What material is Monel K500 (corresponding grade yield strength) K500
Monel K500 Monel alloy
Monel K500 mechanical properties effect, Monel K500 nickel-based corrosion-resistant alloy Monel K500 corresponds to the brand ajrph99422. (30) 0Cr26Ni5Mo2; (31)
00Cr18Ni5Mo3Si2; This chapter briefly explains the corrosion resistance of Monel K500 alloy, the standard composition of Monel K500, and the size specifications of Monel K500. These characteristics may be more or less
Few factors affect the price of Monel K500. Of course, the price of Monel K500 alloy also includes Monel K500 hardness, Monel K500 density and Monel K500 heat treatment status.
Wait; if you can bear the trouble, call Shanghai Yehan Alloy hotline: - one-stop service for Monel K500 corrosion-resistant alloy, - one-stop purchase of Monel
K500 stainless steel corrosion-resistant alloy.
After understanding the definition of Monel K500 plate, let us take a look. As a global supplier of Monel K500, Yehan Alloy not only establishes cooperative relationships with steel mills, but also
We have a sound domestic supply network to meet your various needs:
High-temperature kilns (1000 ~ 1150°C) use water-cooled shafts and heat-resistant steel furnace rollers with thermal insulation lining, or fully water-cooled furnace rollers. In order to prevent the furnace rollers from bending, rollers working at high temperatures must
Rotate continuously; when the furnace is empty or does not discharge material, it should also swing or rotate at a low speed of 0.5 to 1.5 cycles per minute. Because the material is heated on both sides, the roller hearth furnace heats faster and more evenly.
Uniform, widely used in heat treatment processes such as normalization, annealing, quenching, and tempering.
Next, let's take a look at the technical specifications and chemical elements of Monel K500 as follows:
Nel K-500 Chemical composition of Monel K-500: Monel K500 similar brands UNS TrademarkN05500 MonelK500
Chemical composition of Monel K500:
Alloy % Nickel Copper Aluminum Titanium Iron Manganese Sulfur Carbon Silicon
Monle K500 small 63 27.0 2.30 0.35
Big 33.0 0.85 2.0 1.5 0.01 0.25 0.5
Physical properties of Monel K500: Density 8.05 g/cm3 Melting point 1288-1343°C
The minimum value of the mechanical properties of Monel K500 at room temperature: alloy and state tensile strength Rm N/mm2 yield strength RP0.2N/mm2 elongation
A5 %Monel K500 1100 790 20
This alloy has the following properties: Monel K500 has the same corrosion resistance as Monel 400, but has higher mechanical strength and hardness. Has good hot corrosion resistance and
Long-term organizational stability. Mainly used for manufacturing turbine blades and gas turbine blades on aero engines with operating temperatures below 750°C; for manufacturing fasteners and springs on ships;
Pumps and valve parts on chemical equipment; scraper blades on papermaking equipment, etc.
