Spot Goods Nr. 1.4958 Alloy Tube For Heat Treatment Equipment Incoloy 800ht Pipe
As a leading supplier and manufacturer in China, GNEE Steel provides cost-effective nickel-based alloy products.
- Send E-mail: ss@gneesteel.com
- Tel: +8615824687445
Features
▪ Resistance to prolonged exposure to elevated temperatures
▪ Excellent resistance to oxidation, sulfidation, and carburization
▪ Added Carbon and annealing treatment allows for higher creep and rupture properties above 600ºC
▪ Resistant to high temperature corrosion
▪ Readily machined by standard methods
▪ Best joined/welded using products for high temperature situations
▪ Resistance to aqueous corrosion at moderate temperatures
Incoloy 800ht Application
▪ Chemical and Petrochemical Processing-process equipment for the production of ethylene, ethylene dichloride, acetic anhydride, ketene and oxy-alcohol
▪ Petroleum Refining-steam/hydrocarbon reformers and hydrodealkylation units
▪ Power Generation-steam super-heaters and high temperature heat exchangers in gas-cooled nuclear reactors, heat exchangers and piping systems in coal-fired power plants
▪ Thermal Processing Fixtures-radiant tubes, muffles, retorts and fixtures for heat-treating furnaces
Incoloy 800ht Key Features:
Corrosion Resistance: The addition of nickel & chromium to 800HT ensures excellent carburization, oxidation, & sulfidation.
Organic Media Resistance: This alloy also flaunts great resistance to widely found organic media components such as acetic, formic, as well as propionic acids.
High Heat Fabrication: Alloy 800HT is known to fabricate easily in high heat between 1200°F & 1600°F. However, anything below this leads to improper fabrication.
High Resistance to Creep Rupture: Incoloy 800HT has better creep-rupture resistance strength as compared to Alloy 800 given the close control for Al, Ti, & C.
Incoloy 800ht Specifications
| Trademark | GB | GOST | ASTM | UNS | DIN | W.Nr. | NF | BS | JIS | SS |
| Incoloy 800HT | NS1102 NS112 |
- | Incoloy 800HT | N08811 | X10NiCrAlTi32-20 | 1.4959 | - | NA15H | - | - |
Incoloy 800ht Chemical Composition
| Alloy | C | Si | Mn | P | S | Cr | Ni | Al+Ti | Ti | Fe |
| Incoloy 800HT | 0.06-0.10 | ≤0.10 | ≤3.00 | ≤0.03 | ≤0.02 | 19.0-23.0 | 30.0-35.0 | 0.25-1.20 | 0.15-0.60 | ≥39.5 |
Incoloy 800ht Mechanical Properties
| Density, g/cm3 | Melting Point, ºC | Tensile Strength, MPa | Yield Strength, MPa | ELongation, % | Hardness, HB |
| 8.00 | 1357-1375 | 531 | 200 | 52 | - |
Incoloy 800ht Forms And Standards
| Rod, Bar, Wire and Forgings | ASTM B408/ASME SB408, ASTM B564/ASME SB564, ISO 9723/9724/9725 |
| Plate, Sheet and Strip | ASTM A240/A480/B409/B906/ASME SA240/SA480/SB409/SB906, ISO 6208 |
| Pipe and Tube | ASTM B163/ASME SB163, ASTM B407/B829/ASME SB407/SB829, ASTM B514/B775/ASME SB514/SB775, ASTM B515/B751/ASME SB515/SB751, ISO 6207 |
| Welding Product | - |
| Others | ASTM B366/ASME SB366(Fittings) |
Available Sizes And Specifications
| Incoloy 800HT available sizes and specifications | |
| Grade | Incoloy 800HT |
| Nickel plate | Thickness: 0.3mm - 150.0mm Width: 1000mm - 3000mm |
| Nickel strip/ nickel foil | Thickness: 0.02mm - 16.0mm Width: 5mm - 3000mm |
| Nickel coil | Thickness: 0.3mm - 16.0mm Width: 1000mm - 3000mm |
| Nickel pipe | Outside diameter: 6mm - 1219mm Thickness: 0.5mm - 100mm |
| Nickel Capillary Pipe | Outside diameter: 0.5mm - 6.0mm Thickness: 0.05mm - 2.0mm |
| Nickel bar | Diameter: Ф4mm - Ф600mm |
| Nickel wire rod | Diameter:Ф0.01mm - Ф6mm |
Custom Case
Hot Tags: spot goods nr. 1.4958 alloy tube for heat treatment equipment incoloy 800ht pipe, China spot goods nr. 1.4958 alloy tube for heat treatment equipment incoloy 800ht pipe suppliers, alloy 825 tubing, incoloy alloy scientist, incoloy alloy zinc content, incoloy alloy procedure, incoloy alloy manufacturing, incoloy alloy purity
You Might Also Like
Send Inquiry