Differences between Inconel 601 Alloy Plate and Inconel 625 Plate
Inconel 601 plate and Inconel 625 alloy plate are both nickel-chromium alloys that have excellent high-temperature properties, but they have different chemical compositions, so each has advantages and disadvantages. Inconel 601 alloy plate is known for its excellent oxidation resistance, especially at high temperatures, while Inconel 625 plate has excellent strength, weldability, and corrosion resistance, especially in chloride-containing environments.
What are the advantages of Inconel 625 plate?
In addition to high tensile strength, INCONEL 625 alloy plate also has high creep strength, high rupture strength and excellent weldability. These properties make it also suitable for aerospace applications, including duct and exhaust systems, turbine shrouds and seals, and thrust reverser systems.
Inconel 601 Alloy Plate Vs Inconel 625 Plate
| Inconel 625 plate Specification: |
| Alloy 625 Plate Specification | ASTM B443 UNS N06625, ASME SB443 |
|---|---|
| Inconel 625 Plate Sizes | 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm |
| Inconel 625 Plate Thickness | 0.1mm to 100 mm Thk |
| Inconel 625 Plate Width | 10-2500mm |
| Inconel 625 Plate Length | 2m, 2.44m, 3m, or as required |
| Inconel 625 Sheet ASTM | ASTM B443 |
| Inconel 625 Sheet AMS | AMS 5599 |
| Inconel 625 Plate Finish | Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated) |
| Inconel 625 Sheet Hardness | Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc. |
| Inconel 625 Plate Stock in form of | Alloy 600 Plate, Sheet, Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Clad Plate, Rolling Sheet, Flat Sheet, Rolling Plate, Flat Shim, Blank (Circle), hot rolled, cold rolled, annealed, soft annealed, descaled, sheared, tread plate, Checker Plate |
| Material | JIS: N0, N2, N1, NW2200, NW2201, NW4400, NW5500, NW6002, etc DIN:H-Ni99.96, H-Ni99.95, H-Ni99.92, H-Ni99.90, H-Ni99.5, H-Ni99, etc |
| Inconel 625 Plate ASTM Standard | ASTM A162, GB/T2054, DIN177502002, ASTM B127, ASTM B435, ASTM B582, ASTM B575, ASTM B168, ASTM B443, ASTM B463, ASTM B626, ASTM B536, etc |
| Inconel 625 Plate Dimensions | As the customer required |
Inconel 601 Sheets and Plates Specification
Specifications :ASTM B168 / ASME SB168, AMS 5870
Width : 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc
Length : 2000mm, 2440mm, 3000mm, 5800mm, 6010mm, etc
Thickness : 0.3 mm to 120 mm
Hardness : Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.
Finish : Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Form : Plain Sheet, Shim Sheet, Strip, Flats, Blank (Circle), Ring (Flange)
Inconel UNS N06601 Mechanical Characteristics
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Inconel 601 | 8.1 g/cm3 | 1411 °C (2571 °F) | Psi – 80,000 , MPa – 550 | Psi – 30,000 , MPa – 205 | 30 % |
Nickel 601 plate Chemical Formula
| Grade | C | Mn | Si | S | Cu | Fe | Ni | Cr |
| Inconel 601 | 0.10 max | 1.00 max | 0.50 max | 0.015max | 1.00 max | Balance | 58.0 – 63.0 | 21.0 – 25.0 |
Chemical Composition of Inconel Alloy 625 Sheet & Plate
| Grade | C | Mn | Si | S | Cu | Fe | Ni | Cr |
| Inconel 625 | 0.10 max | 0.50 max | 0.50 max | 0.015 max | - | 5.0 max | 58.0 min | 20 - 23 |
Mechanical Properties of Inconel 625 Sheet & Plates
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 8.4 g/cm3 | 1350 °C (2460 °F) | Psi – 1,35,000 , MPa – 930 | Psi – 75,000 , MPa – 517 | 42.5 % |
Gnee Steel is a supplier of Inconel 601 Alloy Plate And Inconel 625 Plate, covering tubes: Seamless tubes: Size: 4 - 219 mm; Thickness: 0.5 - 20 mm; Welded tubes: Size: 5.0 - 1219.2 mm; Thickness: 0.5 - 20 mm, Plates: Plate thickness 0.1 to 100 mm; Plate width 10-2500 mm, Strips, Alloy round bar sizes: diameter 3-800 mm;, Flat bar sizes: thickness 2-100 mm; Width: 10-500 mm, Hexagonal bar sizes: 2-100 mm;, Wires and extruded profiles. We work with steel mills to provide customers with 625 alloy that meets or exceeds many leading industry standards, including ASTM, ASME, SAE, AMS, ISO, DIN, EN and BS standards.
Gnee Steel stocks and sells Inconel 601 Alloy Plate And Inconel 625 Plate, pipes, tubes, plates, strips, sheets, round bars, flat bars, forged billets, hexagons, wires and extruded profiles. You are welcome to contact us for a quote at any time at ss@gneesteel.com
