Monel 400 Implementation Standard Monel 400 Hardness
Monel 400 Monel
Overview of Monel 400 Characteristics and Application Fields:
Monel 400 (UNS N04400, NCu30) The structure of Monel 400 alloy is a high-strength single-phase solid solution. It is a corrosion-resistant alloy with the largest dosage, the widest application, and excellent comprehensive performance. This alloy has excellent corrosion resistance in hydrofluoric acid and fluorine gas media, and also has excellent corrosion resistance to hot concentrated alkali solution. At the same time, it is also resistant to corrosion by neutral solutions, water, seawater, atmosphere, organic compounds, etc. An important feature of this alloy is that it generally does not produce stress corrosion cracks and has good cutting performance.


Alloy 400 is a copper-nickel alloy with excellent corrosion resistance. It has good corrosion resistance in various media, good welding performance, high strength and medium strength. The alloy has been widely used in many occasions. It has excellent resistance to pitting and stress corrosion in salt water or seawater. Especially resistant to hydrofluoric acid and hydrochloric acid. It is widely used in chemical, petroleum and marine industries.
Physical properties of Monel 400:
Density 8.83g/cm3
Melting point 1300-1390℃
Mechanical properties of Monel 400: (minimum value of mechanical properties tested at 20℃)
Tensile strength Rm N/mm2
Yield strength RP0.2N/mm2
Elongation A5 %
Monel 400 production execution standard:
Round steel, bars, strips, pipes, valve seats, balls, flanges and forgings are supplied by negotiation
Metallurgical structure of Monel 400:
The structure of Monel400 alloy is a high-strength single-phase solid solution.
Process performance and requirements of Monel 400:
Hot processing
Annealing temperature should be controlled at 700-900 ℃, and rapid air cooling is recommended to obtain the best corrosion resistance. Time and temperature will directly affect the final grain size, and annealing parameters must be carefully formulated.
Cold processing
Intermediate annealing should be performed during cold processing. It has a high work hardening rate
The cold forming deformation should be higher than 5%, and it must be used after stress relief or annealing
Monel400 welding process
Welding can be performed by argon arc welding, plasma arc, gas shielded welding or manual arc welding. Pulse arc welding is recommended first, and surface treatment is best performed after welding.
Application range.
Monel400 alloy is a versatile material that can be used in many industrial fields:
1. Seamless water pipes and steam pipes in power plants
2. Seawater exchangers and evaporators
3. Sulfuric acid and hydrochloric acid environments
4. Crude oil distillation
5. Pump shafts and propellers for equipment used in seawater
6. Equipment for uranium refining and isotope separation in the nuclear industry
7. Pumps and valves used in the manufacture of hydrochloric acid equipment





