Mar 13, 2025 Leave a message

astm-b444-(1)-(1).pdf

Inconel 600 vs Inconel 625: Composition and Uses

Inconel 600 vs Inconel 625: Composition

Inconel 600 is mainly composed of nickel and chromium, with a nickel content of about 72% and a chromium content of about 14-17%. It also contains small amounts of iron, copper, manganese, silicon, carbon and sulfur.

Inconel 625 is a low-carbon nickel-chromium-molybdenum-niobium alloy with a nickel content of about 58%, chromium of about 20-23%, molybdenum of about 8-10% and niobium of about 3.15-4.15%, plus small amounts of iron, silicon, manganese, carbon, phosphorus, sulfur, titanium and aluminum.

The molybdenum and niobium additions in 625 are the decisive difference: they provide solid-solution strengthening and give the alloy its outstanding resistance to pitting, crevice corrosion and chloride attack, which 600 cannot match in aggressive media.

Corrosion Resistance Compared

Inconel 600 has very good corrosion resistance to general corrosive media, but its resistance in nitric acid and chloride media is relatively poor, and it can suffer intergranular attack after sensitization in certain conditions.

Inconel 625 has excellent corrosion resistance, especially in seawater, acidic environments, alkaline solutions and chloride media. It also resists stress corrosion cracking and chloride-ion stress corrosion cracking, which makes it the more durable choice wherever pitting or chloride cracking is a risk.

Oxidation Resistance and High-Temperature Performance

Inconel 600 has relatively good oxidation resistance but can suffer oxidation at very high temperatures, and although its melting range is about 1354-1413 degrees Celsius, its strength and toughness decrease at elevated temperature more quickly than the 625 type.

Inconel 625 has excellent oxidation resistance at high temperatures and maintains good stability in high-temperature environments up to about 1000 degrees Celsius; its melting range is about 1290-1350 degrees Celsius. For continuous service, a practical design limit around 982 degrees Celsius is commonly used, with short-term excursions possible at higher temperatures depending on stress and atmosphere.

Application Fields

Inconel 600, with its good corrosion resistance and stability, is mainly used in high-temperature chemical reaction equipment, furnaces, furnace tubes and heat exchangers, and is widely used in the chemical industry, nuclear energy and aerospace, including nuclear reactor components and heat-treatment fixtures.

Inconel 625, with its excellent corrosion resistance and high-temperature performance, is widely used in aerospace, chemical processing, marine engineering and the nuclear industry, for example in oil extraction equipment, petrochemical equipment, seawater piping, flue gas desulfurization components and nuclear reactor internals.

Heat Treatment Methods

Inconel 600 is often treated with solution treatment, annealing and stress-relief cycles to eliminate internal stress and improve plasticity, machinability and stability, with a typical anneal around 925-980 degrees Celsius followed by air cooling or quenching.

Inconel 625 also has a variety of heat treatments, including high-temperature solution annealing, low-temperature solution annealing and stress relief, which optimize the microstructure and improve mechanical properties and corrosion resistance for high-temperature environments. The standard anneal for 625 is around 871-982 degrees Celsius with rapid cooling.

FAQ

What is the main difference between Inconel 600 and Inconel 625?

The main difference is composition: 600 is a simple nickel-chromium-iron alloy with about 72% nickel, while 625 adds molybdenum and niobium for far stronger resistance to pitting, acids and chloride stress corrosion cracking, at a higher cost.

Which Inconel is better for seawater?

Inconel 625. Its molybdenum content provides excellent resistance to pitting and crevice corrosion in seawater, while Inconel 600 can suffer localized attack in chloride-rich marine environments.

Is Inconel 600 resistant to nitric acid?

Relatively poor. Inconel 600 has limited resistance to nitric acid, while 625 handles many acids better; for strongly oxidizing acid service, other grades or high-chromium alloys may be needed.

Can Inconel 600 and 625 be used in nuclear reactors?

Yes, both have nuclear service history: 600 in steam generator tubing and reactor components, and 625 in reactor internals and fasteners, although alloy selection must follow the applicable nuclear specifications and water chemistry requirements.

Why is Inconel 625 more expensive than Inconel 600?

625 contains costly molybdenum and niobium additions and tighter impurity control, and its higher strength and corrosion resistance justify the premium in demanding marine, chemical and aerospace service.

What is the melting range of Inconel 625?

The melting range of Inconel 625 is approximately 1290-1350 degrees Celsius, while Inconel 600 melts at approximately 1354-1413 degrees Celsius.

Send Inquiry

whatsapp

Phone

E-mail

Inquiry