UNS N06625 Plate
As a leading supplier and manufacturer in China, GNEE Steel provides cost-effective nickel-based alloy products.
- Send E-mail: ss@gneesteel.com
- Tel: +8615824687445
Inconel® 625 (UNS N06625) is a nickel-based superalloy with excellent resistance to oxidation and corrosion. The nickel-chromium matrix of this material is reinforced by the addition of molybdenum and niobium, which is alloyed through solid solution strengthening. This process allows alloy Inconel® 625 to maintain high strength and toughness at temperatures ranging from cryogenic up to 1800°F (982°C).
Specification List of UNS N06625 Sheet / Plate
| ASTM Specification | ASTM A240 / ASME SA240 |
|---|---|
| Standard | MSRR, AMS, BS, ASTM A240 / ASME SA240 |
| Length & Sizes | 1000 mm x 2000 mm, 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1250mm x 2500mm, 1500mm x 3000mm to 6000mm, 2000mm x 4000mm to 6000mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm, 2m, 2.44m, 3m, 36" X 120" or 48" X 144", 4' x 8', Cut to size available |
| Thickness | 0.1mm to 100 mm Thk |
| Width | 10-2500mm |
| Hardness | Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc. |
| Temper | Annealed |
| Condition | Polished on both sides |
| Finish | Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated) |
| Stock in form of | Plate, Sheet, Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Clad Plate, Rolling Sheet, Flat Sheet, Rolling Plate, Flat Shim, Blank (Circle), hot rolled, cold rolled, annealed, soft annealed, descaled, sheared, tread plate, Checker Plate |
| Value Added Service | Cladding, Heat Treatment, Annealed, Pickling, Polish, Rolling, Cutting, Bending, Forging, Minor Fabrication Etc. |
inconel 625 UNS N06625 plate properites
Hot working properties:
Inconel 625 has good hot working properties at high temperatures, such as hot forging, hot rolling, hot extrusion, etc. Appropriate heating temperature and hot working conditions can make the alloy easy to deform and form.
Cold working properties:
Inconel 625 has certain plasticity at room temperature, but it is a heat-resistant alloy, so its cold working ability is limited. Large deformation and cold working may lead to increased brittleness of the alloy and decreased performance.
Weldability:
Inconel 625 has excellent weldability and can be connected by a variety of welding methods, such as TIG (tungsten inert gas shielded welding), MIG (metal inert gas shielded welding) and arc welding. However, it is important to control the welding temperature and welding heat input during the welding process to avoid alloy embrittlement and the generation of pores.
Work hardening:
Inconel 625 has certain work hardening, that is, grain refinement and strengthening will occur during the processing, improving the hardness and strength of the alloy. However, excessive work hardening may lead to increased brittleness of the alloy, so proper annealing is required during processing to restore the toughness and plasticity of the alloy.
Surface treatment:
When processing and manufacturing Inconel 625 parts, surface treatments such as pickling, shot peening or mechanical polishing are usually required to remove surface oxides, welding slag or other contaminants and improve the surface quality and corrosion resistance of the material.
Package&delivery
Hot Tags: uns n06625 plate, China uns n06625 plate suppliers, inconel alloy for flanges and seals and gaskets, inconel alloy for piping and tubing, inconel alloy for automotive industry, inconel alloy for pipes, Inconel 686, inconel alloy for generators
Previous
UNS N07718 PlateNext
UNS N06617 PlateYou Might Also Like
Send Inquiry