Will a magnet stick to Inconel?
Alloy 625 (AMS5666) (UNS N06625)
Alloy 625, commonly known as Inconel 625 (where Inconel is a trademark of Special Metals Corp), is a nickel-chromium-molybdenum-niobium alloy (NiCr22Mo9Nb).
Continue reading this page to learn more about Langley Alloys 625.


What are the uses of 625 alloy?
Alloy 625 is ideally suited for the most demanding applications, from sub-zero to extremely high temperature environments. It achieves this high strength due to the solid solution effect of molybdenum and niobium (also known as columbium) from room temperature to 800°C. Alloy 625 is typically supplied in the hot worked and annealed condition.
Alloy 625 is particularly useful where resistance to oxidation and avoidance of pitting corrosion is required. In the annealed condition, this Inconel alloy is fully austenitic and suitable for machining. Due to its high alloy content, it has excellent corrosion resistance in various severely corrosive environments. Containing nearly 60% nickel, it is virtually resistant to stress corrosion cracking.
Alloy 625 is non-magnetic and capable of operating over a wide temperature range, from cryogenics to 980 degrees Celsius. This supports applications in jet engines, heat exchangers, furnace hardware and chemical plant equipment.
GNEE STEEL's 625 Alloy
GNEE STEEL supplies alloy 625 in a variety of industry specifications. It is primarily available as ASTM B446 and is suitable for applications in the chemical processing and oil and gas industries.
GNEE STEEL maintains an extensive inventory of Alloy 625 in solid bar sizes from 0.5 in. (12.7 mm) to 10 in. (254 mm) diameter, meeting ASTM B446 Class 1 and 2 and SAE AMS 5666 requirements.
The most common specification is Grade 1 Alloy 625, but Langley Alloys can also supply Grade 2 Alloy 625 when required. For aerospace related applications we also offer Alloy 625 in compliance with SAE AMS 5666.

| Cr | Ni | Mo | Co | Nb (+Ta) | Ti | W | Cu | C | Mn | N | Si | P | S | Fe | Al | |
| Min | 20.00 | 58.00 | 8.00 | 3.15 | ||||||||||||
| Max | 23.00 | 10.00 | 1.00 | 4.15 | 0.40 | 0.10 | 0.50 | 0.50 | 0.015 | 0.015 | 5.00 | 0.40 |
Mechanical Properties:
| Bars up to and including 4" diameter or section | Bars above 4" diameter or section | |||
| 0.2% Proof Stress | 415 N/mm2 | 60ksi | 345 N/mm2 | 50ksi |
| Tensile Strength | 830 N/mm2 | 120ksi | 760 N/mm2 | 110ksi |
| Elongation, 5.65√S0 and 4D | 30% | 25% | ||
| Reduction of Area | 35% | 35% | ||
| Hardness (Brinell) | ||||





