Incoloy 800 Incoloy 800h Incoloy 800ht Nickel Alloy Sheet
As a leading supplier and manufacturer in China, GNEE Steel provides cost-effective nickel-based alloy products.
- Send E-mail: ss@gneesteel.com
- Tel: +8615824687445
Incoloy800 Typical values (Weight %)
| Cr | Ni | C | Si | Mn | P | S | Fe |
| 19.0-23.0 | 30.0-35.0 | ≤0.10 | ≤1.00 | ≤1.50 | ≤0.030 | ≤0.015 | Margin |
Incoloy800 Mechanical Properties
| TemperatureºC | σ/ MPa | σ0.2 / MPa | δ5 /% |
| 100 | 425 | 140 | 160 |
| 300 | 390 | 95 | 115 |
| 500 | 360 | 80 | 110 |
| 600 | 300 | 75 | 95 |
Incoloy800 Physical Properties
| Melting Temperature Range | 1350-1400ºC | |||
| Specific Heat | 455J/(kg.ºC) | |||
| Thickness | 8.0g/lcm³ | |||
| Magnetism | / | |||
Incoloy 800H Close to the Brand
| GB/T | UNS | Trademark | W.Nr |
| NS112 | N08810 | Incoloy800H | 1.4876 |
Incoloy800H Typical Values (Weight %)
| Alloy | % | Ni | Ge | Fe | C | Mn | Si | Cu | S | Al | Ti | P |
| Incoloy800H | Min | 30 | 19 | Margin | 0.05 | 0.15 | 0.15 | |||||
| Max | 35 | 23 | 0.1 | 1.5 | 1 | 0.75 | 0.015 | 0.6 | 0.6 | 0.03 |
Incoloy800H Physical Properties
| Thickness | 8.0 g/cm3 | |
| Melting Point | 1350-1400 ºC | |
Incoloy 800HT Close to the Brand
| UNS | Trademark | W.Nr | |
| NO8811 | Incoloy 800HT | 1.4954 | |
Incoloy800HT Typical Values (Weight %)
| Alloy | % | Ni | Ge | Fe | C | Mn | Si | Cu | S | Al | Ti |
| Incoloy800HT | Min | 30 | 19 | 0.05 | 0.15 | 0.15 | |||||
| Max | 35 | 23 | Margin | 0.1 | 1.5 | 1 | 0.75 | 0.015 | 0.6 | 0.6 |
800HT Minimum value of mechanical properties of alloys at room temperature
| Alloy | Strength of Extension (Rm N/mm²) | Yield Strength (RPO.2N/mm²) | Ductility (A5%) | |||||||
| 800HT | 450 | 180 | 35 | |||||||
Custom Case
Hot Tags: incoloy 800 incoloy 800h incoloy 800ht nickel alloy sheet, China incoloy 800 incoloy 800h incoloy 800ht nickel alloy sheet suppliers, incoloy alloy toughness, incoloy alloy quality, incoloy alloy advantage, incoloy alloy melting point, alloy 825 tubing, Incoloy 901
You Might Also Like
Send Inquiry