What are the differences between Inconel 601 and Incoloy 800 round bars?

What are the differences between Inconel 601 and Incoloy 800 round bars?
Inconel 601 round bar is a high-nickel alloy bar (with a nickel content exceeding 60%), possessing excellent high-temperature strength and oxidation resistance due to its high chromium content and added aluminum, making it ideal for furnace components. Incoloy 800 alloy bar, on the other hand, is a nickel-iron-chromium alloy (with a nickel content of approximately 40%), which is less expensive and offers good creep strength and localized corrosion resistance, making it an ideal choice for heat exchangers and process piping, especially in applications where a balance between cost and performance is crucial. The main difference between the two is that Inconel 601 bars have a higher nickel content and better oxidation resistance, while Incoloy 800 bars are iron-based, less expensive, and offer superior creep resistance under specific conditions.
What is the maximum operating temperature of Incoloy 800?
If the deformation is 5% or more, the hot working temperature range for Incoloy alloys 800H and 800HT is 1740–2190°F (950–1200°C). If the hot deformation is less than 5%, the recommended hot working temperature range is 1560–1920°F (850–1050°C).

Inconel 601 bar is a bar-shaped profile made from a nickel-chromium-iron-aluminum reinforced alloy (Inconel 601). Its core characteristic is its unparalleled resistance to oxidation, carburization, and high-temperature sulfur corrosion at extreme temperatures up to approximately 1250°C, while maintaining good high-temperature strength and machinability. It is primarily used in the manufacture and processing of critical components that require long-term exposure to severe oxidizing-reducing atmospheres and thermal cycling, such as high-temperature heat treatment furnace components, industrial combustion systems, petrochemical cracking units, and aerospace hot-end components. It is a high-performance raw material specifically designed for ultra-high temperature environments.
Incoloy 800 rod is a bar-shaped profile made from a nickel-iron-chromium austenitic alloy (Incoloy 800/800H/800HT). Its core characteristic is its excellent resistance to creep, carburization, and high-temperature oxidation at temperatures up to approximately 815°C, while maintaining good strength and thermal stability. It is specifically used in the manufacture and processing of critical components that require long-term exposure to high-temperature corrosive atmospheres and mechanical stress, such as high-temperature heat treatment furnace components, petrochemical cracking tubes, industrial heaters, and nuclear power steam generators. It is a high-performance raw material specifically designed to address high-temperature oxidation and thermal fatigue issues.
Comparison of chemical composition between Inconel 601 rods and Incoloy 800 round bars
| Element | Inconel 601 Rod (UNS N06601) | Incoloy 800 Round Bar (UNS N08800) |
|---|---|---|
| Nickel (Ni) | 58.0 – 63.0 % | 30.0 – 35.0 % |
| Chromium (Cr) | 21.0 – 25.0 % | 19.0 – 23.0 % |
| Iron (Fe) | Balance | ≥ 39.5 % |
| Aluminum (Al) | 1.0 – 1.7 % | 0.15 – 0.60 % |
| Carbon (C) | ≤ 0.10 % | ≤ 0.10 % |
| Titanium (Ti) | ≤ 0.15 % | 0.15 – 0.60 % |
| Manganese (Mn) | ≤ 1.0 % | ≤ 1.5 % |
| Silicon (Si) | ≤ 0.5 % | ≤ 1.0 % |
| Copper (Cu) | ≤ 1.0 % | ≤ 0.75 % |
| Sulfur (S) | ≤ 0.015 % | ≤ 0.015 % |
| Phosphorus (P) | – | ≤ 0.045 % |
| Nitrogen (N) | – | – |
| Al + Ti | – | 0.30 – 1.20 % |
Inconel 601
Composition: High nickel-chromium alloy with added aluminum, providing enhanced oxidation resistance.
Main Features: Excellent oxidation and spalling resistance at extremely high temperatures (up to 1204°C).
Incoloy 800 (and its variants 800H/HT)
Composition: Nickel-iron-chromium alloy (nickel content less than 50%).
Main Features: Good strength and resistance to oxidation, carburization, and corrosion by hot acids (such as sulfuric acid).
Variants: 800H/HT: Higher creep and stress rupture strength, with higher carbon/titanium/aluminum content for improved stability.
Comparison of physical properties of Inconel 601 rods and Incoloy 800 rods
| Physical Property | Inconel 601 Rod (Annealed) | Incoloy 800 Round Bar (Annealed) |
|---|---|---|
| Density (g/cm³) | 8.11 | 7.94 |
| Melting Range (°C) | 1300 – 1370 | 1350 – 1400 |
| Modulus of Elasticity (GPa) | 210 | 200 |
| Thermal Conductivity (W/m·K, at 20°C) | 11.2 | 11.8 |
| Coefficient of Thermal Expansion (×10⁻⁶/K, 20–100°C) | 12.6 | 14.4 |
| Electrical Resistivity (μΩ·m, at 20°C) | 1.18 | 1.02 |
| Specific Heat (J/kg·K, at 20°C) | 444 | 460 |
| Magnetic Permeability | Typically non-magnetic | Typically non-magnetic |
| Poisson's Ratio | 0.29 | 0.30 |
Applications of Inconel 601 rods and Incoloy 800 rods
| Field / Application | Inconel 601 Rod | Incoloy 800 Round Bar |
|---|---|---|
| Industrial Furnaces & Heat Treatment | Radiant tube supports, muffles, annealing tray frames, sintering belt rollers, kiln furniture shafts | Radiant tubes, furnace rollers, retort supports, conveyor system shafts, heat exchanger tube sheets |
| Chemical & Petrochemical Processing | Catalyst grid supports, chlorination reactor internals, high‑temperature acid‑handling components | Steam reformer tube supports, pyrolysis furnace internals, cracking tube hangers |
| Power Generation | Combustor liner brackets, HRSG tube supports, boiler baffle rods, superheater hanger rods | Superheater tube supports, boiler header studs, steam piping hangers, nuclear steam generator bolts |
| Aerospace & Gas Turbines | Combustion chamber mounting rods, afterburner liner supports, turbine seal rings, exhaust duct fasteners | Combustor casing bolts, exhaust manifold studs, turbine casing brackets |
| Pollution Control & Incineration | Incinerator grate bars, thermal oxidizer support rods, flue gas duct hangers | Incinerator internals, waste heat recovery system brackets, scrubber column tie‑rods |
| Glass & Ceramic Manufacturing | Sintering tray frames, glass melting furnace stirrer rods, kiln roller shafts | Glass tank reinforcement rods, molding press columns, kiln car axles |
| Steel & Metal Processing | Annealing cover tie‑rods, roller hearth shafts, galvanizing pot support rods | Continuous annealing line rollers, soaking pit cover bolts, heat‑treating basket frames |
| Nuclear Energy | Control rod guide shafts, high‑temperature reactor core supports, spent‑fuel handling tooling | Steam generator stay rods, reactor vessel internals bolts, heat exchanger tie‑bars |
| Oil & Gas (High‑Temperature) | Downhole instrumentation housings, wellhead studs in sour service, thermal recovery tubing supports | Downhole valve stems, wellhead flange studs, sour‑gas piping bolts |
Why Choose Gnee as Your Nickel-Based Alloy Supplier
✅ Over 18 years of export experience, products sold to more than 80 countries
✅ Certified by ISO, SGS, and BV
✅ Global inventory of Inconel, Hastelloy, Incoloy, and Monel alloy tubing, plates, and bars
✅ Custom processing services available – including cutting, polishing, CNC machining, and packaging
✅ Fast delivery within 7-15 days, supported by global logistics partners
📦 Packaging and Shipping
All stainless steel products are packaged using the following methods:
Wooden pallets or crates
Moisture-proof packaging
Labels with furnace number, standard, and size labels
Shipped worldwide by sea, air, or express

About Gnee Steel
Gnee Steel is a professional manufacturer of nickel-based alloys, including Nickel 201, Nickel 202, Hastelloy C-276, Hastelloy C-22, Hastelloy B, Hastelloy C-4, Inconel 600, Inconel 625, Inconel 718, Inconel X-750, Incoloy 800, Incoloy 800H/HT, Incoloy 825, Monel 400, Monel K500, and other high-temperature alloy materials. We specialize in the production and sales of alloy materials. Gnee Steel's products are widely used in aerospace, chemical, power generation, automotive, nuclear energy, and other fields, and we can provide customized alloy material solutions according to customer needs. For inquiries about alloy material prices or customized alloy material solutions, please feel free to contact us via email at ss@gneemetal.com for a quote.
Square Meters Built
Enterprise Employees
Years Experience
Partner countries





