Cupro Nickel 70/30 Round Bar
As a leading supplier and manufacturer in China, GNEE Steel provides cost-effective nickel-based alloy products.
- Send E-mail: ss@gneesteel.com
- Tel: +8615824687445
70/30 Copper Nickel Bar are capable of sustaining very high pressures. The Elongation at Break of Copper Nickel 70/30 Round Bar is 45.0% and its Shear Modulus is 8270 ksi (57.0 GPa). 70/30 Cu-Ni Rods has an Ultimate Tensile Strength of 54000-75000 psi (372-517 MPa) and it has a Yield Tensile Strength of 12800-70100 psi (88.0-483 MPa). UNS C71500 Hex Bar thermal conductivity is 29 W/m°K. The Elastic Modulus of 70 30 Cu Ni round bar is 21800 ksi (150 GPa) and its Poisson's Ratio is 0.34. ASTM B151 Cupro Nickel 70/30 Forged Bars can be welded by using various welding processes such as seam welding, coated metal arc welding, gas shielded arc welding, brazing, oxyacetylene welding, soldering, butt welding and spot welding.
70/30 Copper Nickel Bar specifications
| Specifications | ASTM B151, ASME SB151, UNS C71500, DIN 2.0882 |
| Standards | MIL-C-15726F, ASTM B 151, Tempers 060 Soft & H01 Hard |
| Dimensions | EN, DIN, JIS, ASTM, BS, ASME, AISI |
| Range | 5 mm To 500 mm thick in 100 mm TO 6000 mm |
| Cu-Ni 70/30 Round Bars | 6 mm to 120 mm. |
| Cu-Ni 70/30 Square Bars | 10 mm to 200 mm. |
| Cupro Nickel 70/30 Solid Bar | 1/4" - 12" diameter |
| Range | 10 mm To 150 mm Dia in 100 mm TO 1000 mm Length |
| Finish | Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish |
| Length | 100 mm to 3660 mm Long |
| Form | Round, Rod, Precision Ground Bar, Square, Round Rod, Hollow, Hex (A/F), Triangle, Rectangle, Threaded, T-Bar, Half Round Bar, Flat Bar, Rings, Blocks, Billet, Ingot, I/H Bar, Angle, Channel Bar, Profiles, Forging Etc. |
| Tolerance | H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients' requirements |
| Surface | Hot Rolled Pickled or Sand Blasting Finished, Cold Drawn, Bright, Polished, Hairline |
| Condition | Cold Drawnd Pulished Cold Drawn Centreless Ground & Polished, Annealed round bar |
| Technique | Copper Nickel 70/30 Hot Rolled, Cold Rolled, Cold Drawn, Forged Round Bar, Rod |
| Test Certificate | Mill Test Certificate as per EN 10204 / 3.1, NACE MR0175/ISO 15156 |
70/30 Copper Nickel Bar sizes
|
|
GNEE Steel Copper Nickel Round Bar Factory
Hot Tags: cupro nickel 70/30 round bar, China cupro nickel 70/30 round bar suppliers, 200 stainless nickel and alloy piping, Ni 201, Nickel 200, nickel tubing 200, stainless and nickel alloy piping, nickel 201 piping
You Might Also Like
Send Inquiry