as alkalis, and can manufacture thin structural parts with high heat transfer.

Nickel alloy 625 / Inconel 625 / UNS N06625 has very low corrosion rates in both marine and non-marine environments, good seawater corrosion resistance, corrosion resistance to various salt solutions, good corrosion resistance to HNO3 phosphoric acid, and considerable corrosion resistance to HCl and low-concentration sulfuric acid heated below the boiling point. The aging hardening phenomenon produced by the alloy after long-term use at 550-700℃ will cause the plasticity of N06625/No6625 alloy to decrease. and stress corrosion cracking resistance to chloride ions – making it an excellent choice for seawater and aerospace applications.

Send Inquiry

whatsapp

Phone

E-mail

Inquiry