Mar 13, 2024 Leave a message

Hastelloy And Its Classification And Overview

Hastelloy and its classification and overview

 

Hastelloy itself is a nickel-based alloy, but it is different from pure nickel (Ni200) and Monel. With chromium and molybdenum as the main alloy elements, it is designed to improve adaptability to various media and temperatures, and has been specifically optimized for different industries. At present, the chemical industry generally pursues high production capacity, constantly improves processes, increases temperature and pressure, and speeds up reaction speeds, making production prone to unpredictable situations and leading to unplanned maintenance. Hastelloy is designed to meet such needs, adapt to various unpredictable and harsh environments, and minimize unplanned maintenance. At the same time, it also has good processing and welding performance, which facilitates on-site maintenance.

Carbide classification At present, corrosion-resistant cemented carbide is mainly divided into C series, B series, G series and D series. Table 1 lists the composition of some commonly used hardstone alloys.

Hastelloy and its classification and overview

Hastelloy and its classification and overview

C-series alloy is a Ni-Cr-Mo alloy. Since chromium can form a dense oxide film (passivation) on the alloy surface, it provides anti-oxidation ability, while molybdenum mainly provides anti-reduction ability. Therefore, C-series alloys can be used in both oxidizing and reducing media. C series alloys are the most widely used alloys, especially C-276 alloy. After their invention in the 1960s, C series alloys still show strong vitality after more than 40 years of testing. The C-4 was developed to meet the needs of a small number of European users and is currently only used in older equipment. Without increasing the cost, the corrosion resistance of C-22 alloy is improved, and the price-performance ratio is particularly good. C-2000? As a new generation product, it provides a wider range of safe use and is very suitable for users to extend the life of equipment and test new technologies. At present, C-series alloys have been used in many industries in my country. Such as fine chemicals (TDI, PTA, acetic anhydride, acrylic acid, etc.); environmental engineering industry (flue gas desulfurization, sewage treatment); plate heat exchanger industry. It has been used in many industries abroad, but it is still in the experimental stage domestically, such as the pharmaceutical industry.

B-series alloys are nickel-molybdenum alloys that offer the best corrosion resistance in fully reduced environments. While B-series alloys perform well in reducing environments, they have good resistance to oxidizing media (iron, etc.). 50 ppm iron ions greatly reduce the corrosion resistance of B-series alloys. B series alloys have relatively concentrated applications due to their special properties. The most important of these is the production of acetic acid (oxo synthesis), and many sulfuric acid recovery systems also use this series of alloys. At present, the widely used brand B-3B-2 is gradually withdrawing from the market due to its poor processing performance.

​G series alloys are nickel-chromium-iron alloys (except G-35)? alloy). The high chromium content gives this series of alloys excellent oxidation resistance. At the same time, the new G series alloy (G-30? G-35?) also has good pitting corrosion resistance, contains less copper, and improves resistance to sulfuric acid and hydrofluoric acid. Therefore, G series alloys are mainly used in strong oxidizing environments and complex mixed acid environments, such as wet phosphoric acid and steel plant pickling lines.

The D series alloy is a Ni-Cr-Si alloy. Since this series of alloys contains a certain amount of silicon, it can produce a fairly stable oxide film on the surface. It is suitable for extremely strong oxidizing environments, but it is difficult to weld HART alloy pipes. Currently, the D series alloy is D-205 alloy, which is suitable for plate heat exchangers in high-temperature concentrated sulfuric acid environments. The alloy is currently only represented through Afrafa and only finished panels are available.

Hastelloy continues to develop and new alloy materials are developed to promote the development of industry. It has good environmental adaptability and reliable corrosion resistance. Targeted solutions for the special environments of different industries. As a mature commercial product, Hastelloy has a variety of product forms that can fully meet various needs.

Send Inquiry

whatsapp

Phone

E-mail

Inquiry