Comparison of GH3044, GH3039 and GH44 high-temperature alloy steel pipes

Comparison of GH3044, GH3039 and GH44 high-temperature alloy steel pipes
GH3044 and GH3039 are both nickel-based, solid-solution strengthened superalloys characterized by excellent thermal fatigue resistance and cold formability; they are widely used in aero-engine combustion chambers, afterburners, and industrial furnace piping.
The key differences between the two lie in the following areas: Regarding temperature limits, GH3044 exhibits moderate thermal strength and good ductility below 900°C, with oxidation resistance extending up to 1000°C, whereas GH3039 is designed for long-term service at temperatures below 850°C.
What is GH3039 material?
GH3039 is a single-phase austenitic solid solution reinforced alloy with moderate hot strength, good thermal fatigue performance below 800℃, and good oxidation resistance below 1000℃. This material exhibits good long-term stability and good cold formability and weldability.

Gnee Alloy GH3039 Seamless Pipe: Differences in Melting Grades
| Melting Process / Grade | Typical Applications | Inspection Standards | Key Documentation / Certifications | Budget / Suitability |
|---|---|---|---|---|
| Single‑melt VIM (Industrial‑Grade) | Standard industrial furnaces; non‑critical petrochemical circulation piping | Single‑pass UT wall thickness testing; standard MTC 3.1 certificate | Lower procurement cost | Not suitable for tenders involving core gas piping for military aero‑engines |
| VIM + ESR (Aerospace‑Quality, two grades available) | High‑temperature piping for military / civil aero‑engines; high‑standard EPC projects in the Middle East or Kazakhstan | Triple NDT (100% UT + Eddy Current); full‑batch PMI traceability | Supports SGS/TÜV 3.2 witness reports; complete export licenses for dual‑use items; Chile equivalent certificates of conformity | Higher cost; mandatory for aviation and high‑spec projects |
Chemical Composition of GH3039 and GH3044 Pipes (GB/T 14992 Standard)
| Element | GH3039(GH39) Standard Range | GNEE Pipe Control | GH3044(GH44) Standard Range | GNEE Pipe Control | Pipeline Quality Risk For Low Standard Material |
|---|---|---|---|---|---|
| Ni | Remainder | 78~81 | Remainder | 59~63 | Insufficient Ni weakens pipe matrix high temp stability |
| Cr | 19.0~22.0 | 19.8~21.5 | 23.5~26.5 | 24.2~26.0 | Low Cr leads rapid oxidation inside pipeline |
| W | 0 | No tungsten | 13.0~16.0 | 13.8~15.5 | W is core anti-oxidation element of GH44 pipe |
| Mo | 1.8~2.3 | 1.9~2.2 | ≤1.5 | ≤1.2 | Mo improves GH39 thermal cycle fatigue resistance |
| Ti/Al | Ti0.35~0.75 Al0.3~0.7 | Balanced ratio | Ti0.3~0.7 Al≤0.5 | Balanced ratio | Unbalanced Ti/Al causes pipe bending cracking |
| Fe | ≤1.5 | ≤1.2 | ≤4.0 | ≤2.0 | Excessive Fe sharply cuts oxidation resistance |
| S/P | ≤0.013 | ≤0.010 | ≤0.013 | ≤0.010 | High S/P triggers thin pipe TIG welding crack |
Performance Comparison Table for GH3039 and GH3044 Seamless Pipes
| Contrast Item | GH3039(GH39) Seamless Pipe | GH3044(GH44) Seamless Pipe | Engineering Pipeline Selection Suggestion |
|---|---|---|---|
| Long-Term Safe Working Temp | Max 850℃ continuous service | Max 900℃ static constant temp | Cyclic heating pick GH39; static high temp gas pipe pick GH44 |
| 1000℃ Oxidation Weight Loss | 0.28mg/cm²·h | ≤0.10mg/cm²·h | GH44 pipe static anti-oxidation capacity 2.8 times higher |
| Thermal Cycle Fatigue Life (800℃ repeated cold/hot) | Excellent | Ordinary, easy to peel after frequent temperature shock | Furnace reciprocating heat exchange pipe choose GH39 |
| Cold Bending Ductility | Ultra-high, low stamping crack rate | Good but inferior to GH39 | Complex bent pipeline priority GH39 |
