Jan 06, 2026 Leave a message

Datasheet-For-Inconel-601-1-6-(1)-(1).pdf

Inconel 601 VS Inconel 718

 
Inconel 601 VS Inconel 718
 
Inconel 601 VS Inconel 718

Inconel 601 VS Inconel 718

Inconel 601 exhibits excellent oxidation resistance and heat treatment properties, making it an ideal material for manufacturing furnace components; while Inconel 718, through precipitation hardening, possesses superior strength and creep resistance, making it the preferred material for high-stress aerospace/turbine components. The aluminum content in 601 enhances its high-temperature corrosion resistance, while the nickel-chromium-molybdenum-niobium structure of 718 allows it to maintain excellent mechanical properties even at extreme temperatures.

What is the melting point of Inconel 718?

The melting point range of Inconel 718 is approximately 1260°C to 1336°C (2300°F to 2437°F). Its solidus temperature (start of melting) is 1260°C (2300°F), and its liquidus temperature (complete liquefaction) is 1336°C (2437°F). It is a high-temperature alloy known for its exceptional strength and corrosion resistance in demanding applications such as aerospace and oil/gas industries.

Inconel 718
 

Inconel 601 is a nickel-chromium-iron alloy strengthened and protected at high temperatures by the addition of aluminum. Its core characteristic is its exceptionally excellent resistance to oxidation, carburization, and sulfidation at extreme temperatures up to approximately 1250°C, while maintaining superior high-temperature strength and thermal stability. It is specifically designed for environments requiring long-term exposure to high-temperature corrosive atmospheres, such as high-temperature heat treatment equipment, industrial furnace components, combustion systems, petrochemical cracking tubes, and aerospace hot-end components. It is particularly suitable for harsh operating conditions involving alternating oxidation and reduction, making it a top-tier material for solving high-temperature oxidation and thermal fatigue problems.

 

Inconel 718 is a nickel-chromium-based high-temperature alloy strengthened by precipitation hardening with elements such as niobium and molybdenum. Its core feature is its ultra-high strength, excellent creep resistance, fatigue resistance, and good corrosion resistance at temperatures up to approximately 700°C. It is widely used in the manufacture of critical components subjected to extreme stress, high temperatures, and complex loads, such as aircraft engine turbine disks, blades, and casings, aerospace structural components, high-performance racing car parts, and oil and gas drilling tools. It is one of the most important and widely used high-temperature alloys in the aerospace and energy sectors.

 

inconel n06601 and inconel n07718 Chemical composition

Element

Inconel 601 (Mass Fraction, %)

Inconel 718 (Mass Fraction, %)

Nickel (Ni)

58.0-63.0

50.0-55.0

Chromium (Cr)

21.0-25.0

17.0-21.0

Iron (Fe)

Balance

Balance

Aluminum (Al)

1.0-1.7

0.20-0.80

Titanium (Ti)

0.20-0.60

0.65-1.15

Molybdenum (Mo)

≤0.50

2.80-3.30

Niobium (Nb) + Tantalum (Ta)

-

5.00-5.50

Carbon (C)

≤0.15

≤0.08

 

alloy 601 and alloy 718 Mechnical properties

Performance Indicator

Test Temperature

Inconel 601

Inconel 718

Tensile Strength (MPa)

Room Temperature

≥550

≥965

Yield Strength (MPa)

Room Temperature

≥240

≥550

Elongation (%)

Room Temperature

≥30

≥15

Tensile Strength (MPa)

650℃

≥380

≥895

Yield Strength (MPa)

650℃

≥180

≥510

 

High-Temperature Performance of Inconel 601 and Inconel 718
Inconel 601: Long-term working temperature can reach 1100℃, with a short-term maximum temperature of 1250℃. In high-temperature environments, it exhibits good oxidation resistance and creep resistance, primarily relying on the dense oxide film formed by chromium to resist high-temperature oxidation.

Inconel 718: The upper limit for long-term working temperature is 650℃, with a short-term maximum temperature of 800℃. Above 650℃, its precipitation strengthening phase (γ'' phase) decomposes, leading to a significant decrease in mechanical properties. However, below 650℃, its high-temperature creep strength and fatigue strength are superior to Inconel 601.

 

Corrosion Resistance of Inconel 601 and Inconel 718
Inconel 601: Its high chromium content gives it excellent oxidation resistance and resistance to gas corrosion. It can withstand oxidizing acids (such as nitric acid) and high-temperature sulfide environments, making it suitable for high-temperature corrosive environments in the chemical industry; however, its corrosion resistance in reducing acids (such as hydrochloric acid and sulfuric acid) is weaker.

Inconel 718: Containing molybdenum and niobium elements, in addition to a certain degree of oxidation resistance, it has better corrosion resistance to reducing acids, seawater, and salt spray environments, and exhibits good resistance to stress corrosion cracking, making it suitable for complex corrosive environments such as marine engineering and oil and gas extraction.

 

Why Choose Gnee as Your Nickel-Based Alloy Supplier

✅ Over 18 years of export experience, products sold to more than 80 countries

✅ Certified by ISO, SGS, and BV

✅ Global inventory of Inconel, Hastelloy, Incoloy, and Monel alloy tubing, plates, and bars

✅ Custom processing services available – including cutting, polishing, CNC machining, and packaging

✅ Fast delivery within 7-15 days, supported by global logistics partners

📦 Packaging and Shipping

All stainless steel products are packaged using the following methods:

Wooden pallets or crates

Moisture-proof packaging

Labels with furnace number, standard, and size labels

Shipped worldwide by sea, air, or express

Gnee Steel
 
 

About Gnee Steel

Gnee Steel is a professional manufacturer of nickel-based alloys, including Nickel 201, Nickel 202, Hastelloy C-276, Hastelloy C-22, Hastelloy B, Hastelloy C-4, Inconel 600, Inconel 625, Inconel 718, Inconel X-750, Incoloy 800, Incoloy 800H/HT, Incoloy 825, Monel 400, Monel K500, and other high-temperature alloy materials. We specialize in the production and sales of alloy materials. Gnee Steel's products are widely used in aerospace, chemical, power generation, automotive, nuclear energy, and other fields, and we can provide customized alloy material solutions according to customer needs. For inquiries about alloy material prices or customized alloy material solutions, please feel free to contact us via email at ss@gneemetal.com for a quote.

 
35000+

Square Meters Built

 
200+

Enterprise Employees

 
18+

Years Experience

 
160+

Partner countries

Send Inquiry

whatsapp

Phone

E-mail

Inquiry