Nickel Alloy Forgings

 
Nickel 200 Alloy Forgings | Nickel UNS N02200 Forgings
 
 

GNEE Nickel Alloy Forgings Supplier

GNEE manufactures a full portfolio of nickel alloy forged products, including forged bars, forged rings, forged round discs, forged billets, forging blocks and nickel alloy flanges. We cover mainstream grades: Inconel, Hastelloy, Monel, Incoloy and pure nickel.

 

Our workshop is equipped with VIM / VAR / ESR vacuum melting furnaces, hydraulic forging presses, ring rolling mills, controlled-atmosphere heat treatment furnaces, CNC machining centers and complete NDT inspection units.

 

We supply 3.1 MTC, 3.2 third-party inspection certificates, PMI, UT, MT, PT test reports, fully compliant with ASTM, AMS, ASME and API standards. We offer one-stop services including forging, custom heat treatment, rough & finish machining, drawing-based customization and full material traceability.

 

We are a reliable nickel alloy forging supplier for oil & gas, chemical processing, aerospace, power generation and marine industries. Our stable forging process controls grain flow, minimizes internal defects and delivers consistent performance for critical high-temperature and corrosion-resistant components. Send your drawing for technical review and quotation.

 

 

 

Nickel Alloy Grades for Forgings 

 All forgings are produced from certified ingot or billet with complete melt traceability. Mechanical values below are minimum requirements at room temperature under the applicable ASTM specification - higher strength levels are achieved after solution annealing and ageing, depending on grade.

 

Grade UNS No. Alloy Type Key Characteristics & Typical Service Min. Tensile
(MPa)
Min. Elong.
(%)
Standard
Inconel 625 N06625 Ni-Cr-Mo-Nb Niobium-stabilised, high strength and toughness from cryogenic to elevated temperature; excellent fatigue and oxidation resistance. 827 (Grade 1) 30 ASTM B564 / B462
Inconel 718 N07718 Precipitation-hardening Ni-Fe-Cr Gamma-double-prime hardened; high strength to 650°C, good creep and stress-rupture properties. Solution annealed + aged. 1,240 (aged) 10 ASTM B637 / AMS 5662
Inconel 600 N06600 Ni-Cr-Fe Resistance to oxidation and carburisation at high temperature; good chloride stress corrosion resistance. 550 30 ASTM B564 / B462
Hastelloy C-276 N10276 Low-carbon Ni-Mo-Cr Outstanding resistance to strong oxidising and reducing acids, wet chlorine and pitting in chloride media. 690 40 ASTM B564 / B462
Hastelloy C-22 N06022 Ni-Cr-Mo-W Versatile corrosion resistance with improved thermal stability; resists pitting, crevice and stress corrosion cracking. 690 45 ASTM B564 / B462
Hastelloy B-3 N10675 Ni-Mo Reducing-acid service; excellent resistance to hydrochloric and sulfuric acid with improved fabricability over B-2. 760 40 ASTM B564 / B462
Hastelloy X N06002 Ni-Cr-Fe-Mo High-temperature forging alloy for combustion zones and furnace hardware; good oxidation resistance and formability. 690 35 ASTM B564 / AMS 5754
Monel 400 N04400 Ni-Cu Resistance to seawater, hydrofluoric acid and alkalis; widely used for marine and chemical plant components. 480 35 ASTM B564 / B462
Monel K-500 N05500 Age-hardenable Ni-Cu-Al Higher strength and hardness than Monel 400 with the same corrosion resistance; used for pump and propeller shafts. 965 (aged) 20 ASTM B564 / B865

 

Supply condition: solution-annealed or solution-annealed + aged, with EN 10204 3.1 mill test certificate as standard. Other grades - Incoloy 800 / 800H / 800HT / 825, Inconel X-750, Nickel 200 / 201 - are forged on request; contact us for mechanical values and availability.

 

What Are Nickel Alloy Forgings?

 

 

Nickel alloy forgings are structural components formed via hot working under controlled pressure and temperature using vacuum-melted nickel-based billets as raw materials. The forging process aligns the grain structure along the direction of stress flow, directly enhancing tensile strength, fatigue resistance, and resistance to stress corrosion cracking.

 

The vast majority of nickel alloy forgings are produced from high-quality VIM, VAR, or ESR vacuum remelted ingots, as high-temperature superalloys are extremely sensitive to impurities and grain coarsening. Nickel alloy forgings encompass multiple alloy systems: precipitation-hardened superalloys, solid-solution strengthened nickel alloys, copper-nickel alloys, and commercially pure nickel grades. When ordinary stainless steels, carbon steels, and low-alloy steels are unable to withstand high temperatures or highly corrosive environments for extended periods, nickel alloy forgings are typically selected.

 

GNEE Nickel Alloy Forging Products
 

We forge the following product forms across the full range of nickel alloys. Standard items are available from stock or short lead time; custom shapes and sizes are forged to your drawings.

Nickel Alloy Forged Bar

Open-die and closed-die forged bar in round, square and flat sections, produced in Inconel 718, Inconel 625, Monel 400/K500, Hastelloy C276 and more. Forged bar offers denser, defect-free microstructure than rolled or cast bar, making it the preferred stock for machining into high-integrity components.

Forged Nickel
Nickel Based Alloys Forging

Nickel Alloy Forged Rings (Seamless Rolled Rings)

Seamless forged rings and rolled rings manufactured by ring-rolling or open-die forging, with uniform grain flow in both axial and radial directions. Supplied in solution-annealed or aged condition for flange blanks, pressure vessel components, bearing races and gas turbine parts.

Nickel Alloy Forged Flanges

Full range of forged flanges: weld neck, slip-on, blind, socket weld, lap joint and threaded, in Class 150 to 2500 ratings per ASME B16.5 and ASME B16.47. Forged from corrosion-resistant nickel alloy per ASTM B564 and ASTM B462, with EN 10204 3.1 certification for every shipment.

Nickel Alloy Forgings
INCONEL alloy 601

Nickel Alloy Forged Discs & Disks

Forged discs (also spelled forged disk) in flat, round sections machined or supplied as-forged. Used as tube sheets, blind flange blanks, valve plates, centrifuge components and machined feedstock. Uniform forging quality through the full thickness, ultrasonically tested on request.

Nickel Alloy Forged Blocks

Heavy forged blocks and blobs in nickel alloys, produced by open-die forging and supplied as-forged, rough-machined or fully machined. A reliable starting point for dies, valve bodies, press tooling and machined structural parts where cast material is not acceptable.

Inconel 601® | Nickel Alloy 601 | UNS N06601
Inconel Alloy 600 V S Inconel Alloy 601

Nickel Alloy Forging Shaft

Beyond standard forms, GNEE forges custom shapes from your drawings: stepped shafts, cone sections, nozzles, hubs, couplings and machined finished parts. Send us your drawing and specification, and our engineers will advise on forging process, heat treatment and testing.

 

Key Forging Grade Compositions

 

 

Grade Ni Cr Mo Fe Nb+Ta Ti Al Other
Inconel 718 50-55 17-21 2.8-3.3 bal 4.75-5.5 0.65-1.15 0.2-0.8 Co 1.0 max, C ≤0.08
Monel K-500 63-70 - - 2.0 max - 0.35-0.85 2.3-3.15 Cu 27-33, C ≤0.25
Incoloy 925 42-46 19.5-22.5 2.5-3.5 22 min 0.5 max 1.9-2.4 0.1-0.5 Cu 1.5-3.0, C ≤0.03
Hastelloy C-276 bal 14.5-16.5 15-17 4-7 - - - W 3-4.5, C ≤0.01
Nimonic 90 bal 18-21 - 5 max - 1.8-3.0 0.8-2.0 Co 15-21
Inconel X-750 70 min 14-17 - 5-9 0.7-1.2 2.25-2.75 0.4-1.0 Co 1.0 max, C ≤0.08
Alloy 20 32-38 19-21 2-3 bal 8xC-1.0 - - Cu 3-4, C ≤0.07

 

Nickel Alloy Forgings Standards & Specifications

 

 

Standard Scope
ASTM B564 Nickel alloy forgings (general specification)
ASTM B637 Precipitation hardening Ni alloy forgings (718, X-750)
ASTM B462 Forged fittings and flanges (Alloy 20, Hastelloy)
ASME SB564 ASME code for pressure vessel forgings
NACE MR0175 Sour service forgings for oil & gas
AMS 5662 Inconel 718 forging, solution treated
AMS 5666 Inconel 625 forging, solution annealed
EN 10222-5 European standard for Ni alloy forgings
ASTM A182 Alloy steel flanges and forgings.

 

Forging Sizes & Specifications

 

 

Form Typical Size Range
Forged Bar Round bar Ø60–1,000 mm / Square bar 60–600 mm, length ≤6,000 mm
Forged Ring OD 150–4,500 mm, height / wall thickness 20–500 mm
Forged Flanges NPS 1/2"–24" (B16.5) / 26"–60" (B16.47), Class 150–2500
Forged Disc/Disk OD 100–2,000 mm, thickness 20–350 mm
Forging Billets Round / Square 80–600 mm, fixed length ≤6,000 mm
Forging Shaft Ø50–800 mm, length ≤8,000 mm
Forging Block Cross-section ≤500 mm, length ≤3,000 mm

 

Core Advantages and Performance of Nickel Alloy Forgings

 

 

Nickel alloy forgings deliver measurable advantages through directional grain flow from hot forging, outperforming common austenitic stainless steels such as 316L and 304 on multiple critical metrics.

Performance Item Quantified Advantage & Application Value
High-temperature strength & creep resistance Peak-aged Inconel 718 forgings reach 1240–1375 MPa tensile strength at room temperature. It retains ≥850 MPa tensile strength at 650°C and meets 1000h creep rupture requirement at 650°C / 580 MPa, with continuous service up to 700°C. Hastelloy X can run steadily at temperatures up to 1200°C. 316L stainless steel loses over 60% strength at 650°C under identical loading conditions.
Multi-media corrosion resistance Solution-annealed Hastelloy C-276 forging achieves corrosion rate ≤0.1 mm/year in 10% hydrochloric acid at 80°C. It resists chloride pitting, sour H₂S service, mixed oxidizing and reducing acids. Monel 400 shows corrosion rate below 0.025 mm/year in seawater and hydrofluoric acid, outperforming duplex and austenitic stainless steel on localized corrosion resistance.
Stress corrosion cracking resistance Controlled grain flow from forging slows crack propagation. Its SCC threshold is roughly 2.3 times higher than 316L under chloride + tensile stress, suitable for pressure-containing parts including wellheads, heat exchangers and reactors.
Excellent fatigue performance Continuous grain flow improves fatigue initiation life by 40%–60% compared with parts directly machined from bar stock. Inconel 718 rolled ring forgings maintain stable cyclic fatigue life at 650°C for rotating gas turbine components.
Stable low-temperature toughness Inconel 718 forgings serve down to -250°C, with impact toughness ≥40 J at -196°C. Monel 400 keeps ductility at -130°C for subsea and cryogenic processing equipment.
Tunable metallurgical structure Grain size is controlled by forging ratio and heat treatment. Fine-grain routes prioritize fatigue performance; coarse-grain schedules optimize creep rupture strength, matching aerospace and power generation design priorities.

Forging is the preferred forming route: castings contain porosity, shrinkage and segregation. Machining directly from bar stock cuts natural grain flow and reduces fatigue life by more than 35% under equivalent load. Request our test sample report to verify mechanical, creep and corrosion performance before batch order.

 

Where Nickel Alloy Forgings Are Used?

 

 

 

Inconel 601
Oil & Gas
Alloy 601 | Inconel® 601 Suppliers
Aerospace
Alloy 601 / Inconel 601 (UNS N06601)
Power Generation
Alloy 601
Chemical Processing
Inconel 601 N06601 2.4851 Nickel-Chromium Alloy
Marine
Inconel 601 Nickel Alloy (UNS N06601)
Nuclear

 

FAQ:

What types of forgings can you produce?

We produce four main types: open die forgings (flanges, rings, discs, blocks, shafts up to 3,000 kg), closed die forgings (near-net-shape components up to 500 kg), ring rolled forgings (seamless rings up to 2,500 mm OD), and upset forgings. We also supply forged bars and step shafts.

 

Can you produce forgings to customer drawings?

Yes. We work from customer drawings, 3D models (STEP, IGES), or samples. Our engineering team reviews each drawing for forgeability and suggests modifications to optimize the forging process while meeting final dimensional and property requirements. Tooling for closed die forgings is designed in-house.

 

What heat treatment do you provide?

We provide complete heat treatment services: solution annealing (to dissolve precipitates and homogenize structure), aging/precipitation hardening (to achieve target strength), stress relieving (to reduce residual stresses after machining), and quenching. All heat treatment is performed in computer-controlled furnaces with temperature chart recordings.

 

Do you supply forgings with NACE MR0175 certification?

Yes. We can supply forgings certified to NACE MR0175/ISO 15156 for sour oil and gas service. This includes controlled hardness (typically HRC 22 maximum) and specific heat treatment requirements. NACE certification documentation is provided with the MTR.

We're well-known as one of the leading nickel alloy forgings suppliers in China. If you're going to buy or wholesale high quality nickel alloy forgingsmade in China, welcome to get free sample from our factory. For price consultation, contact us.

whatsapp

Phone

E-mail

Inquiry