Inconel 718 threaded rod
Gnee Steel
Information about Inconel 718 threaded rod
Inconel 718 threaded rod is a fastener made from a nickel-chromium superalloy known for its exceptional high-temperature strength, creep resistance, and corrosion resistance. This age-hardenable alloy, containing iron, molybdenum, niobium, aluminum, and titanium, maintains its properties under extreme conditions, from cryogenic temperatures to approximately 1300°F (700°C), making it ideal for demanding applications in industries such as aerospace, power generation, and oil and gas.
Gnee Steel
What are the properties of Inconel 718 alloy rod?
Inconel 718 alloy rod is a high-strength, corrosion-resistant nickel-based superalloy. It offers excellent mechanical properties, high-temperature strength, and resistance to oxidation and corrosion. Inconel 718 alloy is widely used in a variety of industries, including aerospace, oil and gas, automotive, and power generation.
Gnee Steel offers customers a wide range of threaded rod qualities. Inconel 718 threaded rod is one of our most popular rod grades. We offer threaded rod in a variety of sizes and finishes. We utilize high-quality raw materials from reputable global sources. Inconel 718 threaded rod is manufactured from a chromium, nickel, and molybdenum alloy. Inconel 718 is a nickel-based high-temperature alloy ideal for high-strength applications from cryogenic temperatures up to 1400°F. Inconel 718 is also strong and impact-resistant. Precipitation heat treatment significantly increases the ambient temperature toughness of Inconel 718 alloy threaded rod. These bolts are a high-strength, nickel-chromium-based high-temperature alloy, making them resistant to oxidation, strong compression, and temperatures up to 700°C.
UNS N07718 Full Threaded Rod specifications and material grades
Dimension : ASTM B637, ASTM B637
Standard : ASTM, DIN, BS, GB, IS and all International Standards
Size : M6 to M52 & 1/4″ to 2″
Length : 1000mm to 3000mm & 1feet to 12feet
Standard : DIN975
Materials / Grades : Inconel 718
Finish : Zinc Plated, Plain, Hot Dip Galv. & Yellow Zincs
Nickel 718 Threaded Bars CHEMICAL COMPOSITION
| Grade | Ni | Cr | Cu | C | Mn | S | Mo | Si | Co |
| Inconel 718 | 50 – 55 | 17 – 21 | 0.3 max | 0.08 max | 0.35 max | 0.015 max | 2.8 – 3.3 | 0.35 max | 1.0 max |
Alloy 718 Threaded Bars MECHANICAL PROPERTIES
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 8.2 g/cm3 | 1350 °C (2460 °F) | Psi – 135,000 , MPa – 930 | Psi – 70,000 , MPa – 482 | 45 % |
Inconel 718 Fully Threaded SIZES
| Type | SIZES (mm) | SIZES (Inches) | ISO Tolerance |
|---|---|---|---|
| Cold Drawn and Ground | 10.00 – 75.00 | 5/6″ – 2.50″ | h8-h9-h10-h11 |
| Cold Drawn and Polish | 3.00 – 75.00 | 1/8″ – 3.00″ | h8-h9-h10-h11 |
| Peeled and Polished | 40.00 – 150.00 | 1.50″ – 6.00″ | h11, h11-DIN 1013 |
| Peeled and Ground | 20.00 – 50.00 | 3/4″ – 2.00″ | h9-h10-h11 |
Inconel 718 Threaded Bars Standard lengths of 2000 mm up to 6000 mm. Cut to size on request (tolerance +2/-0 mm).
| 5.0 | 45.0 |
| 6.0 | 50.0 |
| 7.0 | 55.0 |
| 8.0 | 60.0 |
| 9.0 | 65.0 |
| 10.0 | 70.0 |
| 12.0 | 75.0 |
| 16.0 | 80.0 |
| 20.0 | 90.0 |
| 25.0 | 100.0 |
| 30.0 | 130.0 |
| 35.0 | 160.0 |
| 40.0 | 200.0 |
Gnee Steel Various Types of ASTM B637 718 Inconel Stud With Nuts
Inconel 718 studs with nuts
Inconel 718 Stud With Nut Supplier
Inconel 718 Stud With Nuts Manufacturer
Inconel 718 Stud With Nut Stockist
2.4668 Stud With Nuts
Nickel Alloy 718 Stud With Nut
Inconel 718 Stud With Nuts Exporter
UNS N07718 Stud With Nut
718 Stud With Nuts
Inconel 718 Stud With Nut
ASTM B637 718 Inconel Stud With Nuts
Inconel 718 threaded studs
Inconel 718 Threaded Stud Supplier
Inconel 718 Threaded Studs Manufacturer
Inconel 718 Threaded Stud Stockist
2.4668 Threaded Studs
Nickel Alloy 718 Threaded Stud
Inconel 718 Threaded Studs Exporter
UNS N07718 Threaded Stud
718 Threaded Studs
Inconel 718 Threaded Stud
ASTM B637 718 Inconel Threaded Studs
Inconel 718 Fully Threaded Rod
Inconel 718 Full Threaded Rod Supplier
Inconel 718 Full Threaded Rods Manufacturer
Inconel 718 Full Threaded Rod Stockist
2.4668 Full Threaded Rods
Nickel Alloy 718 Full Threaded Rod
Inconel 718 Full Threaded Rods Exporter
UNS N07718 Full Threaded Rod
718 Full Threaded Rods
Inconel 718 Full Threaded Rod
ASTM B637 718 Inconel Full Threaded Rods
Inconel 718 threaded rods available from stock
| Category | Product Name |
|---|---|
| General Product Names | ASTM B637 Alloy 718 Threaded Bars Inconel 718 Industrial Threaded Rods Alloy 718 Full Threaded Bars Inconel 2.4668 Threaded Rod |
| Specific Product Types | 718 Inconel Threaded Tie Rods Inconel 718 Half Threaded Bar Inconel 718 Stud with Nuts Alloy 718 Threaded Stud Inconel Alloy 718 Threaded Tie Rods Inconel 718 Industrial Threaded Studs |
| Standards & Certifications | ASME SB637 Inconel 718 Threaded Rod ASTM B637 Alloy 718 Threaded Bars |
| Supply Chain Roles | Inconel 718 Half Threaded Bar Manufacturer 718 Inconel Threaded Bars Stock At Best Price Inconel 718 Stud with Nuts Stockist Alloy 718 Threaded Stud Manufacturer |
| Material Specifications | Inconel UNS N07718 Stud with Nuts Inconel Alloy 718 Threaded Tie Rods |
About Gnee Steel
in one-stop service
Gnee Steel is a supplier of Inconel 718 threaded rod. Our product offerings include seamless tubes (sizes: 4-219 mm, thickness: 0.5-20 mm); welded tubes (sizes: 5.0-1219.2 mm, thickness: 0.5-20 mm); plates (sizes: 0.1-100 mm, width: 10-2500 mm); strip; alloy round bars (sizes: 3-800 mm, diameter); flat bars (sizes: 2-100 mm, thickness: 10-500 mm); hexagonal bars (sizes: 2-100 mm); wire rod; and extruded sections. We partner with steel mills to provide our customers with 625 alloy that meets or exceeds numerous leading industry standards, including ASTM, ASME, SAE, AMS, ISO, DIN, EN, and BS.
Gnee Steel stocks and sells Inconel 718 Threaded Rod, Tube, Pipe, Plate, Strip, Plate, Round Bar, Flat Bar, Forged Billet, Hexagon, Wire and Extruded Sections. Feel free to contact us for a quote at ss@gneemetal.com
