Grade 2 Titanium: An Overview
Grade 2 titanium is an unalloyed, commercially pure (CP) titanium grade registered as UNS R50400. It offers an excellent combination of corrosion resistance, weldability, formability, and moderate strength, which makes it the most widely used titanium grade for industrial service. Its mechanical properties are defined by international standards, principally ASTM B348 for bars and forgings and ASTM B265 for sheet, plate, and strip. Grade 2 is supplied in the annealed condition for the great majority of applications, and the strength values quoted below are the minimum requirements for that condition, so they represent the guaranteed floor rather than a typical or maximum value.
Tensile and Yield Strength Requirements
The minimum mechanical requirements for annealed Grade 2 titanium are as follows.
| Property | Minimum Requirement |
|---|---|
| Tensile strength (UTS) | 345 MPa (50,000 psi) |
| Yield strength (0.2% offset) | 275 MPa (40,000 psi) |
| Elongation at break | 20% |
Typical annealed material exceeds these minima, with tensile strengths commonly in the range of 400 to 550 MPa. The moderate strength of Grade 2, roughly two-thirds to half that of alpha-beta alloys such as Ti-6Al-4V, is a deliberate design feature: it comes with outstanding ductility, easy forming and welding, and excellent resistance to seawater, chlorides, and a wide range of process chemicals, which is why the grade dominates chemical, marine, and desalination equipment rather than highly loaded aerospace structures.
Hardness of Grade 2 Titanium
The hardness of Grade 2 titanium is relatively low compared with alloyed titanium grades, reflecting its ductile nature. Published typical values are approximately 110 to 150 HB Brinell and about 60 to 80 HRB Rockwell B, with a corresponding Vickers hardness of roughly 140 to 160 HV. Hardness varies slightly with the manufacturing route, the annealing practice, and the section thickness, so a single universal value should not be assumed; for specification purposes, hardness is normally reported on the mill certificate for the actual heat and product form, and the three hardness scales should always be cross-checked for consistency when data from different sources are compared.
Factors That Affect Strength and Hardness
Several factors move the strength and hardness of Grade 2 titanium within its published range. Oxygen is the most effective strengthener in commercially pure titanium, and the interstitial oxygen content is the main reason that Grade 2 is stronger than Grade 1 but less ductile; iron content has a similar, smaller effect. Cold working raises strength and hardness at the expense of ductility, and heavily worked material must be annealed to restore the specified minimum elongation. Section thickness matters because heavier sections cool more slowly and have a slightly coarser structure. Finally, temperature changes the properties in service: tensile and yield strength fall as temperature rises, while ductility improves, so design allowables at elevated temperature must be taken from the applicable code or standard rather than from room-temperature values.
Applications of Grade 2 Titanium
Because of its corrosion resistance and moderate strength, Grade 2 titanium is the default choice for process equipment handling seawater, brines, chlorine, oxidizing acids, and other aggressive media. Typical applications include shell-and-tube and plate heat exchangers, reactor vessels and linings, piping and fittings in chemical plants and refineries, anodes and cathodes in electrochemical and chlor-alkali plants, desalination plant tubing, marine shafts and fasteners, and architectural cladding where both durability and appearance are required. In the medical field, the biocompatibility of commercially pure titanium supports its use in implants and surgical instruments, although higher-strength grades are specified where load-bearing performance demands more than Grade 2 can offer.
FAQ
What is the difference between Grade 1 and Grade 2 titanium?
Both are commercially pure titanium. Grade 1 has lower oxygen and iron content, giving it the highest ductility and formability of the CP grades but lower strength. Grade 2 has slightly higher interstitial content, providing about 25 percent more strength while retaining good formability, which is why Grade 2 dominates industrial applications.
What standards govern Grade 2 titanium?
ASTM B265 covers sheet, plate, and strip; ASTM B348 covers bars and billets; and ASTM B381 covers forgings. The grade is also registered as UNS R50400 and covered by ISO 5832-2 for surgical implant applications.
Why is Grade 2 titanium stronger than Grade 1?
The difference comes mainly from the interstitial oxygen content. Oxygen dissolved in the titanium lattice blocks dislocation movement, raising strength and hardness while slightly reducing ductility, which is exactly the balance the different CP grades use to adjust properties.
Does cold working affect the strength of Grade 2 titanium?
Yes. Cold working increases tensile and yield strength and hardness through work hardening, but it reduces ductility. Material that has been heavily formed should be annealed afterward to restore the specified elongation and to stabilize the structure for subsequent welding or service.
Is Grade 2 titanium suitable for marine and seawater service?
Yes. Grade 2 titanium is essentially immune to seawater corrosion, including crevice corrosion and stress corrosion cracking in most marine environments, and it is widely used for heat exchanger tubing, shafts, fasteners, and other marine components.
How does temperature affect the strength of Grade 2 titanium?
Strength decreases and ductility increases as temperature rises. Room-temperature minima of 345 MPa tensile and 275 MPa yield apply at ambient conditions; elevated-temperature design values must be taken from the applicable code or standard for the specific service temperature.





