309 Series Stainless Steel Plate
309L is a variation of low-carbon 309 stainless steel used in welding applications. Lower carbon content minimizes carbide precipitation in the heat-affected zone near the weld, which can cause intergranular corrosion (weld erosion) of stainless steel in some environments.
309 series stainless steel plate
Compared with 309S, 309 does not contain sulfur S content. 309S is a sulfur-containing free-cutting stainless steel. Used for occasions with free cutting, curved surfaces and high light content


The Chinese brand of 309S is 0Cr23Ni13, American standard S30908 (American AISI, ASTM) characteristics and uses: corrosion resistance and heat resistance are better than 0Cr19Ni9
Application: furnace charge.
feature
It has good corrosion resistance and high temperature resistance, can withstand repeated heating below 980°C, and has high temperature strength and anti-oxidation and anti-carburization properties.
Surface: BA surface, 2B surface, NO.1 (white), 2D surface, NO.4 (frosted), HL (brushed), 8K surface and other surface quality, good brightness
Specifications: Thickness: 0.02mm~40mm; Width 3.5mm~1550mm
Scope of application: Mainly used in boilers, chemical industry and other industries. Petroleum, electronics, chemical industry, medicine, textile, food, machinery, construction, nuclear power, aerospace, military industry and other industries!
chemical composition
309S stainless steel GB/T1220-1992
C 0.08 or less
Mn 2.00 or less
Si 1.00 or less
P≤0.045
S 0.030 or less
Ni visual acuity of 12.0 to 15.0
Cr 22.0 24.0 or less
Mechanical behavior
Yield strength/MPa: ≥205
Tensile strength/MPa: ≥515
Elongation/%: ≥40
Sectional shrinkage/%: ≥50





