Nov 05, 2025 Leave a message

astm-b444-(1)-(1).pdf

Complete Specifications/Nickel Base Alloy Plate 825 Inconel625 /Pure Nickel Sheet Strip Plate

1. What are the main chemical compositions of Nickel Alloy 825, Inconel 625, and Pure Nickel plates?

 

Answer:

Incoloy 825 (UNS N08825): Nickel 38–46%, Iron (balance), Chromium 19.5–23.5%, Molybdenum 2.5–3.5%, Copper 1.5–3%, Titanium 0.6–1.2%.

Inconel 625 (UNS N06625): Nickel (≥58%), Chromium 20–23%, Molybdenum 8–10%, Niobium + Tantalum 3.15–4.15%, Iron ≤5%.

Pure Nickel (Nickel 200/201): Nickel ≥99.0–99.6%, trace amounts of iron, carbon, sulfur, and copper.

Each alloy offers a distinct balance of corrosion resistance, mechanical strength, and temperature performance.

 


2. What are the typical mechanical properties of these nickel-based plates?

 

Answer:

Property Incoloy 825 Inconel 625 Pure Nickel (Ni 200)
Tensile Strength 550–700 MPa 760–950 MPa 380 MPa
Yield Strength (0.2% offset) 220–350 MPa 400–600 MPa 100 MPa
Elongation ≥30% ≥30% ≥40%
Hardness (HB) ≤200 ≤220 ≤110

 

These values vary depending on plate thickness and heat treatment condition.

 


3. What standards and specifications apply to these nickel alloy and pure nickel plates?

 

Answer:

Incoloy 825: ASTM B424 / ASME SB424

Inconel 625: ASTM B443 / ASME SB443

Pure Nickel (Nickel 200 / 201): ASTM B162 / ASME SB162
All materials conform to ASME Section II for pressure vessel applications and are available in plate, sheet, and strip forms with standard tolerances per ASTM A480.

 


4. What are the typical applications for Nickel 825, Inconel 625, and Pure Nickel plates and strips?

 

Answer:

Incoloy 825: Chemical processing equipment, acid production plants, pollution control, and marine exhaust systems.

Inconel 625: Heat exchangers, turbine exhausts, aerospace components, and offshore oil and gas piping.

Pure Nickel: Alkaline battery production, caustic soda manufacturing, electronic components, and food processing equipment.

Each alloy's selection depends on the balance between corrosion environment, temperature, and required mechanical strength.

 


5. What are the available forms, sizes, and surface finishes for these nickel alloys?

 

Answer:

Forms: Plate, Sheet, Strip, and Coil.

Thickness Range: 0.3 mm – 100 mm.

Width: Up to 2000 mm; Length: Up to 6000 mm (custom cut available).

Finishes: Cold-rolled (2B), Hot-rolled (No.1), Bright Annealed (BA), Polished, or Custom Brushed.

Tolerances: Per ASTM standards or customer requirement (±0.05 mm typical for thin strips).

Send Inquiry

whatsapp

Phone

E-mail

Inquiry