Jul 16, 2025 Leave a message

Inconel 718 Pipe Advantages and Specifications

 
Inconel 718 Pipe

Inconel 718 Pipe Advantages and Specifications

Inconel 718 Tube exhibits excellent creep-rupture and yield-tensile properties at temperatures up to 1300 degrees Fahrenheit (about 737 degrees Celsius) and resists oxidation at temperatures up to 1800 degrees Fahrenheit (about 827 degrees Celsius). Inconel 718 Tube is widely used in high-strength applications such as jet engine components, such as buckets, hubs, gaskets, and high-temperature bolts and fasteners.

What are the advantages of INCONEL 718 pipe?

Inconel 718 alloy pipe is a high-strength, corrosion-resistant nickel-based high-temperature alloy. It has excellent mechanical properties, high-temperature strength, and resistance to oxidation and corrosion. Inconel 718 pipe is widely used in various industries such as aerospace, oil and gas, automotive, and power generation.

Inconel 718 Pipe Advantages and Specifications
Inconel 718 Tubes

What are Inconel 718 Tubes used for?

Inconel 718 alloy tubes are commonly used in the aerospace industry. Engineers are constantly looking to improve the reliability and efficiency of engines, not to mention extend their service life. High temperature alloys, especially 718 alloy tubes, are widely chosen for their balance between cost and performance.

What are the properties of INCONEL 718 alloy pipe?

Inconel 718 pipe is a high-strength, corrosion-resistant nickel-chromium alloy with an operating temperature range of -253℃ to ~705℃. It is widely used in gas turbines, rocket engines, spacecraft, nuclear reactors, pumps and tools, etc.

Advantages of Inconel 718 Tubes

These tubes have strong creep rupture properties, very high yield strength, and high tensile strength. Nickel is the main component of Inconel 718 tubes. These tubes are suitable for applications that require extremely high yield strength, tensile strength, and strong creep rupture properties.

 

Inconel 718 tubes have excellent resistance to chloride, high temperature, and sulfide stress corrosion cracking, so they are not affected. Tubes made of Inconel 718 will not corrode in water and will not crack even when attacked by chloride ions.

 

Due to its delayed response characteristics, the alloy can be aged during annealing without cracking. In addition to excellent welding properties, the material is also effective in preventing cracking after welding.

 

In addition to increasing the stiffness of the alloy, molybdenum also provides high strength without the need for heat treatment strengthening. The addition of aluminum and titanium to nickel-chromium alloys can increase the toughness of the alloy.

What are the specifications of these Inconel 718 tubes?

Inconel 718 pipes comply with various standards such as ASTM B163/ ASME SB163, ASTM B516/ ASME SB516.

 

The outer diameter of seamless pipes ranges from 3.35 mm to 101.6 mm, while the outer diameter of welded pipes ranges from 6.35 mm to 152 mm.

 

These pipes are available in various types such as polished pipes, annealed pickled pipes, bright annealed pipes, and MF pipes.

 

The types of pipe alloys include seamless pipes, EFW pipes, EFW pipes, welded pipes, and fabricated pipes in various shapes such as U-bends, hollow pipes, hydraulic pipes, LSAW pipes, boiler pipes, straight pipes, coils, round, rectangular, square, etc.

Gnee Steel

 

About Gnee Steel

Gnee Steel is a supplier of Inconel 718 Pipe, covering pipes: Seamless pipes: Size: 4 - 219 mm; Thickness: 0.5 - 20 mm; Welded pipes: Size: 5.0 - 1219.2 mm; Thickness: 0.5 - 20 mm, Plates: Plate thickness 0.1 to 100 mm; Plate width 10-2500 mm, Strips, Alloy round bar sizes: diameter 3-800 mm;, Flat bar sizes: thickness 2-100 mm; Width: 10-500 mm, Hexagonal bar sizes: 2-100 mm;, Wire and extruded profiles. We work with steel mills to provide customers with 625 alloy, and its products meet or exceed many leading industry standards, including ASTM, ASME, SAE, AMS, ISO, DIN, EN and BS standards.
Gnee Steel stocks and sells Inconel 718 Pipe, Tube, Pipes, Plates, Strips, Plates, Round Bars, Flat Bars, Forged Billets, Hexagons, Wires and Extruded Profiles. Feel free to contact us for a quote at ss@gneesteel.com

Send Inquiry

whatsapp

Phone

E-mail

Inquiry