ASTM B637 Inconel 718 Round Bar
video

ASTM B637 Inconel 718 Round Bar

Material Grade:Inconel 718
Product Form:Round Bar / Round Rod
Standard:ASTM B637
Delivery Condition:Solution Treated / Solution Annealed
Send Inquiry
Chat Now

As a leading supplier and manufacturer in China, GNEE Steel provides cost-effective nickel-based alloy products.

Product Introduction

 

what is ASTM B637 Inconel 718 Round Bar?

 

ASTM B637 Inconel 718 solution annealed round bar is a precipitation-hardenable nickel alloy product made from UNS N07718. Supplied in the solution-treated condition, it can be machined and subsequently precipitation hardened when higher strength is required.

 

GNEE STEEL supplies Inconel 718 round bars in customized diameters, lengths, delivery conditions and surface finishes. Chemical composition, mechanical testing and inspection documents can be arranged according to the applicable specification and purchase requirements.

 

Contact us for the latest export price quote for 601 Alloy

INCONEL® Alloy 718
Nickel Alloy 718 / Inconel 718 (UNS N07718)

 

Inconel 718 Round Bar Specifications

 

Item Specification
Material Grade Inconel 718
UNS N07718
Material Number 2.4668
Product Form Round Bar / Round Rod
Standard ASTM B637
Delivery Condition Solution Treated / Solution Annealed
Manufacturing Route Hot Rolled / Hot Forged / Cold Finished
Surface Condition Black, Peeled, Turned, Ground or Polished
Length Random Length or Cut-to-Length
Inspection Certificate EN 10204 3.1, as agreed

 

Chemical Composition of Inconel 718 Round Bar

 

Inconel 718 is a nickel-chromium alloy strengthened by niobium, molybdenum, titanium and aluminum additions.

Element Chemical Symbol Typical Composition (%)
Nickel Ni 50.00–55.00
Chromium Cr 17.00–21.00
Iron Fe Balance
Niobium + Tantalum Nb + Ta 4.75–5.50
Molybdenum Mo 2.80–3.30
Titanium Ti 0.65–1.15
Aluminum Al 0.20–0.80

 

The table shows commonly published Inconel 718 composition ranges. Final chemical acceptance must follow the specified ASTM B637 edition and the material test certificate.

 

Nickel Alloy - Inconel® 718

 

Mechanical Properties of Inconel 718 Round Bar (ASTM B637)

 

Condition Ultimate Tensile Strength, MPa 0.2% Yield Strength, MPa Elongation (2 in), % Reduction of Area, % Hardness
Solution Treated ≥ 965 ≥ 550 ≥ 30 ≥ 40 ≤ 277 HB
Solution Treated + Aged (Ø ≤127 mm) ≥ 1276 ≥ 1034 ≥ 12 ≥ 15 331–420 HB
Solution Treated + Aged (Ø 127–254 mm) ≥ 1240 ≥ 1000 ≥ 12 ≥ 15 331–420 HB

 

Physical Properties of Inconel 718 Round Bar

 

Property Typical Value
Density 8.19 g/cm³
Melting Range 1260–1336 °C
Modulus of Elasticity 199 GPa
Shear Modulus 77.2 GPa
Poisson's Ratio 0.294
Thermal Conductivity (20 ℃) 11.4 W/(m·K)
Specific Heat Capacity (20 ℃) 435 J/(kg·K)
Thermal Expansion Coefficient (20–100 ℃) 12.8 ×10⁻⁶ /℃
Electrical Resistivity 1.22 μΩ·m
Magnetic Permeability ~1.0011 (non-magnetic)

 

Inconel 718 (UNS N07718) round bar supplied to ASTM B637 relies on precipitation hardening to achieve high strength. Solution treated stock offers superior formability for customer secondary heat treatment, while solution-and-aged bars deliver the full design strength for gas turbine, oil & gas and aerospace components.

 

All values are longitudinal room-temperature minimum requirements, actual test values will be provided on 3.1 / 3.2 inspection certificates. High-temperature tensile and creep data are available on request for high-temperature design calculation.

 

Common Inconel 718 Round Bar Dimensions

 

Diameter (mm) Available Length
6–20 Random or Custom
21–50 Random or Custom
51–100 Random or Custom
101–200 Random or Custom
201–300 Subject to Manufacturing Feasibility
Above 300 Customized / Forged Bar

 

The dimensions above are inquiry references, not a guaranteed stock range. Actual availability depends on production route, material condition, required tolerances and order quantity.

 

 
Other Inconel 718 Bar Shapes
 

In addition to Inconel 718 Round Bar, GNEE STEEL can evaluate customized bar products in different cross-sectional shapes according to drawings and manufacturing requirements.

