nickel-molybdenum-chromium alloy UNS N10276 Coils: An
nickel-molybdenum-chromium alloy UNS N10276, registered as UNS N10276, is a nickel-molybdenum-chromium alloy with a tungsten addition, and one of the most versatile corrosion-resistant materials available for aggressive chemical service. As a coil product, nickel-molybdenum-chromium alloy UNS N10276 is supplied in strip form to ASTM B575 and ASME SB575, with typical thicknesses from 0.1 mm to 10 mm and widths from 600 mm to 2000 mm, and it is used across the chemical, petrochemical, pharmaceutical, marine, and waste-processing industries. The alloy resists a broad range of corrosive media in both oxidizing and reducing conditions, resists pitting and crevice attack in chloride environments, keeps its strength at high temperature, and welds without post-weld heat treatment. These properties make C276 coils a dependable choice for process equipment, lined vessels, heat exchangers, and fabricated components in some of the most demanding industrial service.
Specification and Chemical Composition
The specification data for nickel-molybdenum-chromium alloy UNS N10276 coils are summarized below, with the chemical composition per ASTM B575.
| Property | Value |
|---|---|
| Standard | ASTM B575 / ASME SB575 |
| Density | 8.89 g/cm3 |
| Melting point | 1370–1395 °C |
| Tensile strength (annealed, min) | 690 MPa |
| Yield strength (annealed, min) | 283 MPa |
| Elongation | 40% |
| Hardness | Rockwell B 100 max |
| Element | Composition (wt %) |
|---|---|
| Nickel | 57 min |
| Molybdenum | 15.0–17.0 |
| Chromium | 14.5–16.5 |
| Iron | 4.0–7.0 |
| Tungsten | 3.0–4.5 |
| Cobalt | 2.5 max |
| Manganese | 1.0 max |
| Vanadium | 0.35 max |
| Phosphorus | 0.04 max |
| Silicon | 0.08 max |
| Carbon | 0.01 max |
| Sulfur | 0.03 max |
The high molybdenum and tungsten levels give the alloy its resistance to reducing media and localized attack, while chromium supports performance in oxidizing conditions.
Corrosion and High-Temperature Performance Advantages
The first and best-known advantage of C276 coils is their exceptional corrosion resistance. The nickel-molybdenum-chromium matrix protects against a wide range of acids, alkalis, and salts in both oxidizing and reducing environments, including sulfuric, hydrochloric, and phosphoric acids, without performance degradation. In chloride-bearing service, the high molybdenum content gives the alloy strong resistance to pitting, and the chromium and nickel additions protect against crevice corrosion, which is why C276 is standard for offshore engineering, shipbuilding, and chemical plants exposed to seawater. The second performance advantage is high-temperature stability: the alloy maintains its mechanical properties above 1000 °F (540 °C), where many metals lose strength, making it suitable for furnaces, reactors, and heat exchangers. This stability reduces the frequency of replacement and cuts long-term operating cost. In addition, C276 possesses exceptional mechanical strength across extreme temperatures, with good ductility, so components withstand thermal cycling and mechanical stress without premature failure.
Weldability, Applications, and Supply Considerations
C276 is highly valued for its weldability. It can be joined by gas tungsten arc welding (GTAW) and shielded metal arc welding (SMAW) without preheating or post-weld heat treatment, which simplifies fabrication of complex, custom-shaped equipment and shortens production schedules. The combination of corrosion resistance, high-temperature capability, and mechanical strength explains the wide use of C276 coils across industries: chemical processing for corrosive chemicals and acids, pharmaceuticals where corrosion cannot be tolerated in cleanroom environments, marine engineering where materials are continuously exposed to chlorides and salts, and oil and gas extraction, refining, and transportation where both heat and corrosion resistance are required. For procurement, C276 coil is available in standard widths and thicknesses with mill certification to ASTM B575, and established supply channels for sheet and coil products help keep project schedules on track; specifying the correct thickness, width, and condition, and requesting the mill test report, are the practical steps that protect both quality and delivery.
Seven Advantages at a Glance
| Advantage | Why It Matters |
|---|---|
| 1. Superior corrosion resistance | Handles acids, alkalis, and salts in oxidizing and reducing media |
| 2. High-temperature stability | Keeps properties above 540 °C for furnace and reactor duty |
| 3. Excellent weldability | GTAW and SMAW without preheat or post-weld heat treatment |
| 4. Pitting and crevice resistance | Performs in high-chloride and seawater environments |
| 5. Cross-industry versatility | Chemicals, pharmaceuticals, marine, oil and gas, waste processing |
| 6. Exceptional mechanical strength | Survives thermal cycling and high stress with good ductility |
| 7. Reliable supply and long service life | Standard coil formats reduce lead time and replacement cost |
Frequently Asked Questions
Is nickel-molybdenum-chromium alloy UNS N10276 magnetic? nickel-molybdenum-chromium alloy UNS N10276 is not magnetic in the annealed state, but it may become slightly magnetic after cold working or welding. This behavior is normal for the alloy and does not affect corrosion resistance.
What is the difference between nickel-molybdenum-chromium alloy UNS N10276 and C22? Both are nickel-molybdenum-chromium alloys with outstanding corrosion resistance. C276 has higher molybdenum and tungsten, while C22 has higher chromium, which gives it better resistance in some oxidizing media and makes it preferred for certain bleach and acid service. The right choice depends on the specific environment.
Can C276 coils be used above 540 °C? The alloy retains useful mechanical properties above 540 °C, and the practical limit depends on stress and atmosphere. For long-term structural duty at very high temperatures, the corrosion and oxidation behavior should be reviewed against the specific service conditions.
Does welded C276 require heat treatment? No. A key advantage of C276 is that welded joints do not require preheating or post-weld heat treatment, which simplifies fabrication and avoids the risk of sensitization during field work.
What standards cover nickel-molybdenum-chromium alloy UNS N10276 coil? Sheet, plate, and strip, including coil, are covered by ASTM B575 and ASME SB575. The alloy is registered as UNS N10276 and is also covered by several international standards for specific product forms.
Why does C276 resist pitting and crevice corrosion so well? The high molybdenum content, 15.0 to 17.0 percent, plus tungsten, stabilizes the passive film in chloride environments, while chromium provides additional protection, together giving C276 its strong resistance to localized attack.





