Hastelloy C2000 is a nickel-chromium-molybdenum-copper (Ni-Cr-Mo-Cu) superalloy developed by Haynes International. It is a member of the Hastelloy "C-series" alloys, specifically engineered to deliver exceptional all-around corrosion resistance in the harshest chemical environments.
Unlike some other Hastelloy grades that focus on specific media, Hastelloy C2000 is designed for "universal" corrosion resistance, meaning it performs well in both oxidizing and reducing environments-an advantage that makes it stand out among nickel-based corrosion-resistant alloys.
Key material characteristics include:
Broad-spectrum corrosion resistance: Resists both strong oxidizing acids (e.g., nitric acid, chromic acid) and strong reducing acids (e.g., sulfuric acid, hydrochloric acid), as well as mixed acids, chlorine, and seawater.
Stability in complex media: Maintains performance in environments with fluctuating pH values, high chloride concentrations, and crevice corrosion-prone conditions.
Balanced mechanical properties: Offers good tensile strength, ductility, and weldability, with moderate high-temperature resistance (suitable for service up to ~650°C/1202°F).
Typical applications include chemical processing equipment (reactors, heat exchangers, pipelines), oil and gas downstream facilities, pharmaceutical manufacturing, and seawater desalination systems-where exposure to aggressive, multi-component media is common.
The chemical composition of Hastelloy C2000 is precisely optimized to achieve its broad corrosion resistance. Below is the typical nominal composition (in weight percentage, wt%), compliant with industry standards such as AMS 5878 and ASTM B622:
The unique combination of high Cr (for oxidation), high Mo (for reduction), and Cu (for acid specificity) is what enables Hastelloy C2000 to resist both oxidizing and reducing environments-setting it apart from many single-purpose corrosion-resistant alloys.
The hardness of Hastelloy C2000 is primarily determined by its heat treatment condition and microstructure, which is austenitic (face-centered cubic, FCC) with minimal precipitates (to preserve corrosion resistance). Unlike precipitation-hardening alloys, it relies on solid-solution strengthening, so its hardness range is relatively stable across common processing states.
Annealing is the most common condition for Hastelloy C2000, as it optimizes corrosion resistance and ductility. The standard annealing process involves:
Heating to 1150–1200°C (2102–2192°F) for 30–60 minutes.
Rapid cooling (water quenching or air cooling) to retain a fully austenitic microstructure and prevent carbide precipitation.
Hardness values in the annealed state:
Brinell Hardness (HB): ~210–250
Rockwell Hardness (HRC): ~20–26
Vickers Hardness (HV): ~220–260
Hastelloy C2000 can be cold-worked (e.g., rolling, drawing) to increase its hardness and strength, though this may slightly reduce ductility. The hardness increases with the degree of cold work:
Light cold work (10–20% reduction): HB ~260–300, HRC ~27–32
Moderate cold work (20–30% reduction): HB ~300–340, HRC ~32–36
Note: Cold working is typically used for components requiring higher mechanical strength (e.g., fasteners), but it may need post-work annealing if maximum corrosion resistance is critical.
After welding (a common processing method for Hastelloy C2000), the heat-affected zone (HAZ) may experience slight hardness changes:
Weld metal hardness: Similar to the annealed base metal (HB ~220–240).
HAZ hardness: Slightly higher than the base metal (HB ~240–260) due to localized heating and cooling, but this does not significantly impact corrosion resistance or service performance.