What material is 601 stainless steel made of?
Inconel601 nickel-based alloy, high temperature resistant material.
Inconel 601 Introduction:
Inconel 601, a nickel-based alloy material. It has excellent oxidation resistance at high temperatures, good carbonization resistance, good oxidation resistance in sulfur-containing atmospheres, good mechanical properties at room temperature and high temperature, and good stress corrosion cracking resistance. Due to the controlled carbon content and grain size, 601 has higher creep rupture strength, so it is recommended to use 601 in areas above 500°C.
Inconel 601 corresponding grades:
UNS N06601, W.Nr.2.4851, NS3103/ NS313, 1Cr23Ni60Fe13Al, NCF601 (Japanese)
Inconel 601 has the following features:
1. Excellent oxidation resistance at high temperatures
2. Excellent carbonation resistance
3. Good resistance to oxidation in sulfur-containing atmospheres
4. It has good mechanical properties at both room temperature and high temperature.
5. Excellent resistance to stress corrosion cracking. Due to the control of carbon content and grain size, 601 has high creep rupture strength, so it is recommended to use 601 in areas above 500°C.
Inconel 601 metallographic structure:
601 is a face-centered cubic lattice structure.
Inconel 601 Corrosion Resistance:
An important property of 601 alloy is its oxidation resistance at temperatures up to 1180°C. Even under very severe conditions, such as during heating and cooling cycles, 601 can form a dense oxide film and achieve high peeling resistance. 601 has good carbonation resistance. Due to its high chromium and aluminum content, 601 has good oxidation resistance in high-temperature sulfur-containing atmospheres.
Inconel 601 application areas:
1. Trays, baskets and fixtures used in heat treatment factories.
2. Wire strand annealing and radiant tubes, high speed gas burners, wire mesh belts in industrial furnaces.
3. Isolation tanks in ammonia reforming and catalytic support grids in nitric acid manufacturing.
4. Exhaust system components
5. Combustion chamber of solid waste incinerator
6. Pipe supports and soot disposal components
7. Exhaust gas detoxification system components
8.Oxygen reheater
