
ASME SB163 Inconel 601 alloy steel seamless condenser tube
ASME SB163 Inconel 601 is a seamless nickel-based alloy tube used in high-temperature condensers and heat exchangers, renowned for its excellent oxidation resistance up to 1000°C and good high-temperature strength. Key properties include resistance to thermal cycling and spalling, good resistance to aqueous corrosion, and, despite its higher cost, suitability for a variety of high-stress environments. This standard specifies nickel and nickel alloy seamless tubes for use in these demanding applications.
What is the difference between Inconel 600 and Inconel 601?
Inconel 600 and Inconel 601 are both very common high-temperature alloys. Both alloys offer excellent high-temperature performance. Inconel 601, however, has a higher chromium content than Inconel 600. Therefore, their primary difference lies in their oxidation resistance.

ASME SB163 covers nickel and nickel alloy seamless tubing for condensers and heat exchangers. This standard covers outside diameter and average wall thickness, or outside diameter and minimum wall thickness. Tubing shall be of the alloys and conditions specified in this specification. The material shall conform to the specified compositional limits for nickel, copper, molybdenum, iron, manganese, carbon, silicon, chromium, aluminum, titanium, phosphorus, cerium, zirconium, yttrium, boron, cobalt, niobium, tungsten, and nitrogen. The material's tensile strength, yield strength, elongation, and Rockwell hardness shall meet the mechanical property requirements of this specification. Test methods such as chemical analysis, tensile strength, rounding procedure, Rockwell hardness, grain size, and hardness conversion shall be performed.
Inconel 601 Corrosion Resistance: One of the key properties of 601 is its ability to withstand high temperatures, even under the most severe conditions. During heating and cooling cycles, 601 steel forms a dense oxide scale that resists spalling. 601 steel also exhibits good resistance to carburization. Due to its high chromium and aluminum content, it exhibits excellent oxidation resistance in high-temperature, sulfur-containing atmospheres.
Inconel 601 Pipe Specifications
Pipe Specifications: ASTM B163, B516 / ASME SB163, SB516
Sizes: 1/8" NB to 30" NB
Thickness Range: 0.3mm - 50mm
Specifications: SCH20, SCH30, SCH40, STD, SCH80, XS, SCH60, SCH80, SCH120, SCH140, SCH160, XXS
Types: Seamless, Welded, Electric Resistance Welded, Fabricated, CDW
Shapes: Round, Square, Rectangular
Lengths: Single Random Length, Double Random Length, and Cut-to-Length. Ends: Plain, Bevel, Threaded
End Protection: Plastic Cap
External Finish: 2B, No. 1, No. 4, No. 8 Mirror
Surface Finish: Annealing and Pickling, Polishing, Bright Annealing, Cold Drawing
External Coating: 3LPE / 3LPP / FBE / DFBE / PP
Inconel 601 Nickel Alloy Seamless Tubes Tubing Pipes Chemical Composition
| Alloy | % | Ni | Cr | Fe | C | Mn | Si | Cu | Al | P | S |
| ASTM B163 N06601 | Min. | 58 | 21 | 1 | |||||||
| ASTM B163 N06601 | Max. | 63 | 25 | balance | 0.1 | 1 | 0.5 | 1 | 1.7 | 0.02 | 0.015 |
| Alloy | % | Ni | Cr | Fe | C | Mn | Si | Cu | Al | P | S |
| ASTM B167 N06601 | Min. | 58 | 21 | 1 | |||||||
| ASTM B167 N06601 | Max. | 63 | 25 | balance | 0.1 | 1.5 | 0.5 | 1 | 1.7 | 0.02 | 0.015 |
Inconel 601 Nickel Alloy Seamless Tubes Tubing Pipes Mechanical Properties
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Inconel 601 | 8.1 g/cm3 | 1411 °C (2571 °F) | Psi – 80,000 , MPa – 550 | Psi – 30,000 , MPa – 205 | 30% |
Inconel 601 Nickel Alloy Seamless Pipe Features
High-Temperature Resistance: One of the key advantages of Inconel 601 is its exceptional high-temperature resistance. It can withstand temperatures up to 1200°C (2200°F), making it ideal for use in extreme high-temperature environments, such as furnace components and heat exchangers.
Oxidation and Corrosion Resistance: Inconel 601 exhibits excellent oxidation resistance, even in environments containing sulfur compounds and high temperatures. Its high chromium content effectively protects against corrosive gases, reducing the risk of pipe degradation and extending pipe service life.
Excellent Mechanical Properties: The combination of nickel, chromium, and iron in Inconel 601 enhances its mechanical properties, resulting in excellent tensile strength, yield strength, and toughness. This makes the seamless pipe resistant to deformation, making it suitable for demanding applications.
Suitable for a variety of environments: Inconel 601 seamless pipe can withstand a wide range of corrosive environments, including sulfuric acid, hydrochloric acid, nitric acid, and alkaline solutions. This versatility makes it suitable for a variety of industries, including chemical processing, power generation, and oil and gas.
Excellent Formability: Inconel 601 has good formability and weldability, making it easier to fabricate and install. This makes it possible to produce custom-shaped pipes and fittings to ensure they precisely fit the specific application.

Gnee Steel specializes in the production of various nickel-based alloys. Gnee Steel's product packaging includes steel strapping: Pipes with an outer diameter of 3 inches or less are typically strapped together with polypropylene film to prevent rust during sea transportation, and then secured with steel strapping. Wooden boxes/crates: Pipes are typically packaged in wooden boxes or crates to protect them during transportation, especially those that are longer or have larger diameters. Seaworthy export packaging: Suppliers typically use standard seaworthy export packaging methods, which may include a variety of materials and techniques to protect the pipes during transportation. Tarpaulin packaging: This prevents rainwater, seawater, and other external factors from penetrating the export wooden crates during transportation. Gnee Steel specializes in the production and sale of alloy materials. Gnee Steel's products are widely used in aerospace, chemical, power, automotive, nuclear, and other industries, and we can provide customized alloy material solutions based on customer needs. For alloy material pricing inquiries or customized alloy material solutions, please feel free to contact us for a quote at ss@gneemetal.com





