Oct 17, 2025 Leave a message

Incoloy ASTM B407 800H Solid Hot-Worked Tube

 
Incoloy ASTM B407 800H Solid Hot-Worked Tube
Incoloy ASTM B407 800H Solid Hot-Worked Tube
01

Incoloy ASTM B407 800H Solid Hot-Worked Tube

Incoloy ASTM B407 800H is a seamless nickel-iron-chromium alloy tube known for its high-temperature strength, creep resistance, and excellent resistance to oxidation, carburization, and corrosion. It is suitable for demanding environments such as chemical processing, power generation, and oil and gas refining. Key considerations include its processability (which requires specific temperature guidelines) and mechanical properties, which, due to specialized heat treatment and compositional control, are superior to base alloy 800 at elevated temperatures.

02

What is the heat treatment process for Inconel alloy 800?

The chemical composition of Inconel alloy 800HT is within the limits of alloy 800H and requires a heat treatment temperature of at least 2100°F (1149°C). Its carbon content is 0.06% to 0.10% (compared to 0.05% to 0.10% for alloy 800H), and its aluminum and titanium content is 0.85% to 1.20% (compared to 0.30% to 1.20% for alloy 800H).

Inconel Alloy 800
 
 

ASTM B407 UNS N08810 Seamless Pipes Equivalent Grades

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN OR
Incoloy 800H 1.4958 N08810 NCF 800H NA 15(H) ЭИ670 Z8NC33-21 X5NiCrAlTi31-20 XH32T

 

Incoloy 800H Pipe Chemical Composition

Grade C Mn Si S Cu Fe Ni Cr Al Ti
800H 0.05 – 0.10 1.50 max 1.00 max 0.015 max 0.75 max 39.50 min 30.00 – 35.00 19.00 – 23.00 0.15 – 0.60 0.15 – 0.60

 

Check Working Pressure of JIS NCF 800H Hot Finished Seamless Pipes

Pipe Outer Diameter
(in.)
Wall Thickness of Pipe (inches)
.028 .035 .049 .065 .083 .095 .109 .120
Working Pressure (psig)
1/2   2300 3200 4400        
1/2   2300 3200 4400        
1/4 3700 4800 7000 9500        
1/8 7900 10100            
1       2200 2900 3400 3900 4300
3/4     2200 3000 4000 4600    
3/8   3100 4400 6100        
5/16   3700 5400 7300        

 

Mechanical Properties of ASTM B407 UNS N08810 Seamless Pipes

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Incoloy 800H 7.94 g/cm3 1385 °C (2525 °F) Psi – 75,000 , MPa – 520 Psi – 30,000 , MPa – 205 30 %

 

Fabrication and Processing
Hot Working: Optimum temperatures are 1600°F to 2200°F (871°C to 1204°C), with heavy forming ideal at 1850°F (1010°C).
Avoid: Forming temperatures between 1200°F and 1600°F (649°C to 871°C).
Cooling: Rapid cooling after hot working is recommended to minimize cooling time within the 1000°F to 1400°F (538°C to 760°C) range.
Cold Working: Applicable only to annealed material; stress relieving or annealing may be required depending on the amount of strain.
Stress Relieving: Can be performed at temperatures between 1000°F and 1600°F (538°C to 871°C). Annealing: Recrystallization annealing is typically conducted at 2100°F-2200°F (1149°C-1204°C). 

 

Available Shapes and Sizes
Shapes: Straight, round, and square tubes.
Sizes: Available in a wide range of sizes, with outer diameters ranging from 6.35 mm to 152 mm.

Gnee Steel

 

About Gnee Steel

Gnee Steel specializes in the production and sale of various nickel-based alloys, including Nickel 201, Nickel 202, Hastelloy C-276, Hastelloy C-22, Hastelloy B, Hastelloy C-4, Inconel Alloy 600, Inconel 625, Inconel 718, Inconel X-750, Incoloy Alloy 800, Incoloy 800H/HT, Incoloy 825, Monel Alloy 400, Monel K500, and high-temperature alloys. Gnee Steel's products are widely used in aerospace, chemical, electric power, automotive, and nuclear energy applications, and we can provide customized alloy solutions tailored to customer needs. For alloy pricing inquiries or customized alloy solutions, please contact us for a quote at ss@gneemetal.com.

Send Inquiry

whatsapp

Phone

E-mail

Inquiry