Apr 30, 2024 Leave a message

What Is DC01 Cold Rolled Coil?

What is DC01 cold rolled coil?

What is DC01 cold rolled coil?

DC01 cold rolled coil is a cold rolled low carbon steel product with specific chemical composition and mechanical properties.

DC01 is a European standard grade, and the corresponding Chinese national standard is cold-rolled low carbon steel plates and steel strips in GBT 5213-2008. The chemical composition of this material is characterized by a carbon content of no more than 0.12%, a manganese content of no more than 0.60%, a residual content of sulfur and phosphorus of no more than 0.045%, and a total aluminum content of no less than 0.020%. In terms of mechanical properties, the tensile strength of DC01 is between 270 and 410MPa, the yield strength is between 130 and 260MPa, and the elongation after fracture is greater than or equal to 28%.

In the manufacturing process, DC01 cold-rolled coils are made from hot-rolled steel coils as raw materials. After pickling to remove scale, the finished product is continuously cold-rolled and is called hard-rolled coils. Due to the influence of continuous cold deformation, the strength and hardness of this material will increase, while the toughness index will decrease, so its stamping performance may not be suitable for the forming of complex parts. However, hard rolled coils can be used as raw materials for further processing, such as hot-dip galvanizing. The inner diameter is usually 610mm, and since it has not been annealed, its hardness is high and its machining performance is poor. It is usually only suitable for simple, directional bending of less than 90 degrees.

In general, DC01 cold rolled coil is suitable for the manufacture of simple formed metal parts and as a raw material for more complex processing processes due to its good mechanical properties and chemical composition.

What is DC01 cold rolled coil?

What is DC01 cold rolled coil?

Send Inquiry

whatsapp

Phone

E-mail

Inquiry