
ASTM B163 UNS N04400 for high precision applications
For high-precision applications, ASTM B163 UNS N04400 (Monel 400) is favored for its excellent corrosion resistance, high strength, and toughness over a wide temperature range, including cryogenics. However, its high work-hardening rate and "stickiness" present significant machining challenges that must be addressed to maintain tight tolerances.
What is the annealing temperature for Monel 400?
1300 to 1800°F
Heating should be performed in a sulfur-free, reducing atmosphere. Annealing temperatures range from 1300 to 1800°F, but 1600 to 1800°F is most typical. Lower annealing temperatures (e.g., 1300 to 1500°F) allow for longer annealing times to minimize grain coarsening.

ASTM B163 MONEL 400 Pipe Overview
Monel 400 pipe is a nickel-copper alloy with excellent corrosion resistance in a wide range of media. Monel 400 pipe is characterized by excellent general corrosion resistance, excellent ductility, and considerable toughness. This alloy has been widely used in a variety of applications. It exhibits good resistance to fast-moving micro-water or surface water. It is particularly resistant to degassing sulfuric and hydrochloric acids. The alloy is slightly magnetic at room temperature. Monel 400 pipe is widely used in organic chemistry, crude oil, and deep-sea industries.
Monel 400 alloy pipe exhibits better corrosion resistance than commercially pure nickel (UNS N02200) under reducing conditions and better corrosion resistance than refined copper alloys under oxidizing conditions. However, Monel 400 alloy pipe is not suitable for use with strong oxidizing acids, such as nitric acid or nitrites. In such environments, high-chromium stainless steels such as UNS S44627 or 310 (UNS S31000) should be considered.
Monel 400 Pipe Characteristics
Monel 400 pipe is a corrosion-resistant alloy with excellent overall properties and a wide range of applications. It exhibits excellent corrosion resistance in hydrochloric acid and fluorine gas, as well as in hot concentrated caustic soda solutions. It is also resistant to corrosion from neutral solutions, water, seawater, air, and organic matter. A key characteristic of this alloy is its general resistance to intergranular corrosion cracking and excellent machinability.
Chemical Composition of Monel 400 Tube
| Grade | C | Mn | Si | S | Cu | Fe | Ni | Cr |
| Monel 400 | 0.30 max | 2.00 max | 0.50 max | 0.24max | 28.0-34.0 | 2.50 max | 63.00 min | – |
Physical Properties of Monel 400 Tube
| Properties | Metric | Imperial |
|---|---|---|
| Density | 8.8 gm/cm3 | 0.318 lb/in3 |
Mechnical Properties of Monel 400 Tube
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Monel 400 | 8.8 g/cm3 | 1350 °C (2460 °F) | Psi – 80,000 , MPa – 550 | Psi – 35,000 , MPa – 240 | 40 % |
Typical Precision Applications
Monel 400 alloy tubing's corrosion resistance and strength in extreme environments make it the material of choice for precision components in the following industries:
Aerospace: Precision components for fuel tanks, exhaust systems, and landing gear that must withstand extreme temperatures.
Offshore: Critical components such as pump shafts, propeller shafts, valves, and fasteners require long-term reliability in harsh seawater environments.
Chemical Processing: Precision-machined components for pumps, valves, and heat exchangers that handle a variety of corrosive chemicals, including hydrofluoric and sulfuric acids.
Oil and Gas: Seals, springs, and other precision components for process equipment in upstream, midstream, and downstream applications.
Electrical and Electronics: Components such as springs and fasteners that require low magnetic permeability and excellent corrosion resistance.

Gnee Steel specializes in the production and sale of various nickel-based alloys, including Nickel 201, Nickel 202, Hastelloy C-276, Hastelloy C-22, Hastelloy B, Hastelloy C-4, Inconel Alloy 600, Inconel 625, Inconel 718, Inconel X-750, Incoloy Alloy 800, Incoloy 800H/HT, Incoloy 825, Monel Alloy 400, Monel K500, and high-temperature alloys. Gnee Steel's products are widely used in aerospace, chemical, electric power, automotive, and nuclear energy applications, and we can provide customized alloy solutions tailored to customer needs. For alloy pricing inquiries or customized alloy solutions, please contact us for a quote at ss@gneemetal.com.





