Apr 01, 2025 Leave a message

What Is C276 Pipe Made Of?

What is C276 pipe made of?

 

 

Gnee can produce Alloy C276 Nickel Tubing on time to meet the specific needs of your project. Our factory excels at handling non-standard requests and delivering them quickly, including custom sizes, specifications, lengths, and small batches. Whether your project is for the Chemical Processing, Department of Defense, or Oil and Gas industries, our unique factory manufacturing methods ensure that you get the Alloy C276 pipe you ordered quickly and accurately.

We manufacture seamless Alloy C276 tubing in sizing capabilities ranging from 2-1/16" to 10-3/4" OD with wall thicknesses up to 1.925". Contact us for more information on the lowest cost requirements for each size.

Alloy C276 Tubing Properties
Alloy C276 is a nickel-chromium-molybdenum solid solution strengthened super alloy with a nominal chemical composition of 57% nickel, 16% chromium, and 16% molybdenum with additions of iron, tungsten, and cobalt. It is commonly known by the Hastelloy C276 trade name and the generic name UNS N10276. C276 is often used in extremely corrosive environments where other alloys cannot withstand.

What is C276 pipe made of?What is C276 pipe made of?

Corrosion Resistance
Alloy C-276 is one of the most corrosion resistant alloys available. The nickel, chromium, and molybdenum in Alloy C-276 form a powerful triple threat against nearly all forms of corrosion. C-276 has excellent resistance to reducing and oxidizing acids, including sulfuric, hydrochloric, and acetic acids. It also performs well in seawater, chlorides, wet chlorine, oxidizing salts, and hypochlorites. The molybdenum and tungsten contents protect against all forms of localized corrosion, including pitting, crevice corrosion, and chloride stress corrosion cracking. C-276 has excellent oxidation resistance at elevated temperatures up to 1900°F (1038°C). C-276 is not recommended for use in extreme oxidizing environments, such as concentrated hot nitric acid.

High Temperature Resistance
C-276 resists oxidation at temperatures up to 1900°F (1038°C).

Mechanical Properties
In the annealed condition, C-276 has a yield strength of 41 ksi (345 MPa). However, higher strengths can be achieved by the pilger process. C-276 maintains excellent toughness at low temperatures.

Heat Treatment
C-276 cannot be strengthened by heat treatment. C-276 is typically solution annealed at 2050°F (1121°C) followed by rapid cooling.

Machinability
C-276 can be hot worked in the range of 1600°F - 2250°F (870°C - 1230°C). Annealing after hot working is recommended. Cold forming is possible, however, it has a high work hardening rate so an intermediate anneal may be required.

Applications
A workhorse in the chemical processing industry, C-276 is widely used in the oil and gas industry due to its resistance to a wide range of corrosive substances. In the upstream oil and gas industry, C-276 is used as pipe, casing or lining in corrosive sour service environments characterized by high levels of H2S, CO2 and chlorides. It is also used in other industries that encounter harsh environments, including the pharmaceutical and paper industries. C-276 is used in valves in cryogenic service and has been used in superconductors at temperatures as low as -455°F (-271°C).

Gnee Steel offers specialty alloy C-276 seamless pipe for a variety of industries and applications, including:

Extremely corrosive oil and gas wells containing CO2, H2S, S0 (elemental sulfur) and chlorides

Chemical processing
Paper and pulp
Industrial sand screens
Base pipe
Tubing, casing and liners

Send Inquiry

whatsapp

Phone

E-mail

Inquiry