Inconel 625 Forgings
Forging Types: Forged shafts, forged rings, forged bars, forged discs, forged billets, forged blocks, forged flanges
Specifications & Cutting Service: Custom dimensions available, precision cutting service supported
Applicable Standards: ASTM B564, AMS 5666
Core Properties: Excellent resistance to corrosion, oxidation and high-temperature creep
Testing & Certification: UT, PT NDT inspection, 3.1 / 3.2 material test certificates provided
As a leading supplier and manufacturer in China, GNEE Steel provides cost-effective nickel-based alloy products.
- Send E-mail: ss@gneesteel.com
- Tel: +8615824687445
Inconel 625 Forgings - Specification Overview
Inconel 625 forging is a Ni-Cr-Mo-Nb solid-solution strengthened hot-worked product manufactured to the forging-specific ASTM/ASME specification listed in the standards table below. With UNS designation N06625, the material is produced by VIM + ESR/VAR melting, cogging and upsetting, open- or closed-die forging or ring rolling with controlled grain flow, followed by heat treatment and machining. Forging form changes the acceptance logic relative to bar: grain flow, transverse / tangential tensile properties, macrostructure, grain size and 100% volumetric ultrasonic soundness become the controlling tests. Every forging is delivered with an EN 10204 3.1 mill test certificate recording heat number, actual chemistry, mechanical results in the specified orientation and the full forging heat-treatment record.

Inconel 625 Forgings International Grade Equivalents
Cross-reference is for identification only. Equivalent grades are nominally similar, not automatically interchangeable: chemical limits, impurity control, heat treatment and acceptance testing differ between national standards. Always confirm by UNS number and product-form standard.
| Designation system | Equivalent grade |
|---|---|
| DIN W.Nr. | 2.4856 |
| EN | NiCr22Mo9Nb |
| GB | GH3625 / NS3306 (old NS336) |
| JIS | NCF 625 |
| GOST | ХН75МБТЮ |
Inconel 625 Forgings Applicable Standards
ASTM/ASME specifications are product-form specific: the bar, plate, tube, strip, forging and filler-metal standards for the same UNS designation carry different test and acceptance requirements. State the governing product-form standard and edition on the purchase order.
| Region / system | Specification |
|---|---|
| Grade-specific governing standard | ASTM B564 / ASME SB-564 (forgings) |
| United States (forgings) | ASTM B564 / ASME SB-564 for corrosion-resistant nickel alloy forgings; ASTM B637 / ASME SB-637 for precipitation-hardening and high-temperature alloy forgings |
| Related forging specifications | ASTM B462 and ASTM A182 / ASME SA-182 where the alloy and construction code require them |
| Aerospace (AMS) | AMS 5662 / AMS 5666 and the grade-specific AMS forging specification listed in the standards table |
| China | GB/T 14992 (GH series) / GB/T 15007 (NS series) chemistry; forging product standard per the order |
| Europe | EN 10222-5 / EN 10095 basis; EN 10204 3.1 certificate governs the delivered heat |
| Testing standards | ASTM E8 tensile (including transverse / tangential tests), hardness, grain size, macrostructure, ultrasonic examination, PMI |
| Other product forms of this grade | ASME SB-446; ASTM B443 plate; B444 tube; B564 forgings; DIN 17752; EN 10095; GB/T 14999 |
Inconel 625 Forgings Chemical Composition (wt%)
Published specification limits for the base alloy, N06625. Single figures are maximum values unless a range or min is shown. The certified heat analysis on the EN 10204 3.1 MTC governs; the Forgings product standard invokes its own check-analysis and acceptance requirements.
| Element / item | Limit (wt%) |
|---|---|
| Ni | 58.0 min |
| Cr | 20.0-23.0 |
| Mo | 8.0-10.0 |
| Nb+Ta | 3.15-4.15 |
| Fe | 5.0 max |
| Co | 1.0 max |
| C | 0.10 max |
| Mn | 0.50 max |
| Si | 0.50 max |
| Al | 0.40 max |
| Ti | 0.40 max |
Data basis: the published ASTM / ASME / AMS / EN / DIN / GB / JIS documents listed above and recognised producer data sheets. Refer to the current edition of the governing standard for the complete table including residual and impurity elements.