 

Product Shape Description Typical Applications
Round Bar Solid circular cross-section Shafts, fasteners and machined components
Hexagonal Bar Six-sided cross-section Custom fasteners and precision-machined parts
Square Bar Four equal sides Special structural and machined components
Flat Bar Rectangular cross-section Supports, brackets and fabricated parts

 

Available product forms: Inconel 718 Hexagonal Bar, Round Bar, Square Bar and Flat Bar.

Please provide the required width, height, diameter, length and dimensional tolerances for a manufacturing feasibility review.

Inconel 718 Hardness: The Beginner's Guide
Inconel 718 Round Bar
Inconel 718 Bar to ASTM B637 (UNS N07718 / 2.4668)
Inconel 718 Hexagonal Bar
Inconel 718 Hardness: The Beginner's Guide
Inconel 718 Square Bar
Inconel 718 Bar to ASTM B637 (UNS N07718 / 2.4668)
Inconel 718 Flat Bar

 

Inconel 718 Bar Delivery Conditions

 

Inconel 718 is a precipitation-hardenable alloy. Its delivery condition affects machinability, hardness and final mechanical properties. The required condition should be confirmed according to ASTM B637 and the component drawing.

 

Delivery Condition Description Typical Purchasing Purpose
Solution Annealed Solution heat treated Machining and subsequent aging
Solution Treated and Aged Solution treated followed by aging Higher strength in the delivered condition
Bright Annealed Annealed in a controlled atmosphere Bright surface and reduced oxidation
Solution Treated and Precipitation Hardened Solution treatment followed by precipitation hardening Components requiring specified aged properties

 

Important: Solution-treated material is not the same as fully precipitation-hardened material. If your component requires final high-strength properties, specify whether aging must be completed before delivery or performed after machining.

 

Inconel 718 Round Bar Surface Finishes

 

Different surface finishes are available depending on the machining process and application requirements.

 

Surface Finish Description Application
Pickled Chemical removal of surface scale and oxidation General industrial use
Pickled and Passivated Pickling followed by a specified passivation treatment Applications requiring controlled surface cleanliness
Mirror Polished High-reflectivity polished surface Components requiring a smooth, reflective finish
Brushed Finish Directional surface texture produced by mechanical finishing Components requiring a uniform brushed appearance

 

Surface finish requirements should be confirmed by specifying the desired appearance, surface roughness (Ra) and dimensional tolerances. The compatibility of any passivation process with Inconel 718 should be verified before production.

 

Applications of Inconel 718 Round Bar

 

Inconel 718 round bars are used to manufacture components requiring high strength, fatigue resistance and elevated-temperature performance.

 

  • Aerospace: Engine shafts, fasteners, structural components and machined parts.
  • Gas Turbines: Shafts, turbine components and high-strength fasteners.
  • Oil and Gas: High-strength connectors, fasteners and machined equipment components.
  • Industrial Machinery: Precision-machined parts operating under demanding mechanical conditions.

 

Final material selection should consider operating temperature, stress, fatigue loading, corrosion environment and required heat treatment.

 

Why Choose GNEE STEEL for Inconel 718 Round Bar?

 

Stock and Supply: Inquire about available Inconel 718 round bar sizes, material conditions and order quantities. Customized dimensions can be evaluated according to production feasibility.

 

 

Customized Processing: Cutting to length, turning, peeling, grinding and other agreed machining services can be arranged according to drawings and dimensional requirements.

 

Quality Inspection: Chemical composition, tensile properties, hardness, dimensional checks and additional inspections can be arranged according to the purchase specification.

 

ASTM B637 ASME SB637 UNS N07718 Round bars and rods

 

 

 

Packaging and Shipping

 

 

 

Inconel 718 Nickel Alloy - AMS 5662 - UNS N07718

  

Inconel 718 Round Bar Supplier | ASTM B637 / AMS 5662

  

GNEE STEEL welcomes inquiries for Inconel 718 round bars and customized bar shapes. To receive a quotation, please provide:

 

  • Material: Inconel 718 / UNS N07718
  • Standard: ASTM B637 and required revision
  • Product shape: Round, hexagonal, square or flat bar
  • Diameter or cross-sectional dimensions
  • Required length and quantity
  • Delivery condition: Solution treated or solution treated and aged
  • Surface finish and dimensional tolerances
  • Inspection and certification requirements

 

Request A Quote For ASTM B637 Inconel 718 Round Bar

 

Send your specifications or technical drawings to GNEE STEEL for material confirmation, production evaluation and quotation.

Hot Tags: ASTM B637 Inconel 718 Round Bar, China ASTM B637 Inconel 718 Round Bar suppliers, inconel alloy for drums, inconel alloy for motors, inconel alloy for studs, inconel alloy for turbines, inconel alloy plating, inconel alloy transportation

Send Inquiry

whatsapp

Phone

E-mail

Inquiry