1. Question: What are the main applications of these alloys?
Answer:
N07751 / Alloy 751 Superalloy Sheet: Primarily used in internal combustion engine components, gas turbine parts, and high-temperature industrial applications due to excellent high-temperature strength and oxidation resistance.
Inconel 751 Nickel Alloy Plate: Suitable for aerospace, turbine blades, heat exchangers, and high-strength engine parts where corrosion and heat resistance are critical.
2. Question: What are the typical mechanical and thermal properties?
Answer:
Alloy 751 / N07751:
Tensile strength: ~1240 MPa
Yield strength: ~1035 MPa
Excellent creep and fatigue resistance at up to 700°C
High resistance to oxidation and hot corrosion
Inconel 751:
Tensile strength: ~1100–1250 MPa
Maintains strength up to 700°C
Good fatigue, stress-rupture, and corrosion resistance
3. Question: What sizes and forms are available?
Answer:
Alloy 751 Sheet: Available as sheets and strips
Thickness: 1 mm – 20 mm
Width: 500–2000 mm
Length: up to 6000 mm
Inconel 751 Plate: Typically supplied as plates
Thickness: 3 mm – 100 mm
Custom dimensions are available for engine or turbine applications
4. Question: How do these alloys perform in high-temperature and corrosive environments?
Answer:
Both alloys have excellent oxidation resistance at elevated temperatures and maintain mechanical strength.
Alloy 751 is specifically designed for high-temperature internal combustion engine environments, resisting scaling and creep.
Inconel 751 is resistant to hot corrosion, sulfur compounds, and oxidizing atmospheres, making it suitable for aerospace and turbine applications.
5. Question: Are there any special processing or heat treatment requirements?
Answer:
Alloy 751 / N07751: Solution annealing at 980–1020°C, followed by aging at 720–760°C to achieve maximum strength.
Inconel 751: Precipitation-hardening alloy; requires solution annealing and controlled aging to ensure high creep and fatigue resistance.
Both alloys require precision machining and careful surface finishing for high-performance applications.