| 900℃ 100h Creep Strength | Medium | Higher static creep resistance | Long static load gas delivery pipe use GH44 |
| Raw Material Unit Cost | Medium-Low (12~18% cheaper) | Medium-High | Mass low-cycle pipeline cost-saving choose GH39 |
| Chile Equivalent Grade | ЭИ602 | ЭИ868 | Kazakhstan CIS military aero pipe matching basis |
Mechanical Properties of GH3039 and GH3044 Pipes-Solution-Treated Condition
GH3044 (GH44)
| Product Form | UTS (MPa) | YS 0.2% (MPa) | Elongation δ5 (%) | Hardness | Source |
|---|---|---|---|---|---|
| Tube / General | ≥ 685 | - | ≥ 40 | - | |
| Typical (Plate/Bar) | ≥ 685 – 735 | - | ≥ 40 | - |
GH3039
| Product Form | UTS (MPa) | YS 0.2% (MPa) | Elongation δ5 (%) | Hardness | Source |
|---|---|---|---|---|---|
| Tube (Standard) | ≥ 735 | - | ≥ 40 | - | |
| Cold-rolled sheet | ≥ 735 | - | ≥ 40 | - | |
| Bar | ≥ 735 | - | ≥ 40 | - |
GH3044 And GH3039 Tube Heat Treatment Requirements
GH3044 (GH44)
| Condition | Temperature | Cooling | Application |
|---|---|---|---|
| Standard Solution (Tube) | 1120 – 1160°C | Air Cool (AC) | Tube - standard delivery condition |
GH3039
| Condition | Temperature | Cooling | Application |
|---|---|---|---|
| Standard Solution (Tube) | 1050 – 1080°C | Air Cool (AC) or Water Quench (WQ) | Tube - standard delivery condition |
| Alternative | 1050 – 1090°C | Air Cool (AC) | Sheet, plate - standard delivery condition |
GH3044 And GH3039 Tube Manufacturing & Processing
| Parameter | GH3044 (GH44) | GH3039 |
|---|---|---|
| Tube Manufacturing Method | Cold-drawn / cold-rolled seamless tube; often uses hot-rolled bar → boring → cold rolling process | Cold-drawn / cold-rolled seamless tube |
| Applicable Tube Standard | GB/T 15062 | GB/T 15062 |
| Welding Methods | TIG, spot welding, seam welding, brazing | TIG, spot welding, seam welding - low crack sensitivity |
| Weldable Combinations | Weldable to 1Cr18Ni9Ti, GH1140, GH3030, GH3039 | Weldable to GH1140, GH3030, GH3044 |
| Surface Protection | W-2 enamel coating for high-temperature components | - |
Applications of GH3044 and GH3039 Seamless Pipes
GH3039 (GH39) Seamless Pipe – Matching Pipeline Projects
| Application | Service Characteristics | Key Requirement |
|---|---|---|
| Aerospace Engine Afterburner Branch Heat Pipe | Recurring 600–850°C temperature fluctuation | Strong thermal fatigue resistance |
| Industrial Furnace Reciprocating Heat Exchange Radiant Tube | Long‑term cold & hot alternating working environment | Thermal shock resistance |
| Petrochemical Medium‑Temp Circulation Delivery Pipe | Repeated heating medium pipeline; mass production cost control demand | Cost‑effective high‑temp stability |
| Thermocouple Protective Thin Pipe | Requires complex small‑radius bending forming | Good formability and precision |
GH3044 (GH44) Seamless Pipe – Matching Pipeline Projects
| Application | Service Characteristics | Key Requirement |
|---|---|---|
| Jet Engine Main Combustion Chamber Static Gas Pipe | Stable 900°C constant high‑temperature gas delivery | High‑temperature oxidation resistance |
| Ultra‑High Temp Static Furnace Radiant Tube | Long‑term constant temperature operation; oxidation resistance priority | Superior oxidation resistance |
| Petrochemical High‑Temp Reactor Static Conduit | No frequent temperature shock; anti‑scaling demand | Anti‑scaling / oxidation protection |
| Military Aircraft Static Heat Insulation Conduit (Kazakhstan CIS ЭИ868 standard tender) | Static high‑temp insulation | Compliance with Chile ЭИ868 standard |
Contact our experts to recommend the right alloy for your project
Gnee Alloy GH3039 High-Temperature Alloy: Product Packaging and Shipping


