Jun 24, 2025 Leave a message

The Information About Copper Alloy Tube

1.How Do I Know Which Type of Copper Tubing to Use?

To determine which type of copper tubing you should use for a particular application, consider the strength, formability, wall thickness, and other mechanical factors. Plumbing and mechanical codes will also determine which type should be used in your project.

2.What is the Difference Between Types K, L, M, and DWV?

Type K

Type K has the thickest walls out of all copper tubing. It is used in main water lines, as well as fire protection, oil, HVAC, and many more applications throughout the construction industry. Its durability and wall thickness are why it helps withstand pressures felt in water lines and underground installations. To comply with governance standards, the color code for Type K is green and meets ASTM B 88 Standard.

Type L

Type L is considered the most common type of copper tubing. While it does not have as thick of walls as Type K, it does have thicker walls than Type M. It is best for interior plumbing applications as well as fire protection and various HVAC applications. Type L is traditionally used with CopperPress®, by Merit Brass Co.'s fittings and valves. To comply with governance standards, the color code for Type L is blue and meets ASTM B 88 Standard.

Type M

Type M has a thinner wall compared to both Type K and Type L. Because of its low costs, ease of use, and malleability, Type M is often used for repairs, replacements, and extensions to interior water supply lines as well as residential applications. To comply with governance standards, the color code for Type M copper tubing is red and meets ASTM B 88 Standard.

Type DWV (Drain, Waste and Vent)

DWV is approved for use only in drain and vent lines typically found in older homes; it is not used in water systems. DWV has thinner walls than Type K, Type L, and Type M; and a maximum pressure rating of 15 PSI. To comply with governance standards, the color code for DMV is yellow and meets ASTM B 306.

info-441-440info-446-447

info-446-447info-445-446

3.What Applications Is Copper Tubing Used In?

Types K and L are often used in compressed air, natural gas, and liquified petroleum (LP) gas applications. Type K is used for underground applications while Type L is used for interior applications. While Types K, L, and M are all suited for the following applications, there is a preferred type to use. Type M is preferred for domestic water service applications. Type L is preferred for fuel/fuel oil applications. Type L is preferred for HVAC applications. Type DWV is used for drain, waste, and vent applications as it has the thinnest wall compared to Types K, L, and M.

4.What is the Different Between Hard & Soft Temper?

The term temper describes the strength and hardness of the tubing.

Hard Temper

Hard Temper, often referred to as "drawn", is joined by soldering, brazing or welding. Tubing in the hard temper condition can also be joined by a variety of mechanical joins that can be assembled without the use of the heat source that is typically required by soldering and brazing.

Soft Temper

Soft Temper, often referred to as "annealed", is joined by the same techniques as hard temper but is also joined using flare-type and compression fittings. Just like the hard temper condition, the soft temper condition can be joined by a variety of mechanical joints without the heat source used by soldering and brazing. It is also extremely malleable because the annealing process softens the tube.

Send Inquiry

whatsapp

Phone

E-mail

Inquiry