Dec 25, 2025 Leave a message

Tensile Strength and Yield Strength of Monel

How Do the Tensile Strength and Yield Strength of Monel Alloys Change with Temperature?

The tensile strength and yield strength of Monel alloys (a nickel-copper alloy series) follow a regular changing trend with temperature variations, which is closely related to their inherent metallurgical structure and thermal stability. The specific trend is as follows:
In the low to medium temperature range (typically from cryogenic temperature to 400°C)

Monel alloys maintain high thermal stability. Both tensile strength and yield strength remain at a high level and show a slight downward trend as temperature rises. The reason is that in this temperature interval, the alloy's crystal structure does not undergo phase transformation, and the decrease in strength is mainly caused by the weakening of atomic bonding force and the acceleration of dislocation movement with increasing temperature.

For example, Monel 400, the most common grade, has a tensile strength of approximately 550–650 MPa and a yield strength of about 240–310 MPa at room temperature. When the temperature rises to 400°C, its tensile strength decreases by about 10%–15%, and the yield strength decreases by about 15%–20%.
In the high temperature range (above 400°C and below its melting point)

Both tensile strength and yield strength decline significantly with the continuous increase of temperature. When the temperature exceeds 600°C, the strength drops sharply. This is because the atomic thermal motion intensifies, the grain boundary bonding force weakens, and the alloy begins to appear obvious creep phenomenon, which leads to the rapid loss of its load-bearing capacity.

In addition, some high-performance Monel grades (such as Monel K-500 after aging treatment) have better high-temperature strength retention due to the precipitation of strengthening phases (e.g., Ni₃Al), and their strength decline rate is slower than that of Monel 400 in the same high-temperature environment.
info-445-442info-445-440
info-445-440info-443-442
In the cryogenic temperature range (below 0°C)

Unlike many metals that become brittle at low temperatures, Monel alloys still have excellent toughness. Meanwhile, their tensile strength and yield strength increase slightly as the temperature decreases, because the low temperature inhibits the movement of dislocations, making the alloy harder and stronger.

Send Inquiry

whatsapp

Phone

E-mail

Inquiry