Mar 27, 2024 Leave a message

What Are The Disadvantages Of Inconel 718?

What are the disadvantages of Inconel 718?

 

Inconel 718 is a high-performance nickel-iron-chromium-based superalloy originally developed by Inconel's Eiselstein in the late 1950s for use in gas turbine engines. It makes a significant contribution to meeting the requirements of advanced gas turbine engines. It is widely used in the aerospace field due to its good weldability and superior mechanical properties than other grades of superalloys. The high thermal strength of Inconel 718 alloy is mainly achieved through the precipitation of γ prime-[Ni3Ti, Ni3Al)] and γ biprime-[Ni3Nb] phases. General Electric uses 34 percent Inconel 718 alloy in the Boeing 787's CF6 engine, which is used to make aerospace engine components. It is used in hot parts of rockets and gas turbines, such as blades, disks and casings in the high-pressure areas of compressors and disks, as well as some blades in turbine parts with high-temperature strength, excellent creep and stress rupture properties. , good hot corrosion resistance and oxidation resistance are the main requirements. It involves two strengthening methods: solid solution strengthening (Fe, Cr, Mo, Nb atoms replace Ni in the Ni matrix) and precipitation strengthening of γ′ and γ″ precipitates. At a temperature close to 650 °C, Nb combines with Ni Forms the γ″ phase (Ni3Nb), providing excellent mechanical properties at very high temperatures.

What are the disadvantages of Inconel 718?

What are the disadvantages of Inconel 718?

Continuing improvements in efficiency, field performance and reduced maintenance of industrial gas turbine engines require widespread application of Inconel 718 alloy. They can withstand greater stresses at high temperatures up to 650 °C for extended periods of time, demonstrating their feasibility for use in advanced gas turbine engine technology. After 1950, the age of jet engines and rockets began, and it played an important role in the development of high-thrust engines. Without nickel-based superalloys, aircraft would fly with less power and at slower speeds. The most effective way to accelerate the thrust of an aeroengine is to increase its operating temperature. It is limited by the high temperature resistance of the metals used in aerospace engine components. It must be harder and resistant to corrosion, oxidation and deformation at high temperatures. Most materials experience accelerated creep at temperatures 30-40% of their melting point. For example, titanium alloys creep rapidly above 360°C. Inconel 718 superalloy has excellent creep resistance and can therefore be used at temperatures up to 860 °C, which is 70% above its melting point (Tm = 1430 °C). Over the past two decades, gas turbine engine propulsion has increased by 60 percent while fuel consumption has decreased by 20 percent. It extends the operating limits of superalloys to 1300 °C, contributing to powerful jet engines.

Send Inquiry

whatsapp

Phone

E-mail

Inquiry