About Stainless Steel Polishing Technology
The various surface finishing methods of stainless steel have broadened its application areas. Different surface finishing gives stainless steel unique characteristics, making it show its own advantages in application. In the field of architectural applications, the surface finishing of stainless steel is important for many reasons.


1. Basic types of surface finishing
There are roughly five types of surface finishing of stainless steel, which can be used in combination to create more final product effects. These five types include:
Rolling surface finishing
Mechanical surface finishing
Chemical surface finishing
Textured surface finishing and color surface finishing
Steps when selecting surface finishing:
Determine the required surface finishing with the manufacturer and prepare samples as production standards.
When using large areas such as composite panels, make sure to use the same batch of base coils or coils.
When selecting surface finishing, consider the manufacturing process. For example, weld grinding may require restoration of the original surface finishing.
Note that some surface finishing is directional and is called unidirectional. Making this texture vertical instead of horizontal helps reduce dirt adhesion and easy cleaning.
2. Rolling surface processing
There are three basic rolling surface processing for plates and strips:
No.1: dull and rough surface after hot rolling, annealing, pickling and descaling.
No.2D: dull surface after cold rolling, annealing, descaling, and light rolling with a rough roller.
No.2B: most commonly used in construction applications, except for the last light cold rolling with a polishing roller after annealing and descaling, the other processes are the same as 2D, the surface is slightly shiny and can be polished.
No.2B bright annealing: reflective surface, rolled with polishing rollers and finally annealed in a controlled atmosphere, maintaining a reflective surface, no oxide scale, no need for pickling and passivation.
3. Polishing surface processing
No.3: represented by 3A and 3B, the surface is uniformly ground or rough polished.
No.4: one-way surface processing, not very reflective, widely used in the construction field.
No.6: further improvement of No.4, polishing with a Tampico polishing brush in an abrasive and oil medium.
No.7: Bright polishing, polishing of fine grinding marks.
No.8: Mirror polishing, with high reflectivity, is called mirror surface processing.
4. Surface roughness
The classification of surface processing is based on the achievable roughness. The standard measurement method is CLA (centerline average), and the measuring instrument records the peak and valley changes on the surface of the steel plate. The smaller the CLA number, the smoother the surface.
5. Mechanical polishing
Note: The grinding operation is basically a polishing and cutting operation, leaving fine lines on the surface of the steel plate. The use of abrasive belts and grinding wheels made of non-stainless steel materials may cause surface contamination.
6. Electrolytic polishing
This is a metal removal process in which stainless steel acts as an anode in the electrolyte and metal is removed from the surface after power is applied. This process is often used for the processing of parts because their shapes are difficult to polish using traditional methods. The process is often used on the surface of cold-rolled steel plates because their surface is smoother than that of hot-rolled steel plates. However, electrolytic polishing makes surface impurities more obvious, especially titanium and niobium stabilized materials, which will cause differences in the weld area due to granular impurities. Small weld scars and sharp edges can be removed by this process. The process focuses on the protrusions on the surface, dissolving them first. The electrolytic polishing process is to immerse the stainless steel in a heated liquid, and the liquid ratio involves many proprietary and patented technologies. The electrolytic polishing effect of austenitic stainless steel is very good.
VII. Textured surface processing
Stainless steel can adopt many types of patterns. The advantages of adding patterns or textured surface processing to steel plates are as follows:
Reduce "oil can-ning", which is a term used to describe the surface of bright materials. This surface is not flat from an optical point of view. For example: large areas of decorative panels are difficult to make the surface completely flat even after stretching or tensioning, so metal roofing materials will wrinkle.
The textured pattern can reduce glare in the sun.
If there are slight scratches and small indentations on the patterned plate, it will not be obvious.
Increase the strength of the steel plate.
Provide architects with choices. Patented patterns include cloth patterns (used in the Ed Building in London), mosaic patterns, pearls and leather patterns. Corrugated and linear patterns can also be used. Patterned surfaces are particularly suitable for interior decoration, such as elevator panels, counters, wall panels and entrances. For exterior applications, consideration should be given to allowing the stainless steel to be cleaned by rainwater and manual washing, and to avoid dead corners where dirt and airborne impurities are easily collected to avoid corrosion that affects the appearance.
8. Rough surface processing
Commonly used for polished or bright annealed steel plates, polished with nylon abrasive belts or brushes.





