1. What is Hastelloy C276 material?
2. What does the "C" mean in alloy C276?
3. What is the ASTM equivalent of Hastelloy C276?
UNS N10276: Its Unified Numbering System identifier.
Standards like ASTM B575 (welded nickel-alloy pipe), ASTM B574 (forgings), ASTM B619 (welded tubes), and ASTM B576 (plate, sheet, and strip) all specify requirements for Hastelloy C276 in different product forms.




4. What is the chemical composition of Hastelloy C276 pipe?
Nickel (Ni) as the base (approximately 57%),
Chromium (Cr) between 14.5–16.5%,
Molybdenum (Mo) at 15.0–17.0%,
Tungsten (W) at 3.0–4.5%,
Cobalt (Co) up to 2.5%,
Iron (Fe) between 4.0–7.0%,
Trace elements like manganese (Mn ≤1.0%), silicon (Si ≤0.08%), carbon (C ≤0.01%), phosphorus (P ≤0.04%), and sulfur (S ≤0.03%).
This composition balances corrosion resistance from chromium and molybdenum with strength from nickel and tungsten, while low carbon content minimizes carbide precipitation during welding.
5. What is the corrosion rate of C276?
In most inorganic acids (e.g., hydrochloric, sulfuric, phosphoric) at room temperature, corrosion rates are below 0.1 mm/year (0.004 inches/year). Even at elevated temperatures in concentrated acids, rates often stay below 0.5 mm/year (0.02 inches/year).
It shows exceptional resistance to chloride solutions, wet chlorine, hypochlorite, and oxidizing agents like ferric/copper salts, with minimal pitting or crevice corrosion. For example, in 10% sulfuric acid at 100°C, the rate is around 0.2 mm/year, and in 5% hydrochloric acid at 80°C, it is ~0.1 mm/year.
Proper welding practices maintain this resistance, as improper techniques could slightly increase localized corrosion due to microstructural changes.





