Oct 16, 2025 Leave a message

ASTM B514 UNS N08800 Nickel Alloy Seamless Pipe For Gas Processing

 
 
 
ASTM B514 UNS N08800 Nickel alloy seamless pipe for gas processing
ASTM B514 UNS N08800 Nickel alloy welded pipe for gas processing
01.

ASTM B514 UNS N08800 Nickel alloy seamless pipe for gas processing

ASTM B514 UNS N08800 nickel alloy seamless tubing is suitable for natural gas processing in Central Taiwan due to its high-temperature resistance, excellent corrosion resistance (including oxidation and carburization), and strength in harsh environments. It can be used in a variety of high-temperature and high-pressure applications, such as petrochemical reformers, heat exchangers, and furnace components. Key features include a wide operating temperature range up to 1100°F (593°C) and good resistance to a variety of corrosive and high-temperature environments.

02.

What is the difference between Alloy 800 and Alloy 800H?

Alloy 800H and Alloy 800HT are generally considered superior to base Alloy 800 (UNS N08800) because they offer superior creep and stress-rupture resistance and a tighter carbon content range. Alloy 800H limits carbon content to between 0.5% and 0.1%, while base Alloy 800 has a maximum carbon content of only 0.1%.

Alloy 800 And Alloy 800H

ASTM B514, a standard developed by the American Society for Testing and Materials (ASTM), specifically specifies the chemical composition, mechanical properties, dimensional tolerances, test methods, and technical requirements for welded nickel-iron-chromium alloy pipe. UNS N08800 alloy steel is commonly referred to commercially as Incoloy 800.

 

While Incoloy 800 is technically a nickel-iron-chromium alloy with approximately 30-35% nickel and 39% iron, its properties are closer to those of nickel-base alloys, and therefore it is often referred to as such. Unlike seamless pipe, welded pipe is produced by cold-rolling flat sheets or coils and then welding the seams together. The welding method typically used is inert gas shielded welding, such as TIG welding.

 

ASTM B514 N08800 Pipe Quality Control and Testing Requirements

Chemical composition analysis verifies that the alloy composition meets the requirements for N08800 pipe.

Mechanical property testing, such as tensile testing, verifies tensile strength and yield strength. Hydrostatic testing or nondestructive testing: Each pipe must undergo hydrostatic testing or other nondestructive testing methods, such as eddy current testing or radiographic testing, to verify leak tightness and weld integrity.
Dimensional and wall thickness testing.
Weld macrostructure testing: Checks weld fusion and form quality.
Intergranular corrosion testing (if required): Evaluates the material's resistance to intergranular corrosion.

 

ASTM B514 800H UNS N08800 Pipe Chemical Composition

UNS. Ni C Fe Si Mn S AI Ti Cu Cr
N08800 30-35 0.1 max 39.5 min 1.0 max 1.5 max 0.015 max 0.15-0.60 0.15-0.60 0.75 max 19-23


ASTM B514 800H UNS N08800 Tubing Mechanical Properties

UNS. Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
N08800 7.94 g/cm3 1385 °C (2525 °F)

Psi – 75,000 ,
MPa – 520

Psi – 30,000 , MPa – 205 30 %

 

Applications of ASTM B514 N08800 Nickel-Based Alloy Seamless Pipe

Petrochemical Industry: In the petrochemical industry, ASTM B514 N08800 nickel-base alloy welded pipe is widely used in high-temperature, sulfur- and hydrogen-containing environments, such as ethylene cracking furnace tubes, reforming furnace tubes, and heat exchanger tubes.
Chemical Processing: In the chemical processing industry, ASTM B514 N08800 nickel-base alloy welded pipe is used for piping and heat exchangers handling corrosive media such as acids and alkalis.
Nuclear Power Industry: In the nuclear power industry, ASTM B514 N08800 nickel-base alloy welded pipe is used as heat exchanger tubing in nuclear power plants.
Energy and Power: In the energy and power industries, ASTM B514 N08800 nickel-base alloy welded pipe is used as superheater and reheater tubes in gas turbines and boilers.
Industrial Furnace Manufacturing: ASTM B514 N08800 nickel-base alloy welded pipe is used for radiant tubes, muffle furnaces, and other applications.

Gnee Steel

 

About Gnee Steel

Gnee Steel specializes in the production and sale of various nickel-based alloys, including Nickel 201, Nickel 202, Hastelloy C-276, Hastelloy C-22, Hastelloy B, Hastelloy C-4, Inconel Alloy 600, Inconel 625, Inconel 718, Inconel X-750, Incoloy Alloy 800, Incoloy 800H/HT, Incoloy 825, Monel Alloy 400, Monel K500, and high-temperature alloys. Gnee Steel's products are widely used in aerospace, chemical, electric power, automotive, and nuclear energy applications, and we can provide customized alloy solutions tailored to customer needs. For alloy pricing inquiries or customized alloy solutions, please contact us for a quote at ss@gneemetal.com.

Send Inquiry

whatsapp

Phone

E-mail

Inquiry