1. What are the primary applications of these metal plates and sheets?
Answer:
Hastelloy C276 (B/B2/B3): Chemical process equipment, corrosion-resistant piping, heat exchangers
Carbon Steel Plates (ASTM A36, A283, S235): Structural beams, machinery parts, construction
Stainless Steel (304, 316): Food processing, chemical industry, marine environments, architectural panels
Galvanized Aluminum: Roofing, cladding, HVAC ducts, corrosion protection
Inconel 601 & 738: High-temperature turbine components, aerospace, chemical processing
Titanium: Aerospace, medical implants, marine, chemical equipment
2. What are the corrosion resistance properties of these materials?
Answer:
Hastelloy C276: Excellent resistance to oxidizing and reducing chemicals, strong against pitting and crevice corrosion
304 SS: Good corrosion resistance in mild environments
316 SS: Superior resistance to chlorides and marine environments
Galvanized Aluminum: Resistant to atmospheric corrosion
Inconel 601 & 738: Excellent high-temperature oxidation and corrosion resistance
Carbon Steel Plates: Poor corrosion resistance unless coated or painted
Titanium: Excellent corrosion resistance in acids and seawater
3. What are the mechanical properties of these metal sheets/plates?
Answer:
Carbon Steel (A36/S235/A283): Tensile 400–550 MPa, Yield 250–360 MPa, Elongation 20–26%
Stainless Steel 304: Tensile 505–700 MPa, Yield 215–275 MPa, Elongation 40%
Stainless Steel 316: Tensile 515–720 MPa, Yield 205–290 MPa, Elongation 40%
Inconel 601: Tensile 760 MPa, Yield 310 MPa, high creep resistance at 1000°C
Inconel 738: Tensile 1,200–1,400 MPa, precipitation-hardened, high-temperature strength
Hastelloy C276: Tensile 485–690 MPa, Yield 240–380 MPa
Titanium: Tensile 434–1,050 MPa depending on grade, lightweight and strong
Galvanized Aluminum: Tensile 200–300 MPa, lightweight, moderate strength
4. What are the typical standards and grades for these materials?
Answer:
Carbon Steel: ASTM A36, A283, S235
Stainless Steel: ASTM A240 for 304 & 316
Hastelloy C276: UNS N10276, ASME SB-574
Inconel: ASTM B443 (601), B637 (738)
Titanium: ASTM B265
Galvanized Aluminum: ASTM B209, EN 485
5. What customization and surface options are available?
Answer:
Plates/Sheets: Cut-to-size, thickness 1–200 mm, width up to 2500 mm
Surface finishes: Polished, brushed, bright, mill finish, galvanized coating, painted, or anodized
Forms: Sheets, plates, coils, or cut blanks
Special processing: Heat treatment, annealing, cold rolling, or hardening for high-temperature alloys (Inconel, Hastelloy)





