Jan 14, 2026 Leave a message

Nickel 200 Pipe: Standards, Testing and Applications

What Is Nickel 200 Pipe?

Nickel 200 (UNS N02200) pipe is a tubular product manufactured from commercially pure wrought nickel with 99.0% minimum nickel content and tightly controlled impurities. It offers exceptional corrosion resistance in caustic alkalis and reducing chemicals, high thermal and electrical conductivity, good ductility and toughness at cryogenic temperatures, and a ferromagnetic structure. Its key limitation is carbon content, permitted up to 0.15%: after prolonged exposure at 315–650°C (600–1200°F), carbon can precipitate as graphite at grain boundaries and embrittle the material. Nickel 200 pipe is therefore not recommended for continuous service above 315°C (600°F); for higher temperatures, Nickel 201 (UNS N02201) with 0.02% maximum carbon must be specified.

Key Applications

Nickel 200 pipe is the standard material in several critical industries. The most significant application is caustic soda (NaOH) processing: the alloy resists all concentrations of sodium hydroxide up to its service limit and is used in transfer lines, evaporator circuits, and chlor-alkali plant equipment. In food and pharmaceutical processing, its non-contaminating properties and resistance to fatty acids and organic compounds support FDA material-contact requirements for edible oils, additives, and pharmaceutical intermediates. Alkaline battery manufacturing uses Nickel 200 pipe to handle potassium hydroxide electrolytes without metallic contamination, and organic synthesis processes such as fluorination, hydrogenation, and isomerization specify it where its corrosion performance exceeds stainless steel.

Welding and Fabrication

Fabrication of Nickel 200 pipe requires nickel-specific procedures. Matching filler metals such as ERNi-1 (AWS A5.14) are standard, and nickel-manganese fillers such as ERNi-3 may be used for improved ductility in restrained joints. Cleanliness is paramount: surfaces must be free of sulfur, lead, oils, and other contaminants that cause embrittlement, and dedicated stainless steel brushes should be used. Low heat input processes such as GTAW (TIG) are preferred, using stringer beads and interpass temperatures below 150°C (300°F) to limit grain growth and carbide precipitation, with argon back purging to protect the weld root from oxidation. Stress relief at 590–620°C (1100–1150°F) may be specified for severe corrosive service. The material work-hardens rapidly, so forming, bending, and machining need proper tooling, sulfur-free lubricants, and intermediate annealing where deformation is heavy.

Seamless vs Welded Construction

Seamless pipe per ASTM B161/ASME SB161 is produced from solid billets, giving a homogeneous cross-section with no longitudinal weld seam; it is preferred for high-pressure, critical, and small-diameter services and is generally more expensive. Welded pipe per ASTM B725/ASME SB725 is formed from plate or strip, is more economical for large diameters and thin walls, and is available in longer lengths; its weld seam is examined by radiography or other NDE as required by the specification or purchase order. Selection considers pressure rating, service criticality, diameter and wall thickness, corrosion exposure, and budget, with both forms meeting the same UNS N02200 chemical and mechanical requirements.

Quality Standards, Testing, and Documentation

Nickel 200 pipe is governed by ASTM B161 (seamless pipe and tube), ASTM B725 (welded pipe), and ASTM B829 (general requirements for nickel and nickel-alloy pipe). Mandatory verification includes chemical analysis per heat or lot, tensile testing for yield, tensile strength, and elongation, and hydrostatic or pneumatic pressure testing of every pipe, with eddy current or ultrasonic examination often specified for seamless pipe and radiography for welded seams. Deliverables include mill test certificates with full heat traceability and actual test results, material test reports for code applications such as ASME or API, and, where relevant, industry-specific certification such as ASME Section III documentation for nuclear service or FDA compliance certificates for pharmaceutical contact. Where sour-service conditions apply, NACE MR0175/ISO 15156 requirements should be reviewed, although Nickel 200 is not a typical sour-service material.

FAQ

What is Nickel 200 pipe?

Nickel 200 (UNS N02200) pipe is a tubular product of commercially pure wrought nickel, 99.0% minimum nickel, specified to ASTM B161 for seamless and ASTM B725 for welded pipe.

What temperature limit applies to Nickel 200 pipe?

Continuous service is limited to about 315°C (600°F) because carbon can cause graphitization embrittlement at 315–650°C; Nickel 201 is used above this limit.

What filler metal is used to weld Nickel 200?

ERNi-1 (AWS A5.14) is the standard matching filler, with ERNi-3 nickel-manganese filler used where improved ductility is needed.

Seamless or welded Nickel 200 pipe?

Seamless (ASTM B161) is preferred for high-pressure and critical service; welded (ASTM B725) is more economical for large diameters and moderate duty.

What tests are required for Nickel 200 pipe?

Chemical analysis, tensile testing, hydrostatic or pneumatic pressure testing, and non-destructive examination such as eddy current, ultrasonic, or radiography as specified.

Is Nickel 200 magnetic?

Yes. Nickel 200 is ferromagnetic, with a Curie temperature of about 350°C, which is relevant for applications where magnetic response matters.

Send Inquiry

whatsapp

Phone

E-mail

Inquiry