1. What are the typical applications of these pipes and tubes?
Answer: Hot rolled seamless steel pipes and Inconel 690 alloy capillary tubes are used in industries requiring high strength, corrosion resistance, and precision. Typical applications include chemical and petrochemical plants, power generation, heat exchangers, steam generators, condensers, nuclear reactors, and high-pressure hydraulic or instrumentation lines. Inconel 690, in particular, is ideal for high-temperature and highly corrosive environments.
2. What are the key chemical compositions?
Answer:
Inconel 690 (UNS N06690): Nickel 58% min, Chromium 27–31%, Iron ≤10%, Manganese ≤1%, Silicon ≤1%, Carbon ≤0.10%, Copper ≤0.50%
Hot Rolled Seamless Steel Pipes: Carbon 0.05–0.25% (depending on grade), Manganese 0.3–1.0%, Phosphorus ≤0.035%, Sulfur ≤0.035%, Iron balance
These compositions provide excellent corrosion resistance, high-temperature stability, and mechanical strength.
3. What mechanical properties can be expected?
Answer:
Inconel 690 Alloy:
Tensile Strength: 550–750 MPa
Yield Strength: 275 MPa min
Elongation: 30% min
Hardness: ≤250 HB
Hot Rolled Seamless Steel Pipe:
Tensile Strength: 415–550 MPa
Yield Strength: 250–350 MPa
Elongation: 20–30%
These properties make them suitable for high-pressure, high-temperature, and corrosive applications.
4. What standards do these products comply with?
Answer:
Inconel 690 Capillary Tubes: ASTM B837, ASTM B163, ASTM B167
Hot Rolled Seamless Steel Pipes: ASTM A106, ASTM A179, ASTM A213
ASME certification may also apply for pressure vessel or piping applications.
These standards ensure consistent chemical composition, mechanical properties, and dimensional accuracy.
5. How should these pipes and tubes be handled and maintained?
Answer:
Store in a clean, dry, and ventilated area to prevent corrosion.
Avoid contact with strong acids or reducing agents unless compatible with the specific alloy.
Handle carefully to prevent bending, dents, or scratches, especially for thin-walled capillary tubes.
Clean surfaces before installation to remove oil, dust, or residues.
Regular inspection is recommended for high-temperature or corrosive service environments.