Inconel 625 Forgings Mechanical and Physical Properties
Values quoted are published specification minima or typical solution-annealed data for the base alloy. The delivered forging is accepted to its own product-form standard; properties vary with section size, cold work, test orientation and temperature, and the certified results on the MTC govern.
| Property | Value |
|---|---|
| Tensile strength, Rm | 827 MPa min (Grade 1) |
| Yield strength, Rp0.2 | 414 MPa min (Grade 1) |
| Elongation, A | 30% min |
| Density | 8.44 g/cm3 |
| Melting range | 1290-1350 C |
| Temperature capability | 980 C oxidation limit / 650 C loaded |
Inconel 625 Forgings Forgings Sizes, Tolerances and Supply Condition
The following capabilities apply specifically to the forging form of Inconel 625; other product forms are covered by their own standards and dimensional schedules. Values reproduce the capability already published on the Forgings hub page and are confirmed against the drawing or order specification before release.
| Parameter | Forgings capability |
|---|---|
| Forging types | Open-die and closed-die forgings, rolled rings, discs, hubs, flanges, blocks, shafts and step shafts, upset forgings |
| Ring / disc capability | OD up to 2,500 mm; height up to 600 mm |
| Forged bar | Diameter up to 800 mm; longer step shafts by agreement |
| Weight range | From small precision forgings to multi-tonne open-die pieces; quoted per drawing |
| Manufacturing route | VIM + ESR/VAR melting → cogging / upsetting → open or closed die forging or ring rolling with controlled grain flow → heat treatment → rough / finish machining |
| Dimensional tolerance | Per drawing and the governing forging specification; machining allowance stated on the forging drawing |
| Delivery condition | Solution annealed, annealed, aged / precipitation-hardened, or as-forged; rough-machined or finish-machined on request |
| Inspection | Chemical analysis, ASTM E8 tensile in the required orientation, hardness, grain size, macro / microstructure, 100% ultrasonic examination, liquid penetrant where specified, dimensional check, PMI |
| Documentation | EN 10204 3.1 MTC (3.2 on request), forging heat-treatment chart with furnace records, UT report, NACE MR0175 / ISO 15156 statement when specified |








Manufacturing Process of Inconel 625 (UNS N06625) Forgings
- Raw Material Verification & Billet Preparation Qualified Inconel 625 ingots or billets produced by VIM + ESR melting route are adopted. We verify chemical composition and heat traceability. Cut to required size, grind and clean surface to remove scale, cracks and inclusions, and mark each batch uniquely.
- Controlled Heating Heating is carried out in atmosphere-controlled furnaces. The forging temperature window is strictly controlled: initial forging temperature 1100–1180°C, finishing forging temperature ≥980°C. Soaking time is calculated based on section thickness to ensure uniform temperature distribution, prevent overheating or incipient melting and reduce deformation resistance.
- Hot Forging Forming Open-die forging, closed-die forging or seamless ring rolling is selected according to component geometry. Deformation is completed in multiple passes; reduction per pass is 10–20%, with total forging ratio ≥3:1. Hydraulic forging press is applied to break down cast dendritic structure, close internal porosity, form continuous grain flow and refine grain structure, avoiding duplex grain. Open-die forging is suitable for forged bars, forged shafts and forged blocks. Ring rolling is used for forged rings and flanges. Closed-die forging delivers near-net shape for precision parts.
- Solution Annealing Heat Treatment (Key Step) Solution annealing is performed after forging: heat to 1090–1150°C, hold 1 hour per 25 mm of section thickness, followed by rapid water quenching or forced air cooling. This fully dissolves detrimental precipitates such as Laves phase and delta phase, delivers homogeneous single-phase austenite matrix, and balances corrosion resistance, ductility and toughness. Stress relief annealing is available upon special requirements.
- Machining & Finishing Rough machining, finish turning, drilling and other CNC operations are performed per drawing requirements to meet dimensional tolerances and surface roughness. Remove flash, burrs and oxide scale, surface polishing is optional.
- NDT & Mechanical Testing Each batch undergoes ultrasonic testing (UT), penetrant testing (PT) or magnetic particle testing. Test coupons are taken for tensile test, hardness check and metallographic examination to verify mechanical properties and grain size. Material certificates complying with ASTM B564, AMS 5666 and other specifications are issued with full traceability.
- Cleaning, Marking & Packing Degreasing and cleaning, stamp heat number, alloy grade and dimensions on parts. Anti-rust packaging, delivered together with test reports and material certifications.






Inconel 625 Forgings Heat Treatment
Inconel 625 forgings use solution annealing as their core heat treatment process to dissolve intermetallic precipitates and achieve a uniform microstructure, ensuring stable corrosion resistance and ductility. The standard solution annealing temperature range is 1090–1200°C, followed by rapid air cooling or water quenching. Hot-worked Inconel 625 forgings can be supplied in the as-forged or annealed condition according to project requirements.
Forgings that undergo heavy stock machining can receive an additional stress-relief treatment at 870–955°C to relieve residual stresses without causing significant strength degradation. Inconel 625 does not rely on age hardening; its properties derive from solid-solution strengthening by molybdenum and niobium, eliminating the need for an aging step. Temperature charts are recorded throughout the entire heat treatment process, followed by hardness and PMI re-inspections after heat treatment to meet standard requirements.
| Heat Treatment Type | Temperature Range | Cooling Method | Application Notes |
|---|---|---|---|
| Solution Annealing | 1090–1200 °C | Rapid air quench / Water quench | Standard condition for most corrosion & high-temperature service forgings |
| Stress Relieving | 870–955 °C | Slow air cool | For heavily machined forgings to remove machining residual stress |
| As-Hot-Finished | N/A | As forged cooling | Available upon request, limited for non-critical applications |
Characteristics of Inconel 625 forging
- Niobium-molybdenum solid-solution strengthening without precipitation heat treatment
- outstanding pitting and crevice corrosion resistance in seawater
- high fatigue strength in the as-rolled condition
- excellent weldability with no post-weld heat treatment required
In forged form these characteristics translate into component integrity: the Ni-Cr-Mo-Nb solid-solution strengthened chemistry sets hot-workability, forge-temperature window and response to solution annealing or ageing, while the forging reduction and grain-flow pattern govern anisotropic strength and fatigue life. Test pieces are taken in the orientation required by the governing forging specification, and the whole volume is ultrasonically examined before machining.
Inconel 625 Forgings Applications
- Marine risers and subsea manifolds
- downhole and wellhead components
- flue gas desulphurisation hardware
- chemical process piping supports
- aerospace ducting and exhaust clamps
- heat-exchanger tube-sheet blanks
- Rotating discs, hubs, shafts and compressor / turbine hardware
- Pressure-containing flanges, rings and valve bodies to ASME SB-564 / SB-637
- Large rings and upset forgings for aerospace and power-generation assemblies
Typical service envelope: 980 C oxidation limit / 650 C loaded. Final material selection should be confirmed against the actual medium, concentration, pressure, stress level and applicable design code.
Nickel-Alloy Forgings: Inconel 600/601/625, Monel 400/K500, Hastelloy C276/C22, Incoloy 800/800H/800HT→ASTM B564
Inconel 625 Forgings Size Specification Table
Inconel 625 Forging Billets
| Item | Parameter |
|---|---|
| Grade | Inconel 625 (UNS N06625) |
| Type | Forging Billets |
| Diameter | Φ50mm – Φ600mm |
| Length | 100mm – 3000mm |
| Standard | ASTM B564, AMS 5666 |
| Service | Precision cutting, custom size |
Inconel 625 Forging Shaft
| Item | Parameter |
|---|---|
| Grade | Inconel 625 (UNS N06625) |
| Type | Forging Shaft |
| Diameter | Φ40mm – Φ550mm |
| Length | 150mm – 4000mm |
| Standard | ASTM B564, AMS 5666 |
| Service | Turning, cutting, custom drawing |
Inconel 625 Forged Bar
| Item | Parameter |
|---|---|
| Grade | Inconel 625 (UNS N06625) |
| Type | Forged Bar |
| Diameter | Φ30mm – Φ500mm |
| Length | 100mm – 3500mm |
| Standard | ASTM B564, AMS 5666 |
| Service | Saw cutting, short cut |
Inconel 625 Forged Ring
| Item | Parameter |
|---|---|
| Grade | Inconel 625 (UNS N06625) |
| Type | Forged Ring |
| OD | Φ150mm – Φ2500mm |
| ID | Φ80mm – Φ2200mm |
| Height | 20mm – 400mm |
| Standard | ASTM B564, AMS 5666 |
| Service | Boring, turning, custom drawing |
Inconel 625 Forged Round Disc
| Item | Parameter |
|---|---|
| Grade | Inconel 625 (UNS N06625) |
| Type | Forged Round Disc |
| Diameter | Φ100mm – Φ1200mm |
| Thickness | 15mm – 300mm |
| Standard | ASTM B564, AMS 5666 |
| Service | Cutting, facing, custom thickness |
Inconel 625 Forging Stock
| Item | Parameter |
|---|---|
| Grade | Inconel 625 (UNS N06625) |
| Type | Forging Stock |
| Section | Round / Square |
| Size | 50mm – 500mm |
| Length | 100–2500mm |
| Standard | ASTM B564, AMS 5666 |
| Service | Cut to blank for secondary forging |
Inconel 625 Forged Discs & Circles
| Item | Parameter |
|---|---|
| Grade | Inconel 625 (UNS N06625) |
| Type | Forged Discs & Circles |
| OD | Φ80mm – Φ1000mm |
| Thickness | 10mm – 200mm |
| Standard | ASTM B564, AMS 5666 |
| Service | Plasma cutting, surface grinding |
Inconel 625 Forging Blocks
| Item | Parameter |
|---|---|
| Grade | Inconel 625 (UNS N06625) |
| Type | Forging Blocks |
| Width × Height | 50mm – 600mm |
| Length | 100mm – 2000mm |
| Standard | ASTM B564, AMS 5666 |
| Service | Saw cutting, milling, custom block |
Inconel 625 Blind Flanges
| Item | Parameter |
|---|---|
| Grade | Inconel 625 (UNS N06625) |
| Type | Blind Flanges |
| Size | 1/2" – 24" |
| Class | Class150 ~ Class2500 |
| Standard | ASTM B564, ASME B16.5 |
| Service | Drilling, facing, custom drawing |
Inconel 625 Forging Weld Neck
| Item | Parameter |
|---|---|
| Grade | Inconel 625 (UNS N06625) |
| Type | Weld Neck Flange Forging |
| Size | 1/2" – 24" |
| Class | Class150 ~ Class2500 |
| Standard | ASTM B564, ASME B16.5 |
| Service | CNC machining, RTJ groove optional |
Packaging and Shipping


FAQ:
Which standard covers Inconel 625 forgings?
Forgings in Inconel 625 (UNS N06625) are ordered to the forging-specific ASTM/ASME specification shown in the standards table above - commonly ASTM B564 / ASME SB-564 for corrosion-resistant alloys and ASTM B637 / ASME SB-637 for age-hardened high-temperature alloys - not to the bar, plate or tube standard. State the UNS designation, forging class, drawing, test orientation and delivery condition on the purchase order.
What forging sizes and shapes can GNEE supply in Inconel 625?
Open-die and closed-die forgings, rolled rings, discs, hubs, flanges, blocks and step shafts; rings / discs up to 2,500 mm OD and 600 mm height, forged bar up to 800 mm diameter. Rough or finish machining, controlled grain flow and customer-specific forging drawings are supported.
How is a Inconel 625 forging inspected and certified?
Each forging receives chemical analysis, ASTM E8 tensile testing in the orientation required by the specification, hardness, grain-size and macrostructure examination, 100% ultrasonic examination, liquid penetrant when specified, dimensional checking and PMI. The EN 10204 3.1 MTC is accompanied by the forging heat-treatment chart, UT report and, when required, EN 10204 3.2 third-party endorsement.
What is the chemical composition of Inconel 625 forging?
The governing limits are: Ni 58.0 min; Cr 20.0-23.0; Mo 8.0-10.0; Nb+Ta 3.15-4.15; Fe 5.0 max; Co 1.0 max. The full table on this page is taken from the published specification for the base alloy and is verified on the EN 10204 3.1 certificate. Composition is the controlling identifier; a trade name alone is not a complete purchase specification. Published specification limits for the base alloy, N06625. Single figures are maximum values unless a range or min is shown. The certified heat analysis on the EN 10204 3.1 MTC governs; the Forgings product standard invokes its own check-analysis and acceptance requirements.
What heat treatment applies to Inconel 625 forging?
Solution anneal 1090-1200 C then rapid air or water quench; hot-worked bars may be supplied annealed or as-hot-finished. Hangbo records the actual furnace cycle on the certificate; any re-heat-treatment after machining or forming must follow the same qualified cycle and the governing product standard.
What mechanical properties does Inconel 625 achieve in forging form?
Base-metal specification values for the quoted condition are: tensile 827 MPa min (Grade 1), yield 414 MPa min (Grade 1), elongation 30% min. These are the values published for the base alloy; the delivered forging is accepted to its own product standard, and the certified test results on the MTC govern rather than a data sheet assumption.
Where is Inconel 625 forging typically used?
Marine risers and subsea manifolds; downhole and wellhead components; flue gas desulphurisation hardware. Final selection should be confirmed against the actual medium, temperature, stress level and applicable design code; our engineers can review the service condition before quotation.
Hot Tags: inconel 625 forgings, China inconel 625 forgings suppliers
Previous
Inconel 718 ForgingsYou Might Also Like
Send Inquiry