Gnee Alloy GH4169 Bar Inspection and Production Equipment


GNEE GH3039 Seamless Pipe Production Line and Manufacturing Capabilities
1 Dedicated 8,500 m² cold-rolled seamless pipe workshop equipped with multi-pass drawing machinery imported from Germany
2 VIM+ESR (Vacuum Induction Melting + Electroslag Remelting) vacuum smelting production line dedicated to high-temperature piping
3 Specialized pipe testing laboratory: equipped with eddy current flaw detectors, high-temperature oxidation furnaces, and creep testing machines
4 Comprehensive certifications: ISO9001, SGS, TUV, and GJB (National Military Standard) certification for aerospace piping
5 18 years of experience in seamless pipe exports; expert knowledge of global customs clearance procedures for dual-use (military and civilian) materials
6 Flexible Minimum Order Quantity (MOQ): free small-batch samples available (shipping costs borne by the customer); support for annual framework agreements to lock in preferential pricing

Gnee Alloy GH3039 certificate
About Gnee Alloy

Submit the following information to receive an accurate piping quote within one hour:
1 Target Alloy: GH3039 (GH39) / GH3044 (GH44)
2 Detailed Specifications: Outer diameter, wall thickness, length, and surface finish (BA/AP/Polished)
3 Operating Conditions: Constant high-temperature static exposure / Frequent thermal cycling; maximum continuous operating temperature
4 Smelting Grade: VIM (Industrial Grade) / VIM+ESR (Aviation Grade)
5 Export Destination & Certification Requirements (e.g., 3.2 Certificate / Chile Conformity Certification / Dual-use Item License)
Free seamless pipe samples available for oxidation resistance and bending performance testing
Performance comparison data sheet provided immediately upon submission of inquiry
FAQ
Q1 What is the difference between GH39 and GH3039, GH44 and GH3044?
A GH39 is the short industry alias of official grade GH3039, equivalent Chile ЭИ602; GH44 is short alias of GH3044, equivalent ЭИ868. They are the same material, only different naming habits, chemical and pipe performance fully consistent. Do not separate them as different alloys when purchasing.
Q2 How to quickly choose between GH39 and GH44 seamless pipe?
A 1 Pipeline with frequent heating-cooling reciprocating cycles (furnace heat exchange tube, afterburner branch pipe): Choose GH3039(GH39), superior thermal fatigue & bending performance, lower cost 2 Pipeline running at stable constant high temperature without temperature shock (engine main gas pipe, static radiant tube): Choose GH3044(GH44), outstanding static anti-oxidation capacity up to 900℃
Q3 What's the standard heat treatment for two kinds of seamless pipe, need aging?
A Both are solid-solution alloys, aging treatment is unnecessary. GH3039 pipe solution temp 1080℃ air cooling; GH3044 pipe solution temp 1140~1160℃ air cooling. Only single heat treatment can release pipe bending & welding ductility.
Q4 What melting grade to select for aero engine core gas pipe export to Kazakhstan?
A Must adopt VIM+ESR double vacuum melting aviation grade seamless pipe, provide full triple UT+ED NDT report + ЭИ868/ЭИ602 Chile conformity certificate + dual-use material export permit to pass customs and military audit.
Q5 What surface finish is most popular for export high temp seamless pipe?
A AP pickled matte pipe for mass furnace pipeline (low cost); BA bright inert annealed pipe for aero engine internal gas pipeline (zero oxide scale, avoid medium contamination); polished thin pipe for thermocouple sleeves.
Q6 What NDT inspection do we implement for finished seamless pipe?
Industrial VIM grade: 100% ultrasonic wall thickness scanning; Aviation VIM+ESR grade: 100% UT + eddy current double flaw detection, full batch PMI traceability record attached to MTC.
Q7 What delivery cycle for stock & custom seamless pipe?
Standard stock OD/wall pipe:7–15 working days after deposit; Custom bending/flanging processing 15–25 days; Custom vacuum ingot production 30–45 working days, priority line for emergency MRO orders.
Q8 What welding process recommended for GH39/GH44 thin seamless pipe?
Exclusive TIG low heat input welding; After welding 1050~1120℃ stress relief annealing is suggested to restore pipe high-temperature oxidation & fatigue resistance. Free welding parameter guide upon request.
Q9 What seaworthy packaging for long-distance sea shipment of thin high temp pipe?
Single pipe plastic end caps + internal & external anti-rust oil, separated anti-collision foam, double waterproof film wrapped, sealed fumigated wooden case with steel strapping, full loading photos sent before shipment.





