Nov 04, 2025 Leave a message

GH3030.pdf

Understanding Antioxidant GH3030 High Temperature Alloy Rods

 
Understanding Antioxidant GH3030 High Temperature Alloy Rods

Understanding Antioxidant GH3030 High Temperature Alloy Rods

 

Antioxidant GH3030 high-temperature alloy bars are a nickel-chromium-based high-temperature alloy, renowned for their excellent high-temperature strength, outstanding oxidation resistance, and good machinability. They are mainly used in demanding applications such as aerospace, chemical, and nuclear industries.

What are the components of GH3030?

 

Composition: The main components are nickel, chromium, and iron. Properties: It exhibits high strength and good corrosion resistance over a wide temperature range.

GH3030

GH3030 Introduction

GH3030 is a solution-strengthened superalloy, an early development of the 80Ni-20Cr solution-strengthened superalloy. It has a simple chemical composition, satisfactory high strength and high plasticity below 800℃, and good resistance to oxidation, thermal fatigue, cold stamping, and welding. After solution treatment, the alloy is a single-phase austenitic alloy with stable microstructure during use. The main product is cold-rolled sheet, but bars, rings, wires, and tubes are also available. It is primarily used for turbine engine combustion chamber components operating below 800℃ and other high-temperature components requiring oxidation resistance but bearing relatively low loads below 1100℃. GH3030 has strong hot and cold working properties and is used to manufacture various chemical equipment and related accessories.

 

CHEMICAL COMPOSITION OF High Temperature Gh3030 Bar:
Grade C Mn Si S Ti Fe Ni Cr P Al
GH3030 0.12 max 0.70 max 0.80 max 0.02max 0.15-0.35 1.5max balance 19.00 – 22.00 0.03 0.15

 

1. The standard for GH3030 bars and ring billets specifies that Cu ≤ 0.20%.

2. The standard for GH3030 hot-rolled plates, cold-rolled plates, cold-rolled strips, tubes, wires, and cold-drawn wires for cold heading specifies that Fe ≤ 1.00%, P ≤ 0.015%, S ≤ 0.010%, Pb ≤ 0.001%, and Cu ≤ 0.007%.

 

GH3030 - UNS GH30 / XH78T High Temperature Alloy Equivalent Grades

CHINA STANDARD WERKSTOFF NR. UNS GOST AFNOR JIS BS EN OR
GH3030 – GH30 ЭИ435 – – – – –

 

GH3030 - UNS GH30 / XH78T High Temperature Alloy Mechanical Properties

Element Yield Strength (0.2%Offset) Melting Point Density Tensile Strength Elongation
GH3030 MPa – 1420 °C 8.4 g/cm3 MPa – 785 Min 35 %

 

GH3030 Heat Treatment: Solution treatment temperature is 980–1020℃. Cooling method: air cooling for hot-rolled plates, cold-rolled sheets, and ring billets; water cooling or air cooling for cold heading wires and cold-drawn bars; water cooling for tubes.

 

GH3030 Product Specifications and Supply Status: Various specifications of deformed products can be produced. Bars and ring billets are delivered without heat treatment; hot-rolled plates, cold-rolled sheets, and tubes are supplied after solution treatment and pickling; welding wire is delivered in coils in cold-drawn, solution-treated and pickled, or semi-hard states; cold heading wire is delivered in coils or straight strips in solution-treated and pickled states, or in polished or cold-drawn states in solution-treated straight strips; tubes are delivered in solution-treated and pickled states; cold-drawn bars are delivered in annealed, annealed and pickled, annealed and polished, or cold-drawn states.

 

GH3030 Melting and Casting Processes: Electric arc furnace melting, electric arc furnace melting plus electroslag remelting, or vacuum arc remelting; non-vacuum induction furnace melting plus electroslag melting, vacuum arc furnace remelting, or vacuum duplex process.

 

GH3030 Application Overview and Special Requirements: This alloy has undergone long-term service testing in aero-engines, primarily used in combustion chamber and afterburner components, as well as casing mounting edges and other components.

 

Why Choose Gnee Nickel Alloy (Supplier Example)?

✅ Large stock of GH 3030 stainless steel strip/coil available for fast shipping.

✅ Factory direct sales, highly competitive prices, excellent value for money.

✅ Comprehensive quality assurance: Material Testing Certificate (MTC), Chemical Composition Certificate, and Mechanical Properties Certificate.

✅ Value-added services: Slitting, Cutting, Polishing, Surface Treatment.

✅ Worldwide shipping, secure and reliable packaging, and provision of export documentation.

Email: ss@gneemetal.com

Gnee Steel

 

About Gnee Steel

Gnee Steel is a professional manufacturer of various nickel-based alloys, including Nickel 201, Nickel 202, Hastelloy C-276, Hastelloy C-22, Hastelloy B, Hastelloy C-4, Inconel Alloy 600, Inconel 625, Inconel 718, Inconel X-750, Incoloy Alloy 800, Incoloy 800H/HT, Incoloy 825, Monel Alloy 400, Monel K500, and high-temperature alloys. We specialize in the production and sales of alloy materials. Gnee Steel's products are widely used in aerospace, chemical, power, automotive, and nuclear energy industries, and we can provide customized alloy material solutions according to customer needs. For alloy material price inquiries or to request customized alloy material solutions, please feel free to contact us at ss@gneemetal.com for a quote.

Send Inquiry

whatsapp

Phone

E-mail

Inquiry