Jan 14, 2026 Leave a message

Execution standards for 6 inconel

1.ASTM Standards (USA)

ASTM B168

Standard specification for nickel-chromium-iron alloys (UNS N06600, N06601, N06690, N06025, N06045) plate, sheet, and strip.

Covers Inconel 601 plates, sheets, and strips.ASTM B166

Standard specification for nickel-chromium-iron alloys (UNS N06600, N06601, N06690, N06025, N06045) seamless pipe and tube.

Covers Inconel 601 seamless pipes and tubes.ASTM B167

Standard specification for nickel-chromium-iron alloys (UNS N06600, N06601, N06690, N06025, N06045) wire.

Covers Inconel 601 wire products.ASTM B564

Standard specification for nickel alloy forgings.

Covers Inconel 601 forged bars, forgings, and forging stock.ASTM B163 (historical relevance)

Older specification for nickel and nickel alloy seamless condenser and heat exchanger tubes, which has been largely replaced by B166 but is still referenced in some industry documents.

2.UNS Number (Unified Numbering System)

UNS N06601

The unified designation for Inconel 601 in North America, used across ASTM, SAE, and other standards.

3.EN / European Standards

EN 10095

European standard for heat-resisting steels and nickel alloys for general purposes.

Inconel 601 is often referred to by its X15CrNiSi25-20 designation in some European documents, although this is more of a stainless steel grade with similar Cr/Ni content and is sometimes used as a reference for heat-resistant applications.

Note: EN standards do not always directly mirror the Inconel 601 alloy, and UNS N06601 is still the primary reference in many European supply contracts.

EN 10269

Specification for nickel and nickel alloy bars, rods, and wires for general engineering purposes, which can be used to cover Inconel 601 bar and wire products in some cases.

info-348-347info-353-350

info-353-350info-352-351

EN 10216-5

Specification for seamless steel tubes for pressure purposes – Part 5: Nickel alloy tubes, which can be applied to Inconel 601 seamless tubes when ordered with the appropriate UNS number.

4.Other International Standards

ISO 6208

Specification for nickel-chromium-iron alloys (Ni-Cr-Fe) plate, sheet, and strip, which is equivalent to ASTM B168 in many respects and can be used for Inconel 601 plate/sheet/strip.

ISO 9723 / ISO 9724 / ISO 9725

Series of standards for nickel and nickel alloy bars, rods, and wires, which can be referenced for Inconel 601 bar and wire products.JIS Standards (Japan)

Inconel 601 is sometimes supplied under JIS NCF601 (nickel-chromium-iron heat-resisting alloy) in the Japanese market, although ASTM/UNS designations are also widely used.

 

Send Inquiry

whatsapp

Phone

E-mail

Inquiry