Hastelloy C-4, also known as Hastelloy C-4, is a high-performance multi-component non-chromium corrosion-resistant and difficult-to-weld alloy that can be used to manufacture large engine parts, aviation and ship parts, regional reactors, automotive parts, catalysts, and has a wide range of uses.

Material brand: HastelloyC-4
German brand: W.Nr.2.4610
DIN brand: NiMo16Cr16Ti
American brand: UNS N06455
ISO brand: NiMo16Cr1Ti
Hastelloy C-4 has high heat resistance and can withstand extremely high temperatures, up to 1600°C. It can resist corrosive gases at lower temperatures, such as hydrogen sulfide, hydrogen chloride, etc. It can be used in an environment with a temperature of 700°C and has excellent heat resistance. At the same time, due to its excellent elastic plasticity, it has excellent impact resistance and overcomes the disadvantage of easy scratching.
In addition, Hastelloy C-4 also has excellent weldability, whether it is laser welding of metal materials or welding of electronic parts, it can be easily completed. And its surface treatment is also very easy, whether it is grinding, oxidation, coloring, polishing, frosting, it can be perfectly achieved, and it has a wide range of uses.
It has the following characteristics:
1. High stress corrosion strength: Due to the presence of aluminum and zirconium in AL-ZN alloy, the growth of grain boundary defects in the body can be well prevented, so that the material has a higher stress corrosion strength.
2. Strong resistance to high temperature oxidation: Since AL-ZN alloy has strong anti-oxidation ability, it can effectively prevent the oxidation reaction on the metal surface and make it have good anti-metallurgical oxidation performance.
3. Strong corrosion resistance: Since AL-ZN alloy has strong corrosion resistance at low temperature, it can effectively prevent more corrosion of the material and improve the service life of the material.
4. Good anti-friction performance: Polymer aluminum zirconium (AL-ZN) alloy has high anti-friction performance, which can effectively prevent material wear.
UNS N06455 is a relatively simple multi-alloy stainless steel for high temperature mechanical manufacturing, with excellent corrosion resistance and good mechanical properties. It also provides heat resistance, oxidation resistance and wear resistance, and can work normally in the range of 500-650 degrees Celsius.






