Dec 12, 2025 Leave a message

Datasheet-For-Inconel-600-1-7-(1)-1-6.pdf

Comparison of the composition of Inconel 600 and Incoloy 825 nickel alloy round bars

 
 
 
Comparison of the composition of Inconel 600 and Incoloy 825 nickel alloy round bars
Comparison of the composition of Inconel 600 and Incoloy 825 nickel alloy round bars
01.

Comparison of the composition of Inconel 600 and Incoloy 825 nickel alloy round bars

Inconel 600 round bars are a high-nickel alloy (at least 72% nickel content) containing a significant amount of chromium (Cr), providing high-temperature strength; while Incoloy 825 forged bars are a medium-nickel alloy (38-46% nickel content) containing more iron (Fe), as well as molybdenum (Mo) and copper (Cu), offering excellent acid/chloride resistance. Therefore, 825 bars are more suitable for corrosive aqueous environments (sulfuric acid/phosphoric acid), while 600 is better suited for extreme high-temperature/oxidizing conditions. This highlights the crucial trade-off between nickel-rich high-temperature performance and cost-effective corrosion resistance.

02.

What is the difference between Alloy 600 and Alloy 800?

Inconel Alloy 600 maintains good mechanical properties at low temperatures, but its strength at high temperatures may decrease compared to Incoloy 800. Therefore, the choice of which alloy to use depends on the mechanical performance requirements of your specific application.

Alloy 600 And Alloy 800

What is Inconel 600 bar?

Inconel 600 bar is a high-performance nickel-chromium-iron alloy bar profile with excellent high-temperature oxidation resistance (up to approximately 1150°C), superior resistance to chloride ion stress corrosion cracking, and good machinability. It is primarily used in the manufacture and processing of shafts, valve parts, furnace components, and corrosion-resistant structural parts that need to operate in extreme high-temperature and corrosive environments. It is a core raw material for high-reliability critical components in the chemical, nuclear power, heat treatment, and aerospace industries.

 

What is Incoloy 825 bar?

Incoloy 825 bar is a corrosion-resistant bar profile made of a nickel-iron-chromium alloy (Incoloy 825). By adding elements such as molybdenum, copper, and titanium, it is specifically optimized to resist mixed corrosive environments of strong reducing acids (such as sulfuric acid and phosphoric acid) and oxidizing acids (such as nitric acid). It exhibits excellent resistance to stress corrosion cracking and localized corrosion (such as pitting and crevice corrosion), making it particularly suitable for manufacturing components in harsh environments such as acidic oil and gas fields, chemical equipment, seawater cooling systems, and sulfuric acid production. It is a key engineering material for solving complex industrial corrosion problems.

 

Equivalent Grades: INCONEL 600 vs INCOLOY 825 Round Bars

Standard / Grade INCONEL 600 INCOLOY 825
UNS N06600 N08825
W.Nr. (Werkstoff Nr.) 2.4816 2.4858
JIS NCF 600 –
EN NiCr15Fe –
BS NA 14 NA 16
AFNOR NC15FEIIM NFE30C20DUM
GOST MHXMu 28-2 / 5-1 / 5 3n703
Other Common Designations – NCF825, XH38BT, Nicr2IMo

 

Chemical Composition Comparison: Incoloy 825 vs. Inconel 600 Round Bars

Element (% by mass) Incoloy 825 Inconel 600
Ni 38.0 – 46.0 72.0 min
Cr 19.5 – 23.5 14.0 – 17.0
Fe 22.0 min 6.0 – 10.0
Mo 2.5 – 3.5 –
Ti 0.6 – 1.2 –
Cu 1.5 – 3.0 0.5 max
Mn 1.0 max 1.0 max
C 0.05 max 0.15 max
S 0.03 max 0.015 max
Al 0.2 max –
Si 0.5 max 0.5 max
P – 0.045 max

 

Mechanical Properties Comparison: INCONEL 600 vs INCOLOY 825 Round Bars

Property INCONEL 600 Round Bar INCOLOY 825 Round Bar
Density – 8.14 g/cm³
Melting Point – 1400 °C (2550 °F)
Tensile Strength 550 MPa (min) 550 MPa (80,000 psi)
Yield Strength (0.2% Offset) 240 MPa (min) 220 MPa (~32,000 psi)
Elongation 30% (min) 30%

 

Application Of Incoloy 825 Round Bar

 

Oil and Gas
Chemicals
Power Plants
Nuclear Power Plants
Shipbuilding
Paper and Pulp

Application Of Incoloy 825 Round Bar
Applications of INCONEL 600 round bars

Applications of INCONEL 600 round bars

 

Chemical Industry

Coal Power Plants and Nuclear Power Plants
Fertilizer Plants
Aerospace
Food and Dairy Products Plants
Paper Industry
Oil and Gas Exploration
Seawater Desalination Plants
Pharmaceutical Plants

 

Why Choose Gnee as Your Nickel-Based Alloy Supplier

✅ Over 18 years of export experience, products sold to more than 80 countries

✅ Certified by ISO, SGS, and BV

✅ Global inventory of Inconel, Hastelloy, Incoloy, and Monel alloy tubing, plates, and bars

✅ Custom processing services available – including cutting, polishing, CNC machining, and packaging

✅ Fast delivery within 7-15 days, supported by global logistics partners

📦 Packaging and Shipping

All stainless steel products are packaged using the following methods:

Wooden pallets or crates

Moisture-proof packaging

Labels with furnace number, standard, and size labels

Shipped worldwide by sea, air, or express

 

Contact now

Gnee Steel also supplies custom Inconel 600 products in various sizes and specifications. Please send us your drawings for a quote!

 

About Gnee Steel

Gnee Steel is a supplier of Inconel 600 alloy, offering a wide range of products including: seamless pipe (sizes: 4-219 mm; thickness: 0.5-20 mm); welded pipe (sizes: 5.0-1219.2 mm; thickness: 0.5-20 mm); plates (thickness: 0.1 to 100 mm; width: 10-2500 mm); strips; alloy round bars (diameter: 3-800 mm); flat bars (thickness: 2-100 mm; width: 10-500 mm); hexagonal bars (size: 2-100 mm); wire rods; and extruded profiles. We collaborate with steel mills to provide our customers with Inconel 600 alloy products that meet or exceed numerous leading industry standards, including ASTM, ASME, SAE, AMS, ISO, DIN, EN, and BS standards.


Gnee Steel stocks and sells Inconel 600, pipes, plates, strips, round bars, flat bars, forged billets, hexagonal steel, wire rods, and extruded profiles. Please feel free to contact us at ss@gneesteel.com for a quote.

Gnee Steel

Send Inquiry

whatsapp

Phone

E-mail

Inquiry