Nov 19, 2025 Leave a message

What Is C60800 Copper? 5% Aluminum Bronze for Tubes

What Is C60800 Copper?

C60800, commonly known as 5% Aluminum Bronze, is a wrought copper-aluminum alloy in which aluminum is the principal addition at 5.0%–6.5%. It belongs to the single-phase alpha aluminum bronze family, which means it has a uniform, ductile microstructure and cannot be hardened by heat treatment; strength is developed through cold work. The alloy is notable among wrought copper alloys for its deliberate arsenic addition, which protects it against dezincification and improves corrosion resistance in polluted or sulfur-bearing waters. Its combination of corrosion resistance, good thermal conductivity, and moderate strength makes it a long-standing material for tube and plate heat-exchange service.

Chemical Composition

The composition of C60800 is closely controlled to balance corrosion resistance, ductility, and formability. The specified ranges are: copper 92.5%–95.0% (balance), aluminum 5.0%–6.5%, arsenic 0.02%–0.35%, iron 0.10% maximum, lead 0.10% maximum, with total residuals limited to 0.5% maximum. The aluminum provides strength and oxidation resistance, while arsenic enhances resistance to dezincification in aggressive waters.

Properties and Temper

In the O61 (annealed) temper, C60800 offers an ultimate tensile strength of about 390 MPa (57 ksi) and a yield strength of about 150 MPa (21 ksi), with a modulus of elasticity of roughly 110 GPa. Its density is approximately 8.6 g/cm3, thermal conductivity is about 80 W/m·K, and electrical conductivity is approximately 17% IACS, which supports efficient heat transfer in condenser and heat-exchanger duty. Because the alloy is single-phase, annealing restores ductility and cold drawing increases strength and hardness; the final temper is selected to match the required service pressure and fabrication method.

Applications in Heat Exchange and Marine Service

C60800 is primarily used for seamless condenser and heat-exchanger tubes, evaporator tubes, salt-water piping, and ferrule stock. It performs well in seawater and brackish water service and resists attack in many industrial cooling waters, which is why it has served power plants, desalination facilities, and marine engineering for decades. Its good thermal conductivity means less surface area is needed for a given heat load, and its resistance to corrosion prevents premature tube failure and maintenance downtime.

Standards and Selection Notes

The governing specification for C60800 seamless condenser and heat-exchanger tubes is ASTM B111, technically identical to ASME SB-111. Integral-finned tube forms are covered by ASTM B359, and plate and sheet products by ASTM B171 as applicable. When selecting C60800, specify the required temper, tube dimensions, and any supplemental testing (eddy-current, hydrostatic, or flattening tests) called for in the procurement document. For higher-strength requirements, cold-drawn tempers provide increased tensile values over the annealed condition.

FAQ

What is C60800?

C60800 is the UNS designation for 5% Aluminum Bronze, a single-phase wrought copper alloy with 5.0%–6.5% aluminum and a deliberate arsenic addition.

Why is arsenic added to C60800?

Arsenic protects the alloy against dezincification and improves its corrosion resistance in polluted and sulfur-bearing waters.

Is C60800 heat treatable?

No. C60800 is a single-phase alpha aluminum bronze, so it cannot be hardened by heat treatment; strength is increased by cold working.

What is C60800 used for?

It is used mainly for seamless condenser tubes, heat exchanger tubes, evaporator tubes, salt-water piping, and ferrules.

Which standard covers C60800 tubes?

ASTM B111 (ASME SB-111) covers C60800 seamless condenser and heat exchanger tubes; ASTM B359 covers integral-finned tubes.

What is the tensile strength of annealed C60800?

In the O61 annealed temper, C60800 has an ultimate tensile strength of about 390 MPa (57 ksi) and a yield strength of about 150 MPa (21 ksi).

Send Inquiry

whatsapp

Phone

E-mail

Inquiry