| Material Code | Material Description | QTY |
| 7209077 |
PIPE, SPECIAL PURPOSE: MATERIAL INCOLOY 800HT/ASTM A358, SIZE OD 20 IN, TYPE SMLS , APPLICATION RADIANT COIL , ENDS BW BEVELLED, FFT: WALL THK: 5/8 IN; STRAIGHT, PIPE TO BE HYDROTESTED AT 660PSIG PRIOR TO EXTRUDING OUTLETS. MANIFOLD IS TO BE HEAT TREATED AT 2150 DEG F AFTER EXTRUDING. EXTERIOR SURFACE IS TO BE COATED WITH CORTEC VCI-368 BEVELED ENDS ARE TO BE PROTECTED WITH PLASTIC CAPS. EXTRUDED OUTLETS ARE TO BE DYE PENETRANT EXAMINED NO CRACKS ARE ALLOWED. OUTLETS ARE TO BE EXTRUDED COLD USING MALE/FEMALE DIES. ALL LONG SEAMS AND GIRTH SEAMS ARE TO BE 100% RT EXAMINED (ACCEPTANCE STANDARD ANSI B31.3), Mnfr: SEALWELD CORPORATION Mnfr Part No: UNK, Drawing LH 1151-E6 Rev: 09 Item No: ITEM NO. 1, MTC IS REQUIRED PRIOR TO BIDDING PROCESS AND ALONG WITH DELIVERY |
1 |
| 494969 |
PIPE: SIZE OD 168.3 MM, LENGTH 13.9 M, MATERIAL SB407UNS, FFT: FOR HTC-II, CONVECTION COIL, Mnfr: KINETICS TECHNOLOGY INT'L.BV [KTI] P/N: 101SP |
1 |
| 7346097 | PIPE, SPECIAL PURPOSE; MATERIAL: INCOLOY 800H, WALL THICKNESS: 18.36MM, SIZE: 6 IN, TYPE: N/A, ENDS: BEVELLED, APPLICATION: REFORMERFURNACE, STANDARD: ASTM B407-UNS NO8811; FFT: SOLUTION ANEALING IS REQUIRED FOR PIPE. MANUFACTURER MUST BE APPROVED BY SABIC; TESTCERTIFICATE COMMENTS: VENDOR TO SUBMIT MATERIAL TEST CERTIFICATE | 860 |
| 7048178 |
TEE, PIPE REDUCER: SIZE 1 X 1 X 3/4 IN, CONNECTION BW, MATERIAL MONEL 400 ASTM B366, RATING SCH 80S, GRADE WPNC OR WPNC-W, STANDARD ANSI B16.9; ANSI B36.19, FFT: SEAMLESS OR WELDED; MADE FROM PIPE TO ASTM B 165 UNS N04400, ANNEALED OR PLATE TO ASTM B 127 UNS N04400; MANUFACTURER CERTIFICATE IS REQUIRED |
750 |
| 7025748 |
FITTING, OUTLET: TYPE WELDOLET, RUN SIZE 1 IN, BRANCH SIZE 6 X 10 IN, BRANCH CONNECTION BW, RATING SCH 40S, MATERIAL NICKEL ASTM B366 GR WPN, GRADE WPN, STANDARD ANSI B36.10, FFT: SEAMLESS; MANUFACTURERS CERTIFICATION IS REQUIRED |
960 |
| 7012835 | COUPLING, PIPE HALF; SIZE: 3/4 X 1/2 IN, CONNECTION: SW X THD,MATERIAL: MONEL ASTM B564, RATING: 6000 LB; FFT: SEAMLESS; DRILLED ANDTAPPED; DRAWING: 00S5CPLG1 | 1200 |
| 7314640 |
BAR, ROUND: SIZE 1.5 M, LENGTH 2 M, MATERIAL ASTM A 312, GRADE C 276, PROCESS COLD ROLLING, STANDARD AS APPLICABLE ,TEST CERTIFICATE COMMENTS: MTC REQUIRED |
1500 |
| 7093123 |
BAR, ROUND: SIZE OD 1-1/4 IN, LENGTH 300 MM, MATERIAL MONEL 400, GRADE UNS 4400, PROCESS HOT ROLLED ANNEALED, FFT: HOLLOW TYPE, OUTSIDE DIA:32MM (1.1/4"), INSIDE CENTER THROUGH HOLE WITH 6MM DIA, TOTAL LENGTH IS REQUIRED 12 INCH (or 300MM), Tag/Equip No: 26AY1293/1010 |
1500 |
| 7353014 | PIPE, METALLIC; NOMINAL PIPE SIZE DESIGNATION: 1-1/2 IN, SCHEDULE:10S, WALL THICKNESS: 0.375 IN, LENGTH: 6 M, PROCESS: ELECTRIC FUSIONWELDING, END TYPE: BEVEL (ASME B16.25), MATERIAL GRADE: HASTELLOY CASTM B619 CL.1 (N10276); REFERENCE: PF -1S-B619-BE; DRAWING: ISOMETRIC; TEST CERTIFICATE COMMENTS: MTC IS REQUIRED | 1300 |
| 7345841 | PLUG, TUBE; MATERIAL: HASTELLOY C276 , DIAMETER: ID 13.9 X OD 16.8MM, LENGTH: 53.1 MM; FFT: FOR TUBE OD : 19.05 MM THICKNESS : 1.65MM | 1200 |
| 0171469 | ELBOW, PIPE; SIZE: 450 MM, CONNECTION: BW, DEGREE: 90, MATERIAL:MONEL 400 ASTM B366, RADIUS: LONG, GRADE: WPNC/WPNC-W, SCHEDULE: 10S,WALL THICKNESS: 4.77 MM, STRUCTURE: SEAMLESS, STANDARD: ANSI B 16.9 ,ANSI B 36.19; FFT: ANNEALED OR PLATE TO ASTM B 127 UNS N04400, CENTERTO END: 685.8 MM, MANUFACTURER'S CERTIFICATE IS REQUIRED, WELDED;INSPECTION REQUIREMENT: NOTE TO SABIC WAREHOUSE (RECEIVING AREA)-TEST ALLOY (PMI) AND MARKING SHALL BE APPLIED | 950 |
| 1683642 | TUBE, METALLIC; MATERIAL: ALLOY 20 CR 32 NI NB, OUTSIDE DIAMETER: 266MM, WALL THICKNESS: 16 (MSW) MM, LENGTH: 2670 MM, STRUCTURE:CENTRICAST; FFT: WELDED ASSEMBLY COMPRISING CENTRICAST TUBE (POS: 1C, QTY: 1), CENTRICAST END CAP (20 CR 32 NI NB, POS: 3C, QTY: 1) ANDNOZZLE FOR HAIRPIN TUBE ON MAIN TUBE (ALLOY 800 HT, POS: 4C, QTY:11); OEM: SCHMIDT & CLEMENS; DRAWING: 3804 U340-E25310, REV: 5, MNFR DRG: CA-914-1, POS: 1C, 3C, 4C; TEST CERTIFICATE COMMENTS:INSPECTION REPORT, MTC | 860 |
| 651179 |
BAR, ROUND: SIZE 3 MM, LENGTH 6 M, MATERIAL INCONEL 600, STANDARD ASME SB-166; UNS N06600, FFT: TYPE: SOLID; REQUIRED FOR 21-H-101, MATERIAL TEST CERTIFICATES REQUIRED FOR CHEMICAL & PHYSICAL ANALYSIS (LENGTH VARIATION IS ACCEPTABLE). |
860 |
| 7260447 |
FITTING: TYPE LAP JOINT STUB END, SIZE DIA 2 X LG 2-1/2 IN, MATERIAL NICKEL ASTM B366 WPN OR WPNW, STANDARD ANSI B16.9/ANSI B16.5/ANSI B36.10/B36.19/MSS SP43, APPLICATION NOZZLE OF 3RD EFF VAPOR BODY, FFT:SEAMLESS OR WELDED; SERRATED SPIRAL FINISH; BUTT-WELDING; MADE FROM PIPE TO ASTM B 161, ANNEALED; WITH GASKET CONTACT SURFACE; SCH 160, INSPECTION REQUIREMENT: NOTE TO SABIC WAREHOUSE (RECEIVING AREA)-TEST ALLOY (PMI) AND MARKING SHALL BE APPLIED., TEST CERTIFICATE COMMENTS: MANUFACTURERS CERTIFICATE AND PMI TEST REPORT IS REQUIRE ALONG WITH DELIVERY |
860 |
