ASTM International has specific standards for nickel-based alloy pipes, including those made from Inconel. The primary standard depends on the Inconel grade, but a common one is:
ASTM B829: Standard Specification for Seamless and Welded Nickel-Chromium-Molybdenum-Columbium Alloy (UNS N07718) Pipe and Tube.
This standard covers Inconel 718 pipes and tubes, specifying requirements for chemical composition, mechanical properties (tensile strength, elongation), dimensions, and testing (e.g., pressure testing, corrosion resistance).
Other grades have their own ASTM standards:
Inconel 600: ASTM B163
Inconel 625: ASTM B444
Inconel 825: ASTM B423
Inconel's high cost stems from several key factors:
Raw Material Costs: Nickel is the primary element in Inconel (typically 50% or more by weight), and nickel is a relatively rare and expensive metal. Prices for nickel are volatile but consistently higher than iron (the base of steel) or even chromium. Additional alloying elements like molybdenum, niobium, or tungsten-used to enhance strength and corrosion resistance-are also costly.
Complex Manufacturing Processes: Producing Inconel requires precise alloying, melting (often in vacuum or inert gas environments to avoid contamination), and heat treatment to achieve its unique properties. These steps are energy-intensive and require specialized equipment, driving up production costs.
Processing Challenges: Inconel's high strength and work-hardening tendency make machining, forming, and welding difficult. Specialized tools, slower production speeds, and skilled labor are needed, adding to fabrication expenses.
Low Supply vs. Demand: Inconel is critical for high-performance industries (aerospace, energy, chemical processing), but its production volume is lower than steel, creating supply constraints that inflate prices.
No, Inconel 718 is highly resistant to rust (corrosion by oxygen and moisture), though it is not entirely immune to all forms of corrosion.
Rust specifically refers to the oxidation of iron, and while Inconel 718 contains small amounts of iron (~18-20%), its high nickel (~50-55%) and chromium (~17-21%) content form a protective chromium oxide layer on its surface. This layer acts as a barrier, preventing further oxidation of iron or other elements.
However, Inconel 718 can still corrode in extreme conditions, such as exposure to concentrated sulfuric acid or high-temperature chlorine environments, but this is not classified as "rust." Its resistance to general rusting makes it far more durable than carbon steel in wet or humid environments.




No, Inconel is not the strongest metal, but it is among the strongest at high temperatures.
Strength depends on context (e.g., tensile strength at room temperature vs. high temperature, or resistance to impact). For example:
Titanium alloys and tungsten have higher tensile strength at room temperature than most Inconel grades.
Carbon fiber-reinforced polymers (CFRPs) are stronger per unit weight.
Magnesium alloys are weaker but lighter.
Inconel's strength lies in its ability to retain high mechanical strength at extreme temperatures (up to 1,000°C or more) and resist creep (slow deformation under stress), which makes it invaluable in jet engines, gas turbines, and nuclear reactors. For high-temperature applications, few metals match Inconel's performance, but it is not the strongest overall.