Jan 29, 2024 Leave a message

NO8810 Nickel-based Alloy Steel

NO8810 nickel-based alloy steel

 

Nickel-based alloy NO8810 is a solid solution high-strength austenitic nickel-iron-chromium alloy containing carbon, aluminum, titanium, silicon, manganese and limited amount (Al+Ti). Its chemical composition is similar to that of 800 alloy. The difference is that after special solid solution treatment (grain size ≥90 μm/ASTM No. 4), the tensile strength of alloy 800H above 600°C is significantly improved. We recommend the use of 800 alloy in applications below 600°C.

have characteristics

Since the content of (Al+Ti) is not higher than 0.7%, Alloy 800H has good tensile strength above 600°C and
And it still has good toughness when working under 700℃ for a long time.
It has good resistance to reduction, oxidation, nitriding medium corrosion and resistance to oxidation-reduction alternating medium corrosion.

NO8810 nickel-based alloy steel

NO8810 nickel-based alloy steel

High metallurgical stability in high temperature long-term applications.
Alloy 800HT is a solid solution high-strength austenitic nickel containing carbon, aluminum, titanium, silicon, manganese and increased (Al+Ti) content-
Iron-chromium alloy, after special solid solution treatment (grain size ≥90μm/ASTMNo.4), TiC precipitation phase is obtained.
Alloy 800HT has the highest tensile strength above 700°C. This alloy has the following properties:
It has excellent yield strength above 700℃. If the material is regularly used in environments with temperatures below 700℃
Or when some materials are exposed to working conditions below 700℃ for a long time, alloy 800H is recommended.
It has good resistance to reduction, oxidation, nitriding medium corrosion and resistance to oxidation-reduction alternating medium corrosion.
High metallurgical stability in high temperature long-term applications.
Density: 8.0g/cm3

Corrosion resistance

Melting point: 1350-1400℃
The higher nickel and chromium content makes the 800H/800HT alloy have excellent oxidation resistance, as well as excellent resistance to carbonization and nitrogen.
Chemical resistance and resistance to sulfide gas corrosion. During the heating, cooling and heat preservation processes of heat treatment, a layer of heat will be formed on the metal surface.
This kind of pre-oxidation can improve the carbonization resistance before the material is put into use. 800H/800HT alloy also has
Excellent hydrogen corrosion resistance, it is the standard material selection in hydrogen atmosphere/hydrocarbon reforming process.

Application scope

Due to its high strength and resistance to carbonization and nitriding during long-term operation, 800H/800HT alloy can be used in many occasions.
Such as spiral tubes, straight tubes, steam headers, manifolds, transmission pipelines, catalyst tubes (low pressure) and condensation in steam/hydrocarbon reforming processes
System piping, etc.

Other application areas

Resistance to carbonization and good mechanical properties - convection and radiant parts of ethylene decomposition tube furnaces
Resistant to carbonization and HCl and Cl2 corrosion-dichloroethylene cracking pipe
High strength, anti-carbonation, no σ phase generation - cracking pipes in acetic anhydride and ketene production
High strength, resistant to helium and steam corrosion - helium cooled steam system, high temperature reaction system
Heat exchangers, heat exchange tubes, heating tubes and other piping systems
NO8810 nickel-based alloy steel

 

Send Inquiry

whatsapp

Phone

E-mail

Inquiry